Motor Guard M-45-KIT 1/4 NPT Комплект филтър за чист въздух

Name: Motor Guard M-45-KIT 1/4 NPT Комплект филтър за чист въздух
Brand: Motor Guard
SKU: 012301866155
Price: 312.74 EUR
Availability: InStock

Brand:Motor Guard

3.7/5

lv
312.74

Sub-Micronic филтрите за сгъстен въздух Motor Guard са най-добрата защита срещу увреждащ, мръсен въздух. Проектирани за инсталиране на мястото на употреба, тези филтри отстраняват частици, кондензирана влага и маслени аерозоли до невероятния размер от 0,01 микрона. Никой друг филтър на пазара не осигурява това ниво на защита, съчетано с нисък спад на налягането и лесна употреба. Произведен от неизбелена, рециклирана целулоза, навитият елемент във филтъра Motor Guard улавя замърсители и абсорбира големи количества влага и масло. Продуктът разполага с монтажна скоба и хардуер за използване с маркуч 1/4 инча. Това устройство ще се монтира в кабини за пръскане, на плазмени резачки или на друго оборудване, изискващо ултра-чист въздух и гъвкава връзка.

Количество

Добави в кошницата Купи сега

EAN: 012301866155

Категории Автомобили, Сменни части, Филтри, Въздушни филтри и аксесоари, Въздушни филтри,

Произведено в САЩ. Навитият елемент във филтъра Motor Guard улавя замърсители и абсорбира големи количества влага и масло. Максималното налягане е 125 psi, температурният диапазон е 32-175 F, а заместващият елемент е m-723. Размерът на порта е 1/4 NPT, номиналният въздушен поток е 45 CFM, а степента на филтриране е 0,01 микрона. Съдържа филтър Motor Guard модел M-30, монтажна скоба, хардуер и 2 резервни елемента.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Motor Guard
Color	‎Factory
Customer Reviews	4.7 4.7 out of 5 stars 128 ratings 4.7 out of 5 stars
Included Components	‎Motor Guard - Clean Air Filter Kit 1/4 Npt
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	12 x 5.5 x 10.75 inches
Item model number	‎M-45-KIT
Item Package Quantity	‎1
Item Weight	‎1.53 pounds
Manufacturer	‎Motor Guard
Material	‎Paper
Part Number	‎M-45-KIT
Power Source	‎Hand Powered
Product Dimensions	‎12 x 5.5 x 10.75 inches
Product Grade	Replacement Part
Size	‎One Size

5 Star

4 Star

3 Star

2 Star

1 Star

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с^*

Вашата оценка

Scritto da: D. J. M.

Works Great!

This was LOADS better than the cheap HF "Magician" 2 stage coalescent/dessicant filter it replaced. With only a compressor, aftercooler, regularor, booth filter, and gun regulator, the Magician in the booth was choking my paint gun making me crank up the line pressure to account for the pressure loss and the gun still didn't meet expectations. I was worried it was the long hose length (100ft 3/8" hose) as my paint booth is far away from the 60 gal compressor. The M-30 opened it right back up, allowing much better fan and fluid output without cranking the initial pressure up beyond 60 psi. The gun now sprays as it should with clean air, and no water! The kit is very economical with 3 filters included. Hookup was super easy & quick (10 minutes) with the bracket. If you're a DIY garage painter, this is a must-have!

Scritto da: Pat

Works very well

Works great good product for the money would buy again would recommend

Scritto da: Ronald J. Zembron

Great product

I owned one of these back in the early 80's and was constantly kidded about using a toilet paper roll for a filter. But I was painting Show Corvettes and found it to work perfectly. It's been years since I restored a Vette but I needed to do some minor body work and paint repair to a used Suburban I bought and needed a good filter system to use fro painting the panels. This filter immediately came to mind so I did some surfing and found that they still make it and have improved it since my last purchase almost 40 years ago. They now supply a great filter to use inside the unit that works extremely well. They are readily available and reasonably priced. They also eliminate the possibility of deterioration of the toilet paper roll that was possible if you didn't change the roll frequently. I only use mine with a dedicated air supply line to the filter and also a dedicated airline to the paint gun to eliminate the possibility of contamination when using air tools with oil. When using the air tools I remove the filter from the airline system by bypassing the filter and connecting my compressor after the filter system. I then connect to a oiler and dryer filter designed for such use with tools and separate air lines.

Scritto da: lr

FILTER

GREAT

Scritto da: cu

The Best Water / Moisture Trap .

I was having moisture in the compressor airline, entering my paint gun and ruining my paint job. I tried the so-called high-quality in-line water traps, but they all failed. As a true hero Motor Guard M-45-KIT 1/4 NPT Clean Air Filter Kit, solved this moisture problem. The result is clean dry air for spray painting. I have a plasma cutter so this kit will be ideal for dry h.p. air.

Scritto da: Mike Metzelfeld

Great air filter

I use this to filter air right before it enters my plasma cutter. There is an air dryer and filter up stream, I use this as the last line of defense before the plasma. This filter is a must have if you run a plasma cutter.

Scritto da: robert L

Air filter

Need to change the filter more often.

Scritto da: colormack

Great deal

Best price anywhere for a very simple but awesome air compressor filter

Scritto da: srblanch

Sturdy construction, efficient.

Sturdy construction, works great.