Готов за теглене 118607 Адаптер за комплект спирачки с предварително окабеляване

Brand:Tow Ready

3.7/5

lv
364.98

Осигурете безопасно спиране, когато теглите RV или ремарке по пътя с комплекта за управление на спирачката Tow Ready. Този комплект адаптер за окабеляване включва кръгъл, предварително окабелен 7-пътен конектор и 4-спукана гума. С този комплект Brake Make ще намалите износването на спирачките на вашето превозно средство. Без спирачен контролер спирачките и гумите на вашето ремарке може просто да блокират, когато задействате спирачките във вашето превозно средство, което води до всякакви проблеми. Този комплект за управление на пропорционалната спирачка има всичко необходимо за безопасно спиране при теглене на RV или ремарке. Комплектът за окабеляване за управление на спирачката, готов за теглене, включва 5 скоч ключалки, 8 самонарезни винта, пръстеновидни съединители, тежкотоварни прекъсвачи, ремъци за свързване и други, за да направят процеса на инсталиране плавен и прост.

ИНСТАЛИРАЙТЕ ЕЛЕКТРИЧЕСКИ СПИРАЧНИ КОНТРОЛИ: Инсталирайте електрическите спирачни контроли бързо и лесно с готовия за теглене спирачен комплект.
Brand ‎Tow Ready
Country of Origin ‎Taiwan
Customer Reviews 4.6 4.6 out of 5 stars 92 ratings 4.6 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item model number ‎118607
Item Weight ‎0.01 ounces
Manufacturer ‎Draw-Tite
Manufacturer Part Number ‎118607
Model ‎Draw-Tite 118607
OEM Part Number ‎DJSK118607
Product Dimensions ‎8.5 x 2.4 x 10.9 inches

3.7

9 Review
5 Star
80
4 Star
10
3 Star
6
2 Star
0
1 Star
4

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: super dad
Great product
Great product A + shipping was fast
Scritto da: Nick
Wire isn’t long enough
Once installed it works great. Was supposed to be suitable for a 2016 Chrysler Town and Country. The wire was short by about 6 feet. Had to buy additional wire elsewhere. Other than that, no complaints
Scritto da: RoninUT
Exactly what you need if your vehicle already has a 4 way flat trailer plug.
This kit included everything I needed to install a trailer brake controller in my Jeep. I already had the 4 way flat plug but needed the 7 way plug with power and brake wires to keep the trailer batteries charged, and to operate the trailer brakes. Installation is pretty straightforward. The kit includes a few zip ties, but I ordered some much bigger ones to strap the cable to my frame rails. After watching a few videos online I was able to install it using their suggestions for locating the circuit breakers. The hardest part of the whole installation is tapping the brake signal wire. It is in a very difficult location in my vehicle. But since this kit will work with any vehicle with a 4 way flat plug, your installation might go easier. I wish it included some wire loom and some bigger zip ties (and more of them). But otherwise it's a great kit. Probably the best available.
Scritto da: Greg Thompson
Works fine on my 2009 Subaru Forester
Took me a few hours to run the cables and get it all working, but long enough to make it all the way to the engine bay with some to spare. I ran it mostly inside along the door channel. Well made. You do have to have a multi-meter and some experience with wiring diagrams. I'm sure I saved several hundred dollars doing it myself.
Scritto da: Landen Green
Makes it quick and easy
There is plenty of length on a regular cab long bed truck to go from the back to under the hood and into the cab with the duplex wire. I followed the factory harness along the frame rail to under the hood by the PDC, mounted the breakers there, and then went into the cab. For a longer truck, additional wire would be needed. I skipped the electrical terminals and scotch locks the kit comes with and used crimp connectors with built in marine heat shrink for a better result. I made a bracket to hold the 7 way to the back bumper, and it's ready to go. Will definitely buy this kit again. Directions are straight forward and easy to understand.
Scritto da: TrailingEdge
Pretty good but not perfect
The package only has 2 large ring terminals, but you need 3 in order to install a brake controller (1 on negative battery post and 2 on positive battery post). So now I need to go to AutoZone to buy a new one. Also, the wires are a little short and I didn't have enough leftover wire for one of the breaker-to-battery wires. I pieced together a long enough wire but not ideal.
Scritto da: T
Worked like a charm
great kit!
Scritto da: Chris Thompson
Easy to install
Instructions were clear and concise
Scritto da: tr
need bracket and more tie wraps
good quality product! i had enough wire for my jeep liberty therefor didn't need to buy more. i did need to buy more tie wraps, and a bracket to attach the 7 way. although i had to buy these things (which in all fairness could have been included for that price) what i really was hoping for was some instructions. eventully figured it out though researching online. But i will repeat, good quality!

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array