Витла Turning Point 21431730 Алуминиево витло Hustler с 4 лопатки за двигатели 40-150 к.с. с скоростна кутия 4,25 - 13,25 x 17, дясна опора LE1/LE2-1317-4, черна, 2X-голяма

Brand:Turning Point Propeller

3.3/5

lv
388.03

Витла на Turning Point LE1/LE2-1317-4 Алуминиево витло Hustler с 4 лопатки за двигатели 40-150 к.с. с скоростна кутия 4,25 е дясно витло и има диаметър 13,25 и стъпка 17. Реквизитът, който постави "четворката" в Performance! Four Blade Hustler на Turning Point революционизира пазара на алуминиеви витла, когато беше представен преди повече от 6 години. Никой досега не е произвеждал най-съвременния дизайн на Swept Cleaver за приложения с 40-150 HP. Тези подпори пренаписаха правилата, доказвайки, че можете да управлявате четирилопатков, който има безпрецедентен удар в дупка, управление и стабилност в груба вода без загубата на скорост от най-висок клас, която изпитвате с витлата на други производители. Тези подпори на Turning Point също произвеждат до 46% повече обратна тяга в сравнение с други сравними конструкции при скорошни тестове. Серията остриета Hustler 4 е идеална за всяко приложение, което изисква подобрено ускорение, завиване и възможности за носене на товари. Тази серия реквизити е идеално подходяща за водни спортове, лодки с кърмово задвижване, tri-toons, лодки за залив и всеки плавателен съд, който може да използва кърмово повдигане. Това е най-добрият ни ъпгрейд на по-стари алуминиеви конструкции от 70-те, 80-те, 90-те и 2000-те и ще изпревари повечето по-нови реквизити, включително пет блейд ски реквизита.

Номер на витлото: LE1/LE2-1317-4. Диаметър: 13,25; Стъпка: 17. Дясно витло. За двигатели 40-150 к.с. със скоростна кутия 4.25. Алуминиево витло от серия Hustler с 4 остриета.
Brand ‎Turning Point Propeller
Customer Reviews 4.3 4.3 out of 5 stars 63 ratings 4.3 out of 5 stars
Item model number ‎21431730
Item Weight ‎5.6 pounds
Manufacturer ‎Turning Point Propeller
Manufacturer Part Number ‎21431730
Model ‎21431730
Product Dimensions ‎13.25 x 6.75 x 14.25 inches

3.3

8 Review
5 Star
61
4 Star
17
3 Star
14
2 Star
5
1 Star
4

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: JJ
Good Prop
Put on a 2019 Tracker Pro Guide V175 with 115 Mercury FourStroke. Overall, I like the prop. I get on plane much quicker and it didn't affect my top speed or fuel economy. It was really easy to install and everything is included with the hub kit. My only complaint so far is that one trailing edge on one of the blades was very rough. It wasn't bad enough to worry with sending it back. Otherwise, I am quite impressed with the performance and it was cheaper than the comparable Mercury prop.
Scritto da: Juli R. Lacina
could not get the right pitch for 115hp mercury
The difference between 15 and 17-in pitch was huge. One resulted in inability to hit a reasonable RPM at wide open throttle and the other redlined under 30 mph. My three blade 17-in pitch topped out at 47 mph right at max RPM . I couldn't get anywhere near that with the four blade 17 pitch. I was about 700 RPM under maximum topping out at about 36 mph and tweaking the trim... I was hoping dropping to a 15 Wood get me back up to wide open throttle right at the top of my RPM range. My RPM range maxed out at 29 mph with a 15 pitch... way too slow for a good slalom ski. had to return both.
Scritto da: Anthony R. Johnson
Plug and Play
I wasn't sure what the big deal was until I installed it on the boat. My boat gets onto plane almost instantly and for cruising you can keep the rpm's down. Not sure about the gas savings yet but I'm sure it's doing better as I don't have to peg the throttle anymore. So far I love this prop.
Scritto da: Adam Robinson
Drag
Great product but not for my boat
Scritto da: Heidi Osborn
As advertised
Everything stated in the description of this prop is accurate. I am completely satisfied with this prop. My only complaint would be that my boat pulled to the right. However this was a simple fix with the trim tab on my out drive. Improved hole shot, plane out time at much slower speed , turning and backing. The slow speed maneuverability has improved as well. I Would recommend to anyone who is looking for an improvement in these areas. I did however loose a few MPH of top end. But with a 2.3 OMC cobra I’m not surprised and it’s no big deal for me. I’m more of a cruiser than a speed junky. Definitely a strong step up from a three blade with the same pitch and diameter.
Scritto da: Huckster79
Buy it! Quit looking at other props!
Awesome prop, amazing performance!!!!!! Hole shot is now insane, no time to plane- by time I have the throttle buried we are on plane even with a full boat. My old 3blade prop ventilated if I wasn't careful even on normal turns- I can now turn sharp with little problem and even if I downturn too sharp and it starts to ventilate it seems to catch water again before I can back off the throttle. Noticeable difference in the metal-I wondered if "forced casting" was just marketing spin but wen I hit my old prop w my finger I get a thud. Went I flick this one it rings like a bell. I would definitely recommend! Besides being 1/5 of the cost of stainless you aren't putting your lower unit at risk. I did loose about 1mph top end but the take off and no ventilation is definitely worth 1mph especially if you are using it for water sports. Shipping was insanely fast
Scritto da: KGB
4 Blade prop
1st pop on my boat is a 3 blade hustler great performance and still going strong after over 10yrs. Wanted to give the 4 blade design a try and keep my 3 blade as a back up. Out with back surgery, but will update the performance once I get on the water. I have no doubt it is going to work like a champ.
Scritto da: clubberL87
Noticeable difference
17.5 ft Alumacraft 115 Yamaha 4 stroke, much improved on plane and improved turning.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array