AmpFlow P40-250-P Матиран електрически мотор, 250 W, 12 V, 24 V или 36 VDC, 3400 RPM

Brand:AmpFlow

2.8/5

lv
208.54

AmpFlow P40-250-P е палачинков двигател с висок въртящ момент, проектиран да осигурява добра производителност и ефективност на икономична цена. Това се постига чрез използването на четири четки и усъвършенствано електромагнитно компютърно моделиране и дизайн. Моторът е с диаметър 4,0 инча и дължина 3,2 инча. Валът се движи в два висококачествени сачмени лагера. Изводите на двигателя с голям габарит са с дължина 14 инча. Моторът тежи 4,2 паунда и е покрит с висококачествено черно прахово покритие. Този реверсивен мотор може да се използва при напрежение в диапазона от 12V до 36Vdc. При 24 волта скоростта на празен ход е 3400 RPM. Номиналната изходна мощност е 250 W при 2800 RPM при 14 ампера. Пиковата ефективност е 78%. Този мотор се доставя с макара с 13 зъба за 5 mm HTD ремък. Двигателите AmpFlow® се използват в различни приложения, включително роботи, електрически скутери, електрически велосипеди и други лични транспортни системи. Потърсете в Amazon двигатели AmpFlow за повече възможности за избор.

Къс палачинков мотор с шайба с 13 зъба за ремък HTD 5 мм. Пикова ефективност при 24V: 78%. Постоянна мощност: 250 вата (1/3 конски сили). Обороти на празен ход: 3400 при 24 волта; Може да се използва с напрежение в диапазона от 12V до 36VDC. Измерва диаметър 4,0 инча (102 мм) на дължина 3,2 инча (81 мм).
Country of Origin USA
Item model number P40-250-P
Manufacturer Powerhouse Engineering Inc.
Package Dimensions 5.6 x 5.4 x 5.3 inches; 4.2 Pounds

2.8

8 Review
5 Star
32
4 Star
42
3 Star
9
2 Star
0
1 Star
17

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: john angelosanto
is a ok motor
for generate dc power
Scritto da: A. W.
Probably ok if you need the pulley that comes with it.
I bought this motor with the intention of removing the pulley, as the seller stated was possible in one of the answered questions. Since the motor has a D shaft and a circlip, I assumed the pulley wouldn't be pressed on (or if it was, it wouldn't truly be an interference fit). I was wrong. On top of that, the pulley seems to be made of cheese grade sintered metal, which broke when I hit it with a hard rubber mallet (part of the flange broke off). I attempted to heat the pulley with a torch to remove it, but I'm afraid because the shaft is so small/short, I'll get the rest of the motor too hot and damage it. The motor is much noisier than I expected too, though I didn't run it until after I attempted to remove the pulley, so I can't be sure if that's because I damaged the bearings. All in all, $59 + tax wasted.
Scritto da: MRB1953
Good little motor
Good little motor. Operates smooth. Appears to be well made. Would be nice to have had some better documentation for it.
Scritto da: paul
Does the job
I am using it for a Ians BFF Shaker in a flight simulator so far so good. See how long it lasts
Scritto da: Michael Pare
Misleading Photo
I should have heeded the warning from another review that showed the one-sided pulley. AND in addition to that flaw it was also cracked upon arrival! I can't imagine what use-case a one-sided pulley would serve. For double the price of the motor without the pulley, this is bad. It cost me time and extra parts to get this going.
Scritto da: Enrique I
My pulley doesn't have one end.
The motor is ok, but the reason I put 3 stars is that the pulley in the ilustration and the pulley of the motor I received, are not the same. My pulley doesn't have one end. I attach some photos, so you can check the two pulleys are slightly different. Regards.
Scritto da: Donald Rogers
This is the best motor for the job.
I didn't dislike any part of it.
Scritto da: James Klingbile
works
Prompt delivery, item was as advertised

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array