OEMTOOLS 24235 Инструмент за монтаж на шпилки за камиони, намалява триенето при монтиране на шпилки на гуми с инструмент, за тежка употреба с ударен гаечен ключ или камиони с тресчотка

Name: OEMTOOLS 24235 Инструмент за монтаж на шпилки за камиони, намалява триенето при монтиране на шпилки на гуми с инструмент, за тежка употреба с ударен гаечен ключ или камиони с тресчотка
Brand: ‎OEMTOOLS
SKU: 0076812242358
Price: 126.32 EUR
Availability: InStock

Brand:‎OEMTOOLS

3.5/5

lv
126.32

Висококачествена съвместимост: Работи с вашата стандартна тресчотка или ударен гаечен ключ; Пасва на шпилки до 22 милиметра или 7/8 инча. Издръжлив и здрав: широката носеща повърхност на този инструмент за монтаж на болтове на колела разпределя натоварването, за да предотврати повреда и да удължи живота на инструмента за шпилки на колела. Защитна операция: Лагерът намалява триенето; Монтирайте нови шипове за гуми, без да се притеснявате, че ще повредите резбата на шиповете си. Специализиран за камиони: Предназначен за болтове на колела с диаметър до 7/8 инча; Снабден с тежък аксиален лагер за лесно издърпване на новата шпилка на главината на колелото на място. Усилен инструмент за монтаж на шпилки: Този инструмент за монтаж на шпилки предотвратява повреда на шпилките и гайките на колелата, като намалява триенето по време на монтажа.

Количество

Добави в кошницата Купи сега

EAN: 0076812242358

Категории Автомобили, Гуми и джанти, Принадлежности и части, Принадлежности и части за колела, Шпилки за колела,

Brand	‎OEMTOOLS
Customer Reviews	4.5 4.5 out of 5 stars 344 ratings 4.5 out of 5 stars
Exterior	‎Chrome
Is Discontinued By Manufacturer	‎No
Item model number	‎24235
Item Weight	‎4 ounces
Manufacturer	‎OEMTOOLS
Manufacturer Part Number	‎24235
Model	‎OEMTOOLS 24235 Truck Stud Installer
OEM Part Number	‎24235
Product Dimensions	‎4.8 x 3.1 x 0.7 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с^*

Вашата оценка

Scritto da: Amazon Customer

Simple

This tool made installation very simple and took longer to take brakes off

Scritto da: eduardo castellanos

Great quality

Anything oemtools that I have bought has always been good!

Scritto da: TractorMan92

Absolutely Amazing; Fast, Smooth and Simple~~~ !!!

Bought this stud installer on a whim since in the past I had just used a nut/washer combination to pull new studs into place. This installer had a roller bearing surface that allows the nut to spin as it tightens with no side load on the stud. It pulled the stud into place in less than 15 seconds using a regular 1/2" drive ratchet to turn the lugnut. Worked so well, I am looking for another project to use it on. The last one was to replace three cross-threaded 2014 Accord rear studs that a local tire ship screwed up and then tried to blame my SIL. Tire had never been off and the lugs were pristine before the new tires were installed. Made the repair a simple one. I removed and replaced three banged up studs (and new lug nuts needed too) in less than 20 min. Nice....

Scritto da: Nigel Franceschi Agosto

Perfect and very useful.

Perfect and very useful. Highly recommended, shipping was super fast.

Scritto da: Rogue 1 2016

Can't review this item, This item was returned as it didn't fit

Can't review this item, This item was returned as it didn't fit

Scritto da: Kurt K.

Did the job but…

It did what it claimed, but it messed up the lug not a little, nothing a file and some patients didn’t resolve, but I recommend getting an extra nut so you can use that just for the install.

Scritto da: Jeff Gerber

Make sure you know how close the studs are to the hub before purchasing.

I am only giving this 4 stars instead of 5 because it was too big to work on my dodge dakota truck even though in the description is says its for a truck. I should have measured how close the studs were to the hub before purchasing so I put some of the blame on myself. Because the studs are so close to my hub, it was pulling the new studs i was installing in crooked and rendering it useless for me to use. Make sure you know how close your studs are to the hub before purchasing. If you don't, you could end up buying something that won't work for your vehicle like I did. However, I used this on my friends ram 2500 and it worked perfectly.

Scritto da: Elroy

Works great!

The bearing inside the tool makes it easier to install wheel studs on trucks

Scritto da: Andrey Dolgirev

It works very good

It works very good

Scritto da: Eric Hentzelt

a good tool that is a great idea

the tool works great, if it fits on the hub of your wheels. Make sure there is enough room between the studs your installing and the raised hub center cap.

Scritto da: Nicolas

Missing part

I ordered the set for car AND truck. I received only one of them

Scritto da: Stephen

Pretty high quality

Quality feels strong enough to last a while Easy to install studs with this

Scritto da: t m

Good tool and price

Good tool for the price