HHIP 1011-3230 3/4-14 NPT HSS конусен тръбен метчик 3/4-14 високоскоростна стомана

Name: HHIP 1011-3230 3/4-14 NPT HSS конусен тръбен метчик 3/4-14 високоскоростна стомана
Brand: HHIP
SKU: 0076905300118
Price: 90.82 EUR
Availability: InStock

Brand:HHIP

3.6/5

lv
90.82

3/4-14 NPT конусен тръбен метчик от високоскоростна стомана ~ Заземяване на резбата. ~ Броят на жлебовете е 5. ~ Дължината на резбата е 1-3/8. ~ Общата дължина е 3-1/8. ~ Бързорежеща стомана. ~ Реже вътрешни резби в тръби. ~ Идеален за монтаж на тръби. ~ Заострени със скорост 3/4 на крак.

Количество

Добави в кошницата Купи сега

EAN: 0076905300118

Категории Промишлени и научни разработки, Инструменти за рязане, Капачки, Тръбни резбонарезни дискове,

Бързорежеща стомана; Thread Ground. Обща дължина 3-1/8. Дължина на резбата 1-3/8; Обща дължина 3-1/8. Размер 3/414; № на флейта 5.

Country of Origin	China
Item model number	1011-3230
Manufacturer	HHIP
Product Dimensions	3 x 1 x 6 inches; 8.54 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с^*

Вашата оценка

Scritto da: Martin Kovarik

Good for a few jobs at least

Tapped 2 coolant drains in an engine block with no problems. Still seems to be sharp and in good shape.

Scritto da: Chaosdsm

Nice quality tap!

Big box stores were out of both the 3/8" NPT and the 1/4" NPT locally, so ordered this & a 1/4 as well. Appearance wise, this looks like a better quality tap than the Irwin's I usually buy at half the price. Performance wise, cutting edges are nice, clean, and sharp while lacking the burrs that I normally find on the Irwin taps. This made tapping polycarbonate a beautiful thing, it cut so clean and smooth, it barely took any effort!!! Definitely makes up for the price difference for tapping plastics & hard woods.

Scritto da: Big Deal

Well Made but Rusty

Great price for a HSS tap in this size. Threads look well made and sharp. Only issue is a few spots of rust. Should have had a protective/oil coating.

Scritto da: John Wohlwend

Worked great for a critical repair on a brake caliper.

Had a machine shop use this to tap a brake caliper for a bleeder valve repair kit and it did the job perfectly fine with no visible damage to the tool. The repair is holding up after a month or so with no sign of any leakage.

Scritto da: Wayne Boburg

Got a non-coated HSS tap.

Product intended to tap 304 Stainless; I'll try, but if this breaks, I'll have to buy an extraction set. Guess from whom I'm not buying that?

Scritto da: zemlin

Better than I expected

Appears well made, and the one I received is TiN coated. I’m only tapping plastic 3D printed parts, but it’s working great for that.

Scritto da: Kanaka

Used it to tap a heater hose outlet on a ...

Used it to tap a heater hose outlet on a 292 GM inline motor I am building. Worked okay. Don't normally purchase import tools but the price was right .