uxcell K тип 5 см дълга сонда термодвойка сензор или температурен контролер

Name: uxcell K тип 5 см дълга сонда термодвойка сензор или температурен контролер
Brand: uxcell
SKU: 0608641528022
Price: 56.61 EUR
Availability: InStock

Brand:uxcell

3.3/5

lv
56.61

Проектиран с вилица, гъвкавата пружинна секция може лесно да се огъне за специална употреба. Работи добре с терморегулатор, включен тук), широк диапазон на измерване от 0-400 градуса по Целзий. .

Количество

Добави в кошницата Купи сега

EAN: 0608641528022

Категории Промишлени и научни разработки, Тест, Измерване и инспектиране, Температура и влажност, Температурни сонди и сензори,

Тегло: 31 g; Съдържание на пакета: 1 x Термодвойка тип K. Разстояние между клемите на вилицата: 4,1 мм / 0,16; Цвят: сребрист тон. Вътрешна изолация: Фибростъкло; Външно екраниране: Метален екран; Обща дължина: 1M / 39. Диаметър на сондата: 5 mm / 0,2; Дължина на сондата: 5 cm / 2 (не е включена гъвкава секция); Диаметър на резбата: 7,6 mm / 0,3. Име на продукта: Термодвойка; Тип: Тип K; Температурен диапазон: 0-400C(32-752F).

Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	a12031600UX0143
Manufacturer	Dragonmarts - BISS
Product Dimensions	39.37 x 0.3 x 0.3 inches; 0.01 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с^*

Вашата оценка

Scritto da: Rob

Works, but low quality

This thermocouple probe seems to work ok in my application, but I had to isolate it from the metal chassis of my oven in order to get a decent reading. Even still, the probe is nowhere near as good as those from more reputable sources (Omega, Cole-Parmer, etc). The insulation colors are not the standard for type K thermocouples (yellow + and red -), but trial and error revealed the correct configuration (blue + and red -). In the future, I would order a more expensive but higher quality probe from Omega or similar suppliers.

Scritto da: Amazon Customer

Gives good readings via the thermometer module I have it connected ...

Mounted into the main cook chamber of my keg-a-Que (smoker/BBQ combo made from commercial beer kegs). Gives good readings via the thermometer module I have it connected to (battery powered).

Scritto da: Scucc07

Good quality

Used in a powder coating oven with a temp controller and works great and is very accurate. Have had it in use now for over a year with moderate use and has yet to have a problem

Scritto da: Amazon Customer

Nice probe, double check your probe specs.

Nice probe, but did not work with my InkBird control unit, which is my fault. Double check your temperature probe requirements.

Scritto da: Bestrya

Worked great with a MAX31855 in an Arduino project

Worked great with a MAX31855 in an Arduino project. Unfortunately, I could not use this probe for my project as this probe is "grounded", giving erratic temperature readings when the probe touched metal. This is not the fault of the product, but my own for not realizing what type of probe I needed. This product seems to be high quality and would last a long time.

Scritto da: Skuyler Farha

I ended up changes the connections to have probes connect ...

I ended up changes the connections to have probes connect to my multimeter. They ohm out at 9 ohms which my fluke stock test probe ohms at 3 ohms. Gets to the same temp as stock only slower.

Scritto da: doug starkey

Four Stars

works as advertised i will be ordering more of these as needed.

Scritto da: Tyson and Lindsey

Four Stars

Easy to use when hooked up to a MAX31855 IC