MICROJIG GRR-RIPPER GRAK-404 Комплект за надграждане за Gr-100 Pushblock, жълт

Brand:MICRO JIG

3.7/5

lv
117.10

Надстройте своя GRR-RIPPER до GRR-RIPPER Advanced! Получете несравнима прецизност, безопасност и контрол за дървообработващи проекти на вашия настолен трион; Разширете гъвкавостта на любимия си настолен трион и инструмент за безопасност в работилницата; Увеличете капацитета на захващане с 54%; Увеличете стабилизиращия капацитет с 250%; Правете сложни детайлни разфасовки за вашите най-прецизни проекти; Работете по-умно с GRR-RIPPER Upgrade Kit и надстройте своя GRR-RIPPER. Задължителен за всеки потребител на настолен трион. Комплект за надграждане за мощен, напълно регулируем блок за бутане с издръжлив екстремен захват; Комплектът за надстройка GRR-RIPPER включва (1) стабилизираща плоча, (1) регулируем дистанционер и монтажен хардуер; Стабилизиращата плоча осигурява 250% повече стабилизираща повърхност. Подобно на дъска от пера, тя държи дървото заключено към оградата за гладко рязане; практически елиминиране на свързването; Регулируемият разделител ви дава 54% повече площ за захващане за контролиране на по-голям материал. Напълно регулируем. Използвайте го като ръководство за маса за рутер за фрезоване с бик и елиминиране на снайпер от вашите пълнопрофилни срезове. Подходящ за всички модели GRR-RIPPER GR-100 за надграждане до GRR-RIPPER GR-200. Произведено в САЩ. Присъединете се към най-умните дърводелци в света. Работи с всички настолни триони, рутерни маси, фуги и лентови триони. Произведено в САЩ. 100% удовлетворение. 1-годишен производител. Лесен за използване и лесен за почистване! Посетете MICROJIG за сервиз. Работете по-безопасно. Работете по-умно. Добавете към количката си и направете поръчката си сега.

Монтажен хардуер. Регулируем дистанционер. Стабилизираща плоча. Този комплект включва. Най-сигурният и прецизен блок за натискане.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Yellow
Customer Reviews 4.7 4.7 out of 5 stars 549 ratings 4.7 out of 5 stars
Included Components
Item model number ‎GRAK-404
Item Package Quantity ‎1
Item Weight ‎2.45 ounces
Manufacturer ‎MICROJIG
Measurement System ‎Metric
Part Number ‎GRAK-404
Power Source ‎AC
Product Dimensions ‎8.75 x 1.5 x 5.75 inches
Warranty Description ‎Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only

3.7

13 Review
5 Star
81
4 Star
12
3 Star
5
2 Star
1
1 Star
1

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Kyle C.
Sturdy and safe!
I have been running a tablesaw for years for various woodworking projects and was just introduced to the GRR-Ripper a few months ago. I this extension improves the versatility and enhances safety when ripping cuts close to the fence. Highly recommend for beginners and experienced alike.
Scritto da: Bonnie Herdman
Safety
Should keep my husband from cutting his thumb on his table saw
Scritto da: Rockinindian
Micro jig
Eehhh, if your mass production on thin items running close proximity between fence and blade these are handy but $120 for this conntrapulas erector set which should come assembled I really don’t think a fairly seasoned wood worker needs it. I’ve made all my push handles and jigs before and for safety but I guess I just wanted a new expensive toy I didn’t need
Scritto da: Steve Ulrich
increased stabilizatoin
I like this add-on. It helps push the work against the fence. Easy to install and easy to set note when I set it I turn the work piece on its side and turn the fixture 90 degrees to the work surface. This is a procedure that is needed when doing long work pieces where the blade of the table is in the way.
Scritto da: TBerry
A "must have" foe the gripper
This adds so much more versatility to the gripper device. I wish I had just ordered it all together though. It's more expensive as an add on... even still, I wouldn't not have it. Highly recommended.
Scritto da: igsp
Nice addition to my Micro Jig GRAK-404 GRR-RIPPER
Few years ago I got standard edition of the Micro Jig GRAK-404 GRR-RIPPER thinking that this additional kit is unneeded luxury. Now, that I have it I see that I was wrong. It is one of those items that you not needed as often as standard Micro Jig RIPPER but when you need it - you need it. Safety first!
Scritto da: Terry McMillan
Improves Safety Features of GRR-Gripper
Same high quality components as the Gripper. Allows you to rip wider boards on the table saw while maintaining active control. I used the new Gripper features in this kit to act like a feather board while routing narrow stock on the router table and it resulted in more consistent and even shaping by allowing me to keep the material down on the table and up against the router fence from the beginning through to the end of the work piece. Love this whole concept and am saving for a 2nd Gripper and attachment set.
Scritto da: Roger Creasy
WHY I BOUGHT THE PRODUCE
Like the control of stock while using my table saw. Going to order one for my son-in-law. We are both DIY around home workshop builders.
Scritto da: Alan Dutton
Its made by Micro Jig
Overpriced, & expensive and considered how they are made (injection moulding) their profit margins must be super. So why buy then? Because it is Micro Jig - well designed, well made, ergonomically 'right', superb video's and literature and a joy to use. So I await my next purchase of further overpriced and expensive products from this excellent company. Recommended.
Scritto da: ken guy
Extra safety
Quick delivery and well made but it is after all a bit of plastic and rubber which makes it expensive for what it is.
Scritto da: Graham Kelshaw
safety
well made for woodwork safety
Scritto da: steve bonnie
product
well pleased
Scritto da: Ned Middleton
Never been so disappointed!
I recently took delivery of a 'GRR-Ripper Woodworking Pusher.' Great item for pushing lengths of wood through a table-saw. It is well made and thoroughly recommended - except for the simple fact that it arrived incomplete. This meant I had to purchase this 'Upgrade Kit' which arrived earlier today. Basically the kit completes the 'Pusher' by adding a 'Stabilising Plate' - for which there are 2 x long bolts, 2 white washers and 2 x screws. They all fit nicely, look strong and it's easy to see how they work. The second part is described as an 'Adjustable Spacer with Mounting Hardware.' EXCEPT for the simple fact the screws which are supposed to hold the item are the wrong size and do not fit the built-in screw holes. As I said, it only just arrived today - so I haven't dealt with the problem yet. What a shame I had to give two ONE STAR reviews to what really is a 5 Star product. Best wishes. NM

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array