Ingersoll-Rand 231HA 1/2 задвижващ пневматичен ударен ключ, Super Duty, 590 ft-lbs максимален въртящ момент, 8000 RPM, регулируем контрол на мощността, система за смазване под налягане

Name: Ingersoll-Rand 231HA 1/2 задвижващ пневматичен ударен ключ, Super Duty, 590 ft-lbs максимален въртящ момент, 8000 RPM, регулируем контрол на мощността, система за смазване под налягане
Brand: Ingersoll Rand
SKU: 0787721793809
Price: 459.03 EUR
Availability: InStock

Brand:Ingersoll Rand

3.4/5

lv
459.03

ОПИСАНИЕ НА ПРОДУКТА Ingersoll Rand 1/2 231HA е идеалният ударен гайковерт за всяка работа от поддръжка на съоръжения и индустриална работа до ремонт на превозни средства и работа с гуми. Здрав и издръжлив с мощен лопатков мотор, този инструмент няма да ви подведе. Характеристиките включват система за смазване под налягане, изпускателна тръба на дръжката, която насочва въздуха далеч от потребителя, регулируемо регулиране на мощността и контурна ръкохватка за комфорт и контрол на потребителя. Този модел е подкрепен от едногодишна ограничена гаранция. В продължение на повече от 100 години усъвършенстваните инженерни, производствени и сервизни модели на Ingersoll Rand определят стандарт за съвършенство. Доверете се на Ingersoll Rand, за да ви помогне да завършите работата си по-бързо и по-лесно от всякога. ОТ ПРОИЗВОДИТЕЛЯ 1/2-инчов ударен гайковерт Super Duty

Количество

Добави в кошницата Купи сега

EAN: 0787721793809

Категории Наръчни средства и домашно обзавеждане, Електрически и ръчни инструменти, Електроинструменти, Ударни гаечни ключове,

ИЗДЪЛЖИТЕЛНА НАДЕЖДНОСТ: Този пневматичен ударен гайковерт е достатъчно здрав, за да се справи с тежки условия, повтарящи се изпускания и излагане на химикали; Всеки компонент, механизъм и функция са преминали строги тестове, за да се гарантира дълготрайна работа. ХАРАКТЕРИСТИКИ: Система за смазване под налягане, регулируем регулатор на мощността и лесна за обслужване конструкция от две части допълват характеристиките на инструмента. КОМФОРТ ЗА ПОТРЕБИТЕЛЯ + КОНТРОЛ: Контурната дръжка осигурява комфорт и контрол на потребителя; Изпускателната тръба на дръжката насочва въздуха далеч от оператора. ПРИЛОЖЕНИЯ: IR 231HA е идеалният ударен гайковерт за всяка работа, за която се заемете, от поддръжка на съоръжения и индустриална работа до ремонт на превозни средства и работа с гуми. МОЩНО ИЗПЪЛНЕНИЕ: Здрав и издръжлив с мощен лопатков двигател, ударният гайковерт IR 231HA няма да ви разочарова; Има 1/2 инчово квадратно задвижване, свободна скорост от 8000 rpm и може да достигне до максимален въртящ момент от 590 ft/lbs.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Ingersoll Rand
Brand	‎Ingersoll Rand
Color	Factory
Color	‎Factory
Customer Reviews	4.4 4.4 out of 5 stars 126 ratings 4.4 out of 5 stars
Finish	‎Painted
Finish Type	‎Painted
Head Style	‎Round
Included Components	‎Manufactuered Brand Product
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	8.5 x 3.2 x 8.1 inches
Item Dimensions LxWxH	‎8.5 x 3.2 x 8.1 inches
Item model number	‎231HA
Item Package Quantity	‎1
Item Torque	‎590 Foot Pounds
Item Weight	5.8 Pounds
Item Weight	‎5.8 Pounds
Manufacturer	‎Ingersoll Rand
Material	Other
Material	‎Other
Measurement System	‎Inch
Operation Mode	‎Pneumatic
Part Number	‎231HA
Pattern	‎Wrench
Power Source	‎Hand Powered
Product Dimensions	‎8.5 x 3.2 x 8.1 inches
Size	‎One Size
Style	‎231HA - Std. 1/2" Impact
Thickness	‎1 Inches
Warranty Description	‎1 year from date of purchase with sales receipt or invoice

5 Star

4 Star

3 Star

2 Star

1 Star

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с^*

Вашата оценка

Scritto da: jlundin

Great impact

This impact has enough torque to get my lugs off my truck and remove rested nuts with ease. I recently completed a harmonic balancer replacement and it was only possible with this impact. Ingersoll-Rand and specifically the 231 has countless testimonials from people that have been using the impact for 20+ years. These impacts will last forever if taken care of properly and even if you neglect it people report of it working for decades still. All you have to do is oil daily before and after use and install a water/oil filter on your air hose line. Water from the compressor can accumulate and rust the impact if no filter is installed but again this will last for years and years without one. A lot of the new impacts are plastic and supply more torque. When advertised the composite plastic air impacts seem awesome. They usually promote the light weight high torque capacity. Well this 231 Ingresoll impact can handle any job I have thrown at it with ease. There are five setting and I have no issue with it ripping bolts off. A problem with the composite plastic is they do not last as long. Metal can outlast plastic any day obviously. As for the weight of a metal impact, it is not bad at all. The only time you will notice a difference is with prolong use. I would recommend this to anyone and the HA is a nice feature. HA stands for hand air which means the air output comes out from the bottom and not from the front. This directs the air away from your work area and prevents car dust and deposit from flying all over.

Scritto da: Tonto

imported

I was very disappointed that is was an import,, however it works just fine, this ingersol 231 ha replace my snap on gun. I have not had any trouble with this new gun, I even bought the red vinyl cover for it, I would recomend this as a good buy,, however since some 8 year old child put it together in china I would like to believe they could sell it for alot less money

Scritto da: ForeignerInPhils

Good torque, working well.

I'm using this to replace an AC Delco, which failed and had no spares service. Running on a 2HP compressor with pressure regulator set to 90psi, in my home garage. Good torque, hasn't failed me on any job yet. Torque/direction setting somewhat more fiddly than the AC Delco, but torque can be adjusted in both directions.

Scritto da: Amazon Customer

Communication - great, delivery speed - great

Communication - great, delivery speed - great. I tried to tight up & take out just one S=15/16 '' nut (diameter 5/8'' ) in my garage. ( I have had no time to work with it yet.) So, one nut - works perfect, like beast so far. The reason why I bought it - my old one exactly same model - I have been using 14 year, every single day , with no problems so far ! (I worked as a tire guy before and as a truck mechanic now). That is legendary reliability !

Scritto da: Michelle

Good putchase

Bought as a gift...person still uses it

Scritto da: Glenn Harris

getting the job done

it isn't the best one in the garage but it certainly isn't the worst. it is at least int he top 20% and the value if pretty good compared to others. Stay away from the Harbor Freight versions. With the IR you at least get and honest strength/torque rating. Like any tool of this nature or brand you just need to take care of it and it will likely take care of you. It has a nice ergonomic shape and is pretty heavy duty and durable and it will likely last for many years. after a lot of research it was a good value..

Scritto da: Laursaurus

Made in China which I try to avoid in tools ...

Made in China which I try to avoid in tools for reasons including prefer to support american workers. but seems well made and prefect for home mechanic and more. If you have the air power, this should work. Removed crank bolt no problem and suspension bolts.

Scritto da: jimmy

Works as described

So far so good ! Works better them my 30year old gun and is much quieter

Scritto da: Arron Smith

not impressed

great brand, but this just doesn't have the power and it's very heavy

Scritto da: Alain Massé

Just awesome. Should have bought this years ago!

This thing is awesome. I wish I had bought it years earlier. If you're considering it, do it. You will be happy. Yes, it's a bit loud, but it's a powerful impact driver, they make noise. Put on some protection for your eyes and ears.

Scritto da: Harold Hirst

Its an ingersoll... enough said.

Does exactly as they have done for years. This model (231ha) exhausts out the bottom of the handle producing 10 ft lbs less than a 231c model. So depending on what you want either of the above mentioned models are good.

Scritto da: Julio

Perfecta

Una marca muy buena para el trabajo pesado