Stanley 25-1204 Маркуч за мокро сухо прахосмукачка 1-1/4 инча, 5 фута, подходящ за прахосмукачки от магазин от 2,5-5 галона, съвместим със Stanley SL18130P, SL18129

Brand:Stanley

3.3/5

lv
95.41

Гъвкав маркуч Stanley с дължина 5 фута, подходящ за вакуум от 2,5-5 галона. (1 маркуч на опаковка). работата е по-лесна, когато имате правилните инструменти. Независимо дали почиствате с прахосмукачка вашия гараж, работилница или подове на закрито, събирате течности, почиствате колата си или почиствате на открито, има аксесоар Stanley, за да направите почистването по-лесно, по-бързо и по-ефективно. Аксесоарите са взаимозаменяеми с други основни марки мокро или сухо вакуумно оборудване. Мокрите или сухи прахосмукачки Stanley осигуряват превъзходна производителност във всяка среда. Прахосмукачките Stanley правят кратка работа дори при най-трудните задачи, спестявайки ви време и усилия. Вакуум – име номер едно във вакуумната индустрия. ЗАБЕЛЕЖКА: Този вакуумен маркуч е подходящ само за модели на Stanley Vacuum, чиято дата на производство е преди 2015 г. 45-та седмица. На етикета на продукта има код за дата: 5452015. Списък на моделите на монтажа: SL18134PSL18135PSL18136SL18137SL18138PSL18138SL18128SL18128PSL18129SL18130SL18130P

КАКВО ПОЛУЧАВАТЕ: 1 бр. маркуч Stanley 25-1204. ПРИЛОЖЕНИЕ: Позволява ви да разширите обхвата на вашата прахосмукачка с дълъг и гъвкав вакуумен маркуч, който работи на мокро и сухо. ЛЕК И ИЗДРЪЖЛИВ: Изработен от висококачествен гъвкав материал с добра изработка, лек и не се чупи лесно, многократно използваем и здрав. ДИАМЕТЪР И ДЪЛЖИНА: Диаметърът на маркуча е 1-1/4 инча (32 mm); дължината е 5 фута (1,2 м). МОДЕЛ ЗА АДАПТАЦИЯ: маркуч Stanley 25-1204, подходящ за прахосмукачки за мокро/сухо почистване от 2,5-5 галона, съвместим с прахосмукачки за мокро/сухо почистване Stanley SL18130P, SL18129.
Batteries Required? ‎No
Brand Stanley
Certification ‎certified frustration-free
Color Black
Color ‎Black
Country of Origin ‎China
Customer Reviews 4.3 4.3 out of 5 stars 274 ratings 4.3 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Hose
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH 24 x 12 x 12 inches
Item model number ‎25-1204
Item Package Quantity ‎1
Item Weight 1 Pounds
Item Weight ‎1 pounds
Manufacturer ‎Alton Industries
Part Number ‎251204
Product Dimensions ‎24 x 12 x 12 inches

3.3

13 Review
5 Star
70
4 Star
9
3 Star
7
2 Star
4
1 Star
9

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Kindle Customer
Glad I was able to replace the hose instead of the entire unit !
This Stanley shop vac works really well, and glad Amazon had a replacement part for it
Scritto da: Adam Beeman
It works
I needed a hose, and this one works, but I’m not amazed with the quality. It’s also very stiff
Scritto da: Jose R.
Easy to use and conet
No video
Scritto da: jim courter
Perfect match for my vac.
Happy to find a replacement.
Scritto da: Prostreetr73
Worked perfect as needed
This hose worked perfect on my small shop vac
Scritto da: Booked4Life
Works fine with user modification for 2.8 Gallon Stanley Shop Vac
I bought this hose to replace the lost hose for my Stanley 2.8 HP shop vac. I would not have known, if I hadn't read the reviews before purchase, that the hose would fit if I cut off part of the end where it attaches (there is a kind of half-loop at the attachment point - I had to cut it off plus about an inch of the tubing at that point.) Once that was done, the hose fit my shop vac and worked just like the original. I deducted one star, because the need to cut off a bit of something before testing it could make it non-returnable - if it hadn't worked.
Scritto da: KEL
JUST WHAT I WANTED
perfect fit
Scritto da: mike ellicott
This hose like the one it replaced suffers from a poor design ...
hose is not entirely correct for my vacuum, which IS the listed vacuum , on my particular unit the hooked end of the hose (the deflector after the threaded fitting to attach it to the vacuum) is actually attached to the inside of the attached screw juncture on the vacuum with the hooked deflector part of the intake port to the vacuum itself. In order to make this replacement fit I had to take a hacksaw to it and cut off the deflector and about 1/2' of the hard plastic hose behind it in order to actually attach it to the vacuum. This hose like the one it replaced suffers from a poor design on the business end also and the hard plastic tube is likely to pull out of the flex hose during routine use. Duct tape will solve that but it shouldn't be necessary
Scritto da: CAMMO
SLight adjustment & it fit my older Stanley Shop Vac
I lost my old vac tube ages ago, so it was to finally find a replacement. I had to hack saw the curved end off as my older model already had the curved diverter riveted to its inside.
Scritto da: Rob M
Photo doesn't match product
I needed a new hose with the attachment at the end that looks like a letter "c" or "u" as in the photo so that debris is blown down into the vacuum bag. That's not what I got. Probably not Amazon's fault. It's Stanley that seems to work hard to make their accessories both impossible to find and prohibitively expensive.
Scritto da: JER_83
Great product
I looked all over the place for a replacement, it is a perfect fit and it saved me from having to trash my vacuum
Scritto da: Patrick Reid
Stanley vacuum hose
It is not the same as the original, which had a curve that turned downward into the bag.
Scritto da: Doreen McCaskill
Repacement Hose
Fits our small Stanley vacuum perfectly.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array