POWERTEC 70221 PVC маркуч за събиране на прах (6 инча x 10 фута)

Brand:POWERTEC

3.6/5

lv
263.89

6-инчов x 10-футов PVC маркуч за събиране на прах - POWERTEC 70221 Практичен, безопасен и рентабилен маркуч за събиране на прах, предназначен да подобри вашите съществуващи системи за събиране и филтриране на прах в работилницата. Гъвкава гъвкавост Независимо дали имате промишлена прахосмукачка или централизирана система за събиране на прах, вградена във вашия магазин, вие разбирате важността да имате супер лек, гъвкав и устойчив на прегъване маркуч за събиране на прах, който може да издържи на тежките условия на ежедневната употреба в магазина. Устойчив на работа Изработен от висококачествен PVC материал, този маркуч няма да се срути под натиск от вашия прахоуловител. Издръжливостта, здравината и лесният монтаж на PVC го правят идеален за контрол на праха в работилницата, събиране на дървени стърготини, дърводелски и дървообработващи приложения. Иновативни дизайнерски характеристики Изтъква впечатляващо полупрозрачно тяло, подсилено от вътрешна спирална пружинна стоманена тел, която ви позволява да наблюдавате ефективността на движението на въздуха, събирането на отпадъци и отделянето/филтрирането на финия прах. Оценено като безопасно При събирането на прах винаги трябва да се вземат предвид опасностите от статично електричество и риск от пожар. Този PVC маркуч има конструкция със забавяне на горенето, устойчив е на температура (до 176° F) и е способен на електростатичен разряд (когато е заземен). Освен това предлага изключителна устойчивост на химикали, както и на киселинни и алкални материали. Данни за спецификацията на продукта Конструкция: Тежкотоварен мек PVC (поливинилхлорид) подсилена спирална стоманена тел от пружинна стомана: Тел от пружинна стомана Размер: 6 инча диаметър x 10 фута дължина Дебелина на стената: 0,5 mm / 1/64 Съотношение на компресия: 3: 1 Температурен диапазон : -50° F до 158° F (краткосрочно до 176° F)

Идеален за асортимент от колектори за дървени стърготини, вътрешни вентилационни канали за климатизация и 6” PVC системи за събиране на прах за приложения в дървообработването. Перфектен за всяка система за събиране на прах с ясна видимост – позволява ви да наблюдавате отделянето на прах/отломки и филтрирането на пара/дим. Изключително гъвкав маркуч, подсилен с пружинна стоманена тел, осигурява издръжливост и маневреност. Изработен от висококачествен PVC за издръжливост, здравина и лесен монтаж. Включва (един) прозрачен гъвкав маркуч с лява спирала с диаметър 6 и дължина 10 фута.
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Color translucent
Color ‎translucent
Country of Origin ‎Taiwan
Customer Reviews 4.6 4.6 out of 5 stars 414 ratings 4.6 out of 5 stars
Included Components ‎Hose
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 7 x 7 x 32 inches
Item model number ‎70221
Item Package Quantity ‎1
Item Weight ‎7.17 pounds
Manufacturer ‎POWERTEC
Material PVC
Material ‎PVC
Measurement System ‎English/Standard
Nominal Wall Thickness 5 month
Part Number ‎70221
Pattern ‎Hose
Product Dimensions ‎7 x 7 x 32 inches
Size ‎6 Inch
Style ‎PVC Hose 6" x 10 feet

3.6

13 Review
5 Star
74
4 Star
16
3 Star
4
2 Star
2
1 Star
3

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Tim Douglass
Tuff enough
I purchased this hose to extend my dust collector on my industrial blast cabinet. It works great and it’s lightweight. I was worried how it would hold up but it’s been in service 8 hours a day for the last 2 weeks with no problems. This is a great buy
Scritto da: Don S.
Good quality, heavy duty plastic
Fits over 6" duct perfectly. Does not kink, heavy duty so stepping on it (I did) or dropping wood on it (did that too) does not damage it.
Scritto da: DON
Good product
Is what it says. Works like it should. Good purchase.
Scritto da: captain hook
very nice for the price
I was expecting some very cheap tubing for the price but its actually very nice. unfortunately its just not tough enough for my yard vack as a few sticks did put holes in it. for any lighter duty application i would definitely buy again!
Scritto da: otddave
Great Replacement for Agri-Fab Leaf Vac
I got the 6" by 10' size to replace the OEM hose on the Agri-Fab leaf Vac that had only lasted for four days. I was a little concerned when it came in a box that was less than 3' long. However it stretched to reach my 8' ceiling on its own weight. I used the entire length to replace the OEM piece which was only 7'. This hose has spring steel coils and retracts more than the OEM piece under suction so I did not have any issues with it dragging on the ground and it stretched much better on tight left turns. I did some of this on 20 degree F days and the cold temperature did not seem to reduce the flexibility. After five days of use it seems to be in excellent condition.
Scritto da: AKFred
It's a hose!!!
I used this between my Thien baffle and dust collector. Since it is 10' long I have that little extra distance I may need for dust collection. Both my baffle and dust collector are on wheels, so this hose make it easier to maneuver everything around. Pros: It is flexible It makes for easy connection to dust collection system Material is thick Cons: Not easy to find good clamps. Not really a con on this item though.
Scritto da: Brian J Padovini
Perfect for shop dust collection
This hose fit perfectly on all my 6” dust collection connections. I used it to transition from all my 6” drops, to my individual tools. Fits the Clearview PVC hose adapters.
Scritto da: brandon
Durable
Using for Leaf vac machine. Works great very durable. Been dragging this hose around yards across rocks, dirt sticks, blacktop, you name it, it hold up! Definitely would purchase again. FULLY EXTENDED AND WRAP WITH GORILLA TAPE FOR EXTRA LIFE, 2ND PURCHASE NOW
Scritto da: El kratos Ω
Lo utilizo para extracción de un aire acondicionado portátil
Después de sufrir con mi aire acondicionado portatil con su manguera de extracción de metro y medio, decidí buscar alternativas para poderlo mover con mayor facilidad, encontré esta manguera y al parecer ha funcionado muy bien, sólo que no fue de 6 pulgadas de diámetro, es mayor por lo que tuve algunos problemas para su instalación pero una vez conectado ha funcionado muy bien y puedo mover mi aire por toda la habitación sin que se caliente demasiado el aparato. Esperemos soporte la extracción de aire caliente por mucho tiempo porque en ocasiones si percibo que se calienta demasiado la manguera.
Scritto da: Richard L
Light duty, bad design
Thin PVC makes it light duty. The way it is designed places the spring wire inside the hose (higher friction). Much better hose available for the same price.
Scritto da: Dale Ryan Leckie
It’s fine. Not super firm. No good for 90 degrees.
I tried to run this around a bend. It’s didn’t collapse exactly, but it bent in a very strange way that restricted air flow. I was expecting this to be a tough as most of the 4” hose I have, but it’s much softer. That may be a good thing for some people.
Scritto da: Michael
Incredibly hard to adjust and get into place. Costly in Comparison to alternatives.
Incredibly hard to adjust and get into place. Costly in Comparison to alternatives. Didn't seem to thread well into the Window Attachment, but was fine, into the machine.
Scritto da: Benjamin G.
Work as intended
Work as intended

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array