POWERTEC 70140 Редуктор за маркуч от 2-1/2” до 1-1/4” – Модул за преобразуване на аксесоари за събиране на прах 1 опаковка

Brand:POWERTEC

3.4/5

lv
54.54

Представяме Ви редуктора за маркуч от 2,5” до 1,25” от POWERTEC. Този адаптер служи като преобразувател за вашите аксесоари и приставки за събиране на прах. Проектиран както за професионалисти, така и за ентусиасти „Направи си сам“, сега можете да използвате своя 2,5-инчов ID маркуч за събиране на прах с всичките си инструменти и аксесоари за прахосмукачка за мокро/сухо 1-1/4” ID. Идеален е за всяка работилница, която иска да увеличи работния процес, като елиминира нуждата за допълнителни инструменти. Повечето стандартни конектори за маркуч 2-1/4” OD ще се поберат в 2-7/32” ID. Премиум конструкция Редукторът POWERTEC е изработен от висококачествена ABS пластмаса. Този лек материал е широко известен със своята превъзходна издръжливост и устойчивост на абразия – и двете качества са перфектни за всяка дървообработваща среда и/или работилница, която зависи от високоефективното прахоулавяне. Размери на адаптера за редуктор 2-1/2-инчови номинални крайни мерки 2-29/64-инчови (2,45-инчови) външен диаметър. и 2-7/32-инча (2,28-инча) I.D. 1-1/4-инча номинални крайни мерки 1-3/16-инча (1,19-инча) O.D. и 1-1/64-инча (1,02-инча) I.D. * Моля, проверете спецификациите за размера на вашия инструмент. POWERTEC е водещ производител на висококачествени дървообработващи инструменти и аксесоари, машини и асортимент от OEM резервни части. Ние се ангажираме да надхвърлим очакванията, като същевременно внасяме най-новите иновации, технологии и продуктови разработки в индустрията.

Няма налични единици
1-1/4-инча номинални крайни мерки 1-3/16-инча (1,19-инча) O.D. и 1-1/64-инча (1,02-инча) I.D. 2-1/2-инчови номинални крайни мерки 2-29/64-инча (2,45-инча) O.D. и 2-7/32-инча (2,28-инча) I.D. Адаптивен към Shop-Vac, Sears и различни други мокри/сухи вакуумни маркучи, които имат номинален 2-1/4-инчов OD край на маркуча. Здрав, издръжлив ABS пластмасов материал. Свържете 1-1/4-инчов аксесоар към 2-1/2-инчов ID гъвкав маркуч за събиране на прах. СПЕЦИФИКАЦИИ: 2-1/2-инчови номинални крайни мерки 2-29/64-инча (2,45-инча) O.D. и 2-7/32-инча (2,28-инча) I.D.
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Color Black
Color ‎Black
Customer Reviews 4.4 4.4 out of 5 stars 739 ratings 4.4 out of 5 stars
Included Components ‎2-1/2” to 1-1/4” Hose Reducer
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 2 x 2 x 3 inches
Item model number ‎70140
Item Package Quantity ‎1
Item Weight 0.02 Pounds
Item Weight ‎0.32 ounces
Manufacturer ‎Southern Technology LLC
Material Plastic
Material ‎Plastic
Part Number ‎70140
Product Dimensions ‎2 x 2 x 3 inches
Style ‎1 Pack

3.4

13 Review
5 Star
66
4 Star
17
3 Star
10
2 Star
2
1 Star
5

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Luis
Great Hose Reducer
Does the job and so far seems durable.
Scritto da: guitarsmokey123
What can I say
Just what I needed to fit this bigger size (1/2) filter for my shop vac.
Scritto da: Keith
It sucks!
It sucks, like it’s supposed to! Used it on my mitre saw output. Only negative is that the reduction in size leads to an awful squealing noise when the hose slips out of the saw output. Otherwise, it does the job!
Scritto da: FM
Good suction power
Great value
Scritto da: kansas consumer
Buy something else
I needed a reducer attachment and chose this. I would not recommend this item. It just simply doesn't easily attach to any of my shop vacs. I have three vacuums. Buy something else. Too rigid and awkward.
Scritto da: Beverley A. Thomas
It fits!
I purchased this adapter to connect my Porter Cable RO Sander to my Shopvac so than I can sand indoors instead of being at the mercy of the weather outdoors. It's a nice snug fit.
Scritto da: Yi Mei
Doesn't fit snuggly over craftsman shopvac
Doesn't fit snuggly over craftsman shopvac. Loose fitting
Scritto da: john a burg
A brittle type plastic.
I needed a softer type adapter for my shop vac's flex hose, old one cracked from inserting flex hose in. This one is very similar to my old duct taped adapter. Probably not the best for the every day use.
Scritto da: Chappers
As billed, but expensive for what it is
Paid about £7, worth about £1.50
Scritto da: Serg
Perfect fit
The reducer worked perfectly to connect the DeWALT DWE6401DS sander to the RIDGID NXT 45L shop vacuum. The external diameter on the vac hose is 2 1/4 inches, and the external diameter of of the port on the tool is 1 inch.
Scritto da: Lynette d.
Measurements in the image is not correct.
I bought this as per the image dimensions, hoping that it would fit onto the 2-1/2" hose outlet on my machines. The image suggests that the inner diameter on the was slightly larger than 2-1/2" and tapper so I was hoping that it will not only fit onto the plastic outlet on the machines but would be a snug fit. It is the same size as the plastic outlet. I am not using masking tape :( but will have to buy a rubber sleeve to connect these. Quite disappointed as I chose this purely based on the dimensions.
Scritto da: chet
Adapter
I have tried to match a 11/4” adapter to one that a 11/4 vacaum hosewould fit and once again this adapter will not take that hose so be very sure of what you order or you’ll be chasing non-fitting adapters for ever
Scritto da: Marc
Bon produit, dimension mal indiquée
La vrai dimension est 2 1/2 po extérieur au bout de l'adapteur et 1 1/4 seulement au bout de embout

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array