LASCO 13-1304 Скоба за ремонт на тръби от неръждаема стомана от една част с един болт, 3-инча 3-инча x 1-инча 1 болт

Brand:LASCO

3.2/5

lv
77.66

ОПИСАНИЕ НА ПРОДУКТА LASCO 13-1304 Скоба за ремонт на тръби от неръждаема стомана от една част, единичен болт, 3-инчова дължина, 1-инчов размер на желязна тръба или 1 1/4-инчов L меден. Скоба за ремонт на тръби. 1-инчов размер на желязна тръба или 1-1/4-инчов L меден. 3-инчов дълъг. Една част скоба - един болт. Неръждаема стомана. LASCO, Lasso Supply Company Inc., Предпочитаната марка! Сервиз, избор и поддръжка! Larsen Supply Company е 3-то поколение, семейна собственост и управлявана повече от 80 години. Опаковката на LASCO включва полезни инструкции и свързана информация за елементите на проекта. LASCO има най-голямата водопроводна линия за търговия на дребно в индустрията днес с над 7000 пакетирани и 16 000 насипни SKU. Посетете нашия онлайн каталог на уеб сайта за един от най-пълните продуктови списъци в индустрията. ОТ ПРОИЗВОДИТЕЛЯ LASCO 13-1304 Скоба за ремонт на тръби от една част от неръждаема стомана, единичен болт, 3-инчова дължина, 1-инчов размер на желязна тръба или 1 1/4-инчов L меден. Скоба за ремонт на тръби. 1-инчов размер на желязна тръба или 1-1/4-инчов L меден. 3-инчов дълъг. Една част скоба - един болт. Неръждаема стомана. LASCO, Lasco Supply Company Inc, Предпочитаната марка! Сервиз, избор и поддръжка! Larsen Supply Company е 3-то поколение, семейна собственост и управлявана повече от 80 години. Опаковката на LASCO включва полезни инструкции и свързана информация за елементите на проекта. LASCO има най-голямата водопроводна линия за търговия на дребно в индустрията днес с над 7000 пакетирани и 16 000 насипни SKU. Посетете нашия онлайн каталог на уеб сайта за един от най-пълните продуктови списъци в индустрията.

Неръждаема стомана. Една част скоба - един болт. 3-инчов дълъг. 1-инчов размер на желязна тръба или 1-1/4-инчов L меден. Скоба за ремонт на тръби.
Batteries Required? ‎No
Brand LASCO
Country of Origin ‎China
Customer Reviews 4.2 4.2 out of 5 stars 367 ratings 4.2 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH 3 x 3 x 3 inches
Item model number ‎13-1304
Item Package Quantity ‎1
Item Weight 0.45 Pounds
Item Weight ‎7.2 ounces
Manufacturer ‎LASCO
Material Stainless Steel
Material ‎Stainless Steel
Measurement System ‎Inch
Number Of Pieces ‎1
Part Number ‎1
Product Dimensions ‎3 x 3 x 3 inches
Size ‎3-Inch x 1-Inch
Style 1 Bolt
Style ‎1 Bolt
Warranty Description ‎1 Year Warranty

3.2

10 Review
5 Star
61
4 Star
19
3 Star
7
2 Star
4
1 Star
9

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: 15ironross
has a rubber lining to help seal.
Had to modify bracket to make it work, had to grind a flat place for washer to sit, then worked well.
Scritto da: John
Good product and concept, but sizing is slightly off.
Good product and concept, but sizing is slightly off. Product says 1/2" ID Steel or 3/4" ID Copper. Had them on two separate copper pipes (3/4" ID), tightened all the way and both leaked. Had to cut some more dense rubber (same thickness as the one attached) and use it also. Still tightened almost all the way, but leaked stopped on both.
Scritto da: Team GeoSurf
Saved me from major repair
Used to stop a leak from an 1/8 inch hole. After attempting to epoxy (fail even after curing for 48+ hrs) and going without running water for 5 days I was super worried we'd have to bite the bullet and replace the 500 foot 70 year old galvanized water line to our house. Sanded the pipe down smooth and round with 80grit sand paper and clamped it down over. Not a leak, not even any dampness after several days. So happy and bought another to keep on hand for emergency.
Scritto da: Ronald B Kent
Returned
Returned
Scritto da: Victor H. Agresti
Not just for pipe repairs...
LASCO 13-1304 Stainless Steel One-Piece Pipe Repair Clamp Refer to the Customer image for the relative size of this 1" clamp, which is tightened all the way on a 1" copper pipe (1-1/8" outside diameter). It's too loose on that pipe. So..., this clamp should fit OK if your pipe or conduit is 1-3/16" to 1-3/8" (or more) outside diameter. The same relative sizes should work with all of these clamps, that is, add 3/16" to the clamp size for the minimum outside diameter pipe it will fit, and add 3/8" to the clamp size for the maximum OD it will fit – why they don’t say that in the description is a mystery. I used one of these to connect the two ends of a broken flexible electrical conduit, rather than spend hours rewiring and replacing the damaged section. The rigid conduit from the house is 1" outside diameter and the flexible conduit to its right is 3/4" OD, so a 3/4" clamp would have been a better fit. In any case, I built up the outside diameters to 1-3/16" with multiple layers of Gaffer's tape. Did the job. Some reviewers complain about the clamp’s blue color. The stainless steel part of these clamps are protected by the factory with a thin blue plastic that the customer peels off.
Scritto da: Les
It works
A few years ago I managed to get too close to my water well hydrant and put a nice gash in the pipe with my brush cutter. Not wanting to dig it up to replace it I relied on gorilla tape until I found this. Its been on a few years and has yet to leak a drop. Would totally use it again if I have another oops moment.
Scritto da: Cyndi M.
Great For Broken Backyard Umbrella
I live on a hill and get a lot of wind gusts that have ruined numerous umbrella frames. Instead of trashing them I gave this little gem a try based on a video I saw on YouTube. It works great to shore up the umbrella making it more like a market umbrella rather than one that tilts and breaks in the wind. Will definitely be buying more of these!
Scritto da: DASHLEY
Great for temp repair
Had a saddle valve fail on top of the water heater for the humidifier I don't use. Some leakage but had heard the leak so no bad damage. Pulled it out which of course left me with a small hole. After a couple sizing issues and days of turning the water on and off and cleaning up more water (tapes only work for low pressure lines), I got this one and in 30 seconds - fixed. I will have that section of pipe repaired because I found my main shut off valve doesn't hold back all the water so it's failing and will want that replaced with a ball valve - and it is no longer an emergency call. Thank you Lesco and Amazon for your patience in getting me the right size.
Scritto da: Winterpegger
Bigger than I needed
It's too bad they didn't have more size options. I got it for a 1-1/2" inner diameter copper drain pipe with a 4" long split (and some pieces missing) in it. I reckoned the 6 x 1-1/4 inch one would be too small, but this one is *way* too big to work w/o a lot of padding. I wound up using a couple layers of Flextape over the actual split, then a roll of rubbery shelf lining around that in order to provide enough volume for this to grab onto. But in that setup, the clamp itself and certainly not its gasket, or actually doing anything that, say, duct tape or even string would've done around that, so I haven't really put it to the test.
Scritto da: Shelley Buss
Rating
These are just products we need in our shop. Thank you.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array