POWERTEC 70228 2-1/2 инча Y-образен съединител за маркуч за събиране на прах, прозрачен цвят

Brand:POWERTEC

3.6/5

lv
76.41

Представяме ви 2-1/2-инчов прозрачен Y-образен съединител за маркуч за събиране на прах от POWERTEC. Бързо и лесно разширете мрежата от маркучи на вашия прахоуловител, за да посрещнете по-ефективно нуждите на вашата работилница. Този удобен фитинг ви позволява да свържете две отделни машини директно към главния маркуч на прахоуловителя за оптимална гъвкавост. Висококачествена прозрачна пластмасова конструкция за лесно гледане Няма повече да гадаете какво се случва във вашата система за събиране на прах с тези прозрачни Y-образни фитинги вие ще знаете точно какво се случва по всяко време. Гъвкав дизайн Независимо дали разделяте маркуч за чифт шлайфмашини или свързвате вашата рутерна маса към магазинна прахосмукачка – приложенията са безкрайни. Най-важното е, че ще откриете, че този 2-1/2 инчов конектор за маркуч за прахоуловител е ценен актив за поддържане на вашата работилница чиста и чиста от прах. Премиум конструкция Изработен от първокласна, издръжлива, прозрачна ABS пластмаса, този конектор за маркуч е здрав , изключително издръжлив и способен да издържи на износването, обикновено свързано с абразивна и голяма употреба. Съвместим размер Всички три номинални края на фитинга 2-1/2 инча OD y са леко по-малки, за да се поберат във вашия маркуч за прах 2-1/2” ID или порт. Няма да се свързва директно с други 2-1/2” OD портове. Външен диаметър: 2-31/64”

РАЗМЕРИ: И трите 2-1/2 инча номинален край измерват 2-31/64 инча OD и 2-7/32 инча ID
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Color Clear
Color ‎Clear
Country of Origin ‎Taiwan
Customer Reviews 4.5 4.5 out of 5 stars 343 ratings 4.5 out of 5 stars
Included Components ‎2-1/2” Y-Fitting
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 6.5 x 2.5 x 5.75 inches
Item model number ‎70228
Item Package Quantity ‎1
Item Weight ‎5 ounces
Manufacturer ‎POWERTEC
Material Acrylonitrile Butadiene Styrene
Material ‎Acrylonitrile Butadiene Styrene
Nominal Wall Thickness 0.125 inch
Part Number ‎70228
Product Dimensions ‎6.5 x 2.5 x 5.75 inches
Size ‎2-1/2 inch

3.6

9 Review
5 Star
70
4 Star
19
3 Star
7
2 Star
2
1 Star
3

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Patrick
Be sure to install in proper direction.
Well made , sturdy plastic material. Important to orientate in the proper direction to ensure good vacuum flow. I'd recommend this and purchase again.
Scritto da: Face0525
Worked Great
Used it on my 2.5 inch hoses for My shop vacuum
Scritto da: Kimnicha N.
Excellent Y fitting
This is exactly what I was looking to split my dust collection system. Very Very durable.
Scritto da: Doggie Bear
Perfect for Dewalt DWE7491
Perfect for the Dewalt DWE7491. Split the dust collection hose into top and bottom: one for the blade guard and one for the blade. You'll need a reducer for blade guard.
Scritto da: HKD
Worked great on for SawStop dust collection w/2-1/2" shop vac (with small mods)
I prefer to use my portable table saw outside, but sometimes the weather doesn't agree. With this fitting I was able to construct a fairly effective dust collection system with my RIDGID WD1450 shop vac. The Y fitting (2nd picture) gave me noticeably better suction than just teeing into a 2-1/2" vacuum line by cutting into it (1st picture), which I did until this fitting arrived. To get my shop-vac hose to fit snugly, I used some foil tape on the inside of the fitting to "build up" the inside diameter a bit. Had to do the same with the 1-1/4" fitting on my SawStop's guard (used duct tape there, no discernible difference in collection). Highly recommend POWERTEC's thumb-turn hose clamps as well.
Scritto da: Tom F.
Good fit and clear to see inside
Fitting is clear so you can easily see if there is a clog inside. It is a perfect fit for 2.5" hose. Good product.
Scritto da: Bill Patzold
Very useful
Nice way to split vacuum hose for 'twin ports
Scritto da: Bingo
Love ‘em! You gotta get this one!
Love the clarity factor and it slides right in my 2 1/2 clear hose. Got em all right here on Amazon where you get the best stuff at the best price.
Scritto da: Patrick
Didn't fit.
The 2.5 inches stated didn't match. Slightly off, didn't suit my needs.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array