Extech SD800 Регистратор на данни за CO2, влажност и температура

Brand:Extech

2.8/5

lv
1278.97

Вижте по-голям РЕГИСТРАТОР НА ДАННИ ЗА CO2/ВЛАЖНОСТ/ТЕМПЕРАТУРА Наблюдавайте качеството на въздуха в училища, офис сгради, оранжерии, болници и навсякъде, където се генерират високи нива на въглероден диоксид. CO2/Влажност/Температура Datalogger проверява за концентрации на въглероден диоксид и записва данни на 2 GB SD карта във формат на Microsoft Excel за лесно прехвърляне към компютър за анализ. Тройният LCD дисплей показва едновременно и трите параметъра и избираема честота на дискретизация на данните от 5, 10, 30, 60, 120, 300 и 600 секунди. Всяко съхранено показание включва печат за дата и час. Диапазони на измерване: 0 до 4000ppm CO2; 10 до 95 процента RH; -58 до 2372 градуса F (-100 до 1300 градуса C) Температура. КАКВО ИМА В КУТИЯТА В комплект с шест AAA батерии, 2 GB SD карта, универсален адаптер за променлив ток, монтажна скоба и ръководство за потребителя. ПОВЕЧЕ ИНСТРУМЕНТИ EXTECH ЗА ИЗБОР ОТ SD500 (вижте в по-голям размер) РЕГИСТРАТОР НА ДАННИ ЗА ВЛАЖНОСТ/ТЕМПЕРАТУРА Регистратор на данни за влажност/температура записва данни на 2 GB SD карта карта във формат Microsoft Excel за лесно прехвърляне на компютър за анализ. SD500 разполага с двоен LCD, който показва едновременно относителна влажност и температура, и избираема честота на дискретизация на данните от 5, 10, 30, 60, 120, 300 и 600 секунди. Всяко съхранено показание включва печат за дата и час. 10 до 95 процента RH и 32 до 122 градуса F (0 до 50 градуса C) Температурен диапазон. В комплект с шест AAA батерии, 2 GB SD карта, универсален адаптер за променлив ток, монтажна скоба и ръководство за потребителя. SD700 (вижте в по-голям размер) РЕГИСТРАТОР НА ДАННИ ЗА НАЛЯГАНЕ/ВЛАЖНОСТ/ТЕМПЕРАТУРА Записва данни на SD карта във формат Microsoft Excel. Показва барометричното налягане в 3 мерни единици: hPa, mmHg и inHg. Тройният LCD дисплей показва едновременно барометрично налягане (10 до 1100hPa / 7,5 до 825,0 mmHg / 0,29 до 3248 inHg), температура (32 до 122 градуса F / 0 до 50 градуса C) и относителна влажност (10 до 90 процента RH ). Datalogger маркира дата/час и съхранява показанията на 2 GB SD карта във формат Microsoft Excel за лесно прехвърляне към компютър. Избираема честота на дискретизация на данните: 5, 10, 30, 60, 120, 300, 600 секунди. В комплект с шест AAA батерии, 2 GB SD карта, универсален AC адаптер, монтажна скоба и ръководство за потребителя.

Тройният LCD показва едновременно CO2, температура и относителна влажност. NDIR (недисперсивен инфрачервен) CO2 сензор с двойна дължина на вълната не изисква поддръжка. Проверява концентрациите на въглероден диоксид (CO2). Записва данни на SD карта във формат Excel.
Alarm Audible
Alarm ‎Audible
Batteries ‎6 AAA batteries required.
Batteries Included? ‎Yes
Batteries Required? ‎No
Battery Cell Type ‎Alkaline
Brand Extech
Brand ‎Extech
Country of Origin ‎Taiwan
Customer Reviews 3.7 3.7 out of 5 stars 4 ratings 3.7 out of 5 stars
Included Components ‎Product & Instructions Guide
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 3.1 x 1.3 x 5.2 inches
Item Dimensions LxWxH ‎3.1 x 1.3 x 5.2 inches
Item model number ‎SD800
Item Package Quantity ‎1
Item Weight 0.28 Kilograms
Item Weight ‎0.28 Kilograms
Item Weight ‎9.9 ounces
Manufacturer ‎Extech
Number Of Pieces ‎1
Operating Humidity 90 percent
Operating Humidity ‎90 percent
Part Number ‎SD800
Power Source Battery Powered
Power Source ‎Battery Powered
Product Dimensions ‎3.1 x 1.3 x 5.2 inches
Sensor Type Non Dispersive Infrared
Sensor Type ‎Non Dispersive Infrared
Style SD800
Style ‎SD800
Thickness ‎1 Inches
Upper Temperature Rating 50 Degrees Celsius
Upper Temperature Rating ‎50 Degrees Celsius
Warranty Description ‎6 months

2.8

2 Review
5 Star
37
4 Star
13
3 Star
37
2 Star
13
1 Star
0

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: McBeardsalot
Misleading product description: Is not battery operated
Be aware that this product is not battery operated. The 6 AAA batteries are only present to keep the date and clock from resetting when you unplug the device from the wall. In order to take measurements and log data, the unit *must* be plugged into the wall. If you do not need to be mobile, this device may work for you. I rate this product as two stars primarily because I believe the product to be misleading. While it does not explicitly state that the unit can run on battery power alone, I have never known any other device to use a full 6xAAA 9v battery bank to power a real-time clock. It is also very typical for CO2/temperature/humidity monitors and dataloggers of this size to run off of batteries or a wall adapter. The response I received from tech support was that it was clearly stated in the documentation that the batteries only power the clock. While this is technically true, the only place where this is stated is on the final page of the user's manual in small print in the subsection that gives details on the required power supply. I would argue that a consumer's due diligence should not have to include reading the full user's manual to the final page. Additionally, the fact that the battery limitation is mentioned at all is evidence that the company realizes this is atypical. Aside from the battery issue, the device is of mediocre build quality and the buttons felt cheap and were not particularly responsive. Each button press is accompanied by a very loud and high pitched chirp, rendering this exceptionally unpleasant to use in quiet locations. I cannot speak to the quality of the data that the device produces, as I will be sending this unit back and ordering a device from a different manufacturer.
Scritto da: hebohero
Did the job but I hate the battery issue!
Good value, does work, clear and easy to use, solid enough, and does not required a special software (Excel file format). However, there is a big issue about the battery! (Warning) this device required to be plugged into a power outlet all the time, although it has 6 high-performance batteries at the same time! Thus, it is not 100% portable. In other words, the device need both power outlet and 6 high-performance batteries duration of use and recoding data! Why it need 6 high-performance batteries? for saving data in case the power is cut! my PC need one tinny flat battery!ooh.. by the way, the device will not work without installing these batteries even if you plug into socket! In addition, I did not like the separated sensor (CO2), its cable is too short and I prefer if the sensor was included the device structure.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array