Заваръчна маса VEVOR, 18 x 36, преносима работна маса за заваряване с товароподемност 1200lb, 0,11 дебел и просторен плот, регулируемо колело за лесно преместване, допълнителен среден рафт за удобно съхранение

Name: Заваръчна маса VEVOR, 18 x 36, преносима работна маса за заваряване с товароподемност 1200lb, 0,11 дебел и просторен плот, регулируемо колело за лесно преместване, допълнителен среден рафт за удобно съхранение
Brand: VEVOR
SKU: 0840281557912
Price: 633.19 EUR
Availability: InStock

Brand:VEVOR

2.9/5

lv
633.19

Тази здрава маса за ръчно заваряване може да се използва многократно, включително гараж, дом, работилница, за да отговори на различни нужди и има висока товароносимост, за да работи сигурно. Освен това аксесоарите за масата за заваряване са изработени от отлична стомана, отличаваща се с голяма стабилност и издръжливост.

Няма налични единици

EAN: 0840281557912

Категории Наръчни средства и домашно обзавеждане, Строителни материали, Материална обработка, Работни маси,

Широко приложение: Металната работна маса е идеална за проекти за ремонт на автомобили като удряне, оцветяване, пробиване, заваряване и рязане. Допълнителен рафт за съхранение: Фабричната маса на VEVOR има регулируем рафт за съхранение, който ви дава повече място за съхранение. Може да се регулира с четири отвора, предлага достатъчно място за съхранение, за да поставите всичките си инструменти. Практични колела: 4 колелца със система за заключване поддържат масата на място и правят движението лесно. Гъвкавата работна станция значително подобрява вашата работна ефективност. Просторен плот: Работната маса за заваряване на VEVOR осигурява достатъчно място за различни инструменти за работилница със своя голям плот с размери 18 x 36. Специално проектиран кръгъл ъгъл, за да не се нарани детето случайно. Премиум въглеродна стомана: Подсилена маса за заваряване със стоманена рамка с дебелина 0,11 издържа тегло до 1200 lbs. Той е здрав и издръжлив за тежкотоварно оборудване.

Assembly required	Yes
Batteries required	No
Brand	VEVOR
Color	Blue + Black
Customer Reviews	3.9 3.9 out of 5 stars 42 ratings 3.9 out of 5 stars
Finish Type	Painted
Finish types	Painted
Frame Material	Alloy Steel
Item Depth	36 inch
Item Dimensions LxWxH	37.4 x 20.5 x 3.7 inches
Item model number	18" x 36" Welding Table
Item Weight	46 Pounds
Load Capacity	1200 pound
Manufacturer	VEVOR
Material	Carbon Steel
Product Dimensions	18"D x 36"W x 35"H
Product Dimensions	37.4 x 20.5 x 3.7 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с^*

Вашата оценка

Scritto da: Michael Stoner

Good tables with a few drawbacks.

First off, these are good tables for the price and I would recommend them. I bought 4 of these. Here is what I found. Pros: 1. Decent paint job on the blue areas. I feel like it will hold up well. Raw metal on top. 2. Sturdy but .... (see cons) 3. I like the adjustable tray down below. 4. Its metal top is easy to ground your work on. 5. Easy to assemble 6. It's a table, it tables well. Cons: 1. Sturdy...but I doubt it will hold the weight it describes in the description. But if you are looking to put a half ton + on a $100 table made in china, you need to have your head examined. I feel 500 lbs is the limit of comfortable here. 2. The failure point is going to be on the legs where the casters attach. There is a small square of metal tacked (not fully welded) at the bottom of the leg in 3 or 4 locations. The welds are small and spatter is everywhere. 3. Spatter prevented casters from seating properly on 25% of the legs across the 4 that I purchased. A quick tap with a hammer and cold chisel popped the spatter off but left a tiny area exposed for rust. 4. Casters are ok for plastic casters. However the locking mechanism doesn't do a sufficient job of preventing the caster from rolling. Left me chasing my table with a flap disc on an angle grinder a few times. 5. One of the 4 tables I purchased had an extra nut but missing washer. Not a big deal. 6. Too small and too few washers in my opinion. Flat washers are provided for each bolt (1 per bolt but you need 2. One for bolt and 1 for nut). the heads of the bolts are uncomfortably close in size to the holes. If you go gorilla on the bolts, I feel you could pull it through the holes on the legs. Spend 50 cents and throw a few more washers on there. You will need 8 extra. 7. Packaging is a box. That's it. One of the 4 I purchased had the center tray edge slightly bent during shipping since there is nary a styrofoam pad to be found. A few whacks with a soft mallet fixed it right up though. I know all that sounds bad, but really it's a good little table for the price. I would buy it again without question and wouldn't hesitate to suggest it to another for basic home welding work.

Scritto da: Macario Alvarado

Can't Beat the Price

This was the cheapest I found. The bolts are not great quality. I was able to use all the bolts but one. I had spare bolts around so used that but it would be a good idea to replace them all with better quality bolts. I could see the wheels themselves giving out at some point if too much weight is put on it. I didn't replace anything but that one bolt. It's a good table for a hobbyists welder and at an affordable price.

Scritto da: Brian

Good table, you will need to replace the hardware.

Same feedback as others, the leg hardware is small and doesn't come with washers. For about $8 at the hardware store I got nylon locking nuts, washers and lock washers for everything and it went together really well and is super sturdy. Great table for home/garage and it fit my vice and equip perfectly.

Scritto da: K. GREATHOUSE

Undersized hardware

Structural pieces all seem to be good quality. Hardware for the shelf is all undersized. It is slotted and the washer wants to slide into the slot on one side when tightening. There should be two washers for each bolt as well since there is a slot on the shelf and the leg but there isn't. Doesn't include washers for the weld top, which is also slotted.

Scritto da: DMP

Excellent value

This table is an excellent value. As others have said some of the bolts are too small for the slots but I just added some washers that I had on hand which worked just fine. The table is sturdy and I have a welder and plasma cutter sitting on the bottom shelf. This is much cheaper than similar options but works great.

Scritto da: CWA

Could be great but . . . .

So the build quality is pretty good. This could be a really nice item if not for the silly mistakes. Such as: One of the bolt holes wasn't fully punched out. Luckily i was able to punch it out myself. Also, the bolts for the center shelf are way to small for the holes and they only come with one washer. I had to add a washer to each one because if i hadn't, the would no doubt loosen up eventually and probably pull through. There were no lock washer either. For a mobile cart thats as top heavy as this one is, it's foolish not to use them. Lastly, the casters can't be fully tightened because the securing nut on the caster itself is so thin that the body of the caster is so close to the leg that you cant get in between to hold it while tightening the nut on top. Horrible design and im sure I'll have to tighten them regularly or try to find flat wrench of some kind. An example of how a few cheap saves can ruin an otherwise well made product.

Scritto da: TurboDog

Disappointed

I believe the table will work for me, but I had to buy replacement hardware and wheels, making the table significantly more expensive than the purchase price. The short comings I see in this product are: 1. No instructions. Even though it is not rocket science to assemble a work table, not providing instructions and parts list is not something a quality company would do. 2. One side of the black top piece was not completely painted. Not sure if rust will be an issue, but will update my review if it is. 3. As other reviewers have noted, the hardware included for assembly is of poor quality and the washers for attaching the shelves are too small to work properly. Ended having to go to the hardware store to buy appropriate replacements, adding to the cost of the table. 4. Pictures in the listing show the cart having rubber wheels. When mine arrived it had cheap plastic wheels that I have absolutely no faith in. Ended up buying rubber replacement wheels, adding over 30% to the cost of the table. Should have just paid more up front for a better model.

Scritto da: Michael G.

Great tables

These are pretty great tables.. the only thing i can say is that the hardware included is small and needs to be replaced. I knew about this prior to ordering cause of the reviews. But otherwise a great little table