0
0

Обща сума:lv 0.00

Вижте количкатаРазгледайте
LoginRegister
0

Обща сума:lv 0.00

Вижте количкатаРазгледайте
LoginRegister

WEN DPA2412T 24 инча x 12 инча Маса за бормашина с регулируема ограда и ограничител

Brand:WEN

3.5/5

lv
242.60

Помните ли кога можехте да поддържате големите си стари детайли? Изведете своята бормашина на следващото ниво с масата за бормашина WEN. Просторната маса с размери 23-7/8-на-11-7/8-инча създава допълнителни 275 квадратни инча пространство за вашите проекти. Вградените линийки увеличават точността за прецизни и равномерни срезове, докато регулируемата ограда се плъзга напред-назад, за да отговаря на нуждите на всеки проект. Здравото тяло от MDF с дебелина 1 инч предотвратява изкривяване и клатене по време на работа, докато ограничителят на ограничителя се регулира по протежение на ограничителя, за да помогне на центрирането на детайла. Подвижната вложка позволява на потребителите да пробиват напълно своя детайл, без да повредят масата. Съвместим с цялата линия от бормашини WEN, включително 8-инчовата бормашина WEN (модел 4208), 10-инчовата бормашина WEN (модели 4210 и 4212), 12-инчовата бормашина WEN (модел 4214), 15-инчова бормашина WEN (модел 4225) и 17-инчова бормашина WEN (модел 4227). Въпреки че тази бормашина е проектирана с оглед на WEN, нейното универсално прилягане позволява монтаж на повечето бормашини на пазара. Просто затегнете монтажните скоби върху маси с ширина от 5 до 16 инча. И тъй като е продукт на WEN. всичко, за да сте сигурни, че помните WEN.

Количество
Добави в кошницатаКупи сега

EAN: 0044459461258

Категории Наръчни средства и домашно обзавеждане, Електрически и ръчни инструменти, Части и аксесоари за електроинструменти, Части и аксесоари за електроинструменти,

Проектиран да пасва на цялата серия бормашини WEN. Пасва на всяка маса за бормашина с ширина между 5 и 16 инча. Просторната маса е с размери 23-7/8 x 11-7/8 x 1 инча. Разширете работното си пространство с 275 квадратни инча (ширина 23-7/8 инча, дълбочина 11-7/8 инча).
Batteries Required? ‎No
Brand WEN
Brand ‎WEN
Color Metallic
Color ‎Metallic
Customer Reviews 4.4 4.4 out of 5 stars 1,363 ratings 4.4 out of 5 stars
Included Components Drill Press Table
Included Components ‎Drill Press Table
Item model number ‎DPA2412T
Item Package Quantity ‎1
Item Weight ‎10.5 Pounds
Manufacturer ‎WEN
Maximum Chuck Size 0.79 Inches
Maximum Chuck Size ‎0.79 Inches
Measurement System ‎Metric
Part Number ‎DPA2412T
Product Dimensions 11.88"L x 23.88"W x 1"H
Product Dimensions ‎11.88 x 23.88 x 1 inches
Product Dimensions ‎11.88"L x 23.88"W x 1"H
Style ‎Drill Press Table

3.5

13 Review
5 Star
64
4 Star
24
3 Star
7
2 Star
3
1 Star
2

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Judy P
Well made and heavy duty.
The locator blocks are not of the same quality as the core table. I expect to replace them but the table is of decent quality for the price. Good DYI value.
Scritto da: Turtle Feather Creations
A must for the wood shop
This is a must for anyone woodshop where you must make precise repeat holes. The "clamps" that hold it to the press are ingenious. Can be adjusted for different brands/models. It takes some getting used to, but this has changed the production in my shop!
Scritto da: WL
For my Central drill press
Added to my harbor freight drill press. Works great. Added some upgrades to personalize it but over all its great.
Scritto da: Brian
T-Track Screws were Stripped
I received this table tonight and installed it on my WEN Drill Press. I loved how easily it attached to my drill press table, and it was very secure. As I was installing it I noticed that the head of the end screw in the left T-Track wasn't flush, so I got a screwdriver to tighten it. It was stripped. After I got everything put together I wanted to try my new T-Track clamps. They wouldn't fit into the T-Track. My bench grinder is right next to my drill press, so I just ground down the edges until they fit. I placed a piece of wood on the table and put in the right clamp and tightened it down. Worked great. Put in the left clamp and tried to tighten it, and it just pulled up the whole T-Track. I'm returning it to Amazon for a replacement. I think when I get the replacement I'll replace the screws with longer screws, and possibly glue the T-Track in place also. I like this table, just not sure it's worth $50. When I get the replacement I'll revise my review if everything works OK. Update: I received the replacement table. Everything looked good, and the screws in the T-Tracks looked sturdy. Installed the table, and then got to work using it on a project I was doing. I have T-Track clamps to hold my work while I'm drilling. I put one in the left T-Track just fine, but when I went to tighten the one in the right T-Track, it just pulled up the T-Track. I think this is a serious design flaw. The screws must be too short to be able to withstand the pressure since they are screwed into MDF. I bought some machine screws with a flat Phillips head. I'm going to drill completely through the existing screw holes and use these machine screws with nuts on the bottom. I'm also going to glue in the T-Tracks for good measure. One other design flaw. Since most newer drill presses have a handle on the post to raise and lower the table I had to mount the table quite a few inches from the post so it would clear the handle when I'm adjusting the height. If I need to use the fence for a project, this severely reduces the length of the item I'm able to drill. For this reason I don't see myself using the fence much. While I'm not going to take away any more stars, I'm not going to add to them either. When I spend $50 for an item, I don't expect to have to modify it before I can use it. Update 2: I removed the screws from the T-Track. If you look at the photo I uploaded you can see they are only 1/2" screws, which means just slightly over 1/4" of the screw is in the MDF, which is not nearly enough to securely hold the T-Tracks in place when put under pressure of the T-Track clamps. I drilled a 1/8th inch hole completely through each of the 6 existing holes. I used #8-32 x 1" flat Phillips head machine screws. The head of these screws fit into the countersunk holes of the T-Track perfectly. To secure it on the bottom I used a flat washer, lock washer, and a nut. I decided I didn't need to glue the T-Tracks in place. I tested this out using my T-Track clamps and it's working great now. If anyone decides to purchase this table I strongly suggest making the same modification that I did.
Scritto da: Happy Camper
Works very well. Very happy with it. Worth the money.
I like the set up, glad I bought the series with adjustable speed and digital rpm readings. The laser is very helpful as well.
Scritto da: matt
I like the table but could use some improvements.
First off lets start by saying I DO like this table. Now the quick clamps to mount this thing is junk go ahead and throw those things away couldn't get them tight enough to stop all movement so line it up where you want it and drill holes though the table top and original drill press table and use a countersink bit so the bolts will be below the working surface of the table and not interfere with any piece you will be working on and this thing will not budge after that (example in pictures of where I put mine) a little bit of work but you will thank me later. Second I read all the reviews about the t track pulling the screws out and yes they were very small screws and would have never held up another simple fix take the screws out apply some epoxy and re install the track with the screws and clamp down until dry and those puppies wont go anywhere 2 very simple things to improve the function of this table and you should be good to go. Price point of this table you can not beat will buy again if I have any use for one in the future, not to mention the fence and stop block not built great however is just a big add to this table and the rulers that come pre installed they might not last too long but love the extra mile they went to add it. Not a 200$ table but great for the diy guy like myself with those few improvements I mentioned earlier should last me a long time.
Scritto da: Andy Hegedus
Be aware of size and clearance for some drill presses
I bought this to mount onto a Ryobi Table Top Drill press and while it does mount there are clearance issues. To raise and lower the table vis the crank on the vertical mount, I have to undo the table and move it out of the way. Also with the limited throw of the Ryobi you cannot have the fence in place because it hits the the handles on the crank that lowers the drill head. Also wish the T-slots were standard size to accommodate other accessories. All in all limited usefulness.
Scritto da: kenneth trimble
Nice sturdy piece of equipment
Nice sturdy piece of equipment. Great packaging.
Scritto da: dfx
Cumple
Por el precio cumple, nada espectacular, el material es de MDF con melamina, un poco frágil si se cae alguna pieza de la tabla tiende a abollarse sin mas esfuerzo, hay que tener cuidado, tratándola bien dura por un buen tiempo. Excelente servicio de amazon (telefónico, por chat es una verdadera porquería, de unas 10 veces, 10 veces hacen un pésimo trabajo), sin problema me cambiaron la tabla que venia dañada sin costo extra, la cual ya había subido su precio desde amazon us,
Scritto da: Marko Zivkovic
Good for what you pay
It fit my WEN 1408 fine and does its job, but it is obvious why it is so cheap. Had to change the t-tracks which are really thick and non-standard so they will not accept the standard t-bolts. The board is too soft so the t-track easily lifts when clamps are tightened. With powertec t-tracks glued with epoxy and screwed in, the clamps are doing fine. The other problems is the clamps used to fasten it to the drill table. I am afraid to tighten them too much since they are plastic, and they simply cannot hold the table stably. But if you get used to it, change the t-tracks and learn its idiosyncrasies, it is still a fair deal for the money. Does the job.
Scritto da: Chris P
Some Good Some Bad
Half decent quality overall. Easy to setup. Top of table is slick and formica seems durable. The threaded inserts and tiny screws that attaches table to the drill table are terrible - with some moderate tightening, they pulled out pretty easy. I reattached mine with some epoxy and after that you can properly tighten it down.
Scritto da: Carpin Uo
Gran ayuda para el taladro
Ya había fabricado una pero está está bien diseñada podría tener mejor material sin afectar el costo de fabricación la recomiendo mucho mejor para taladro de más de 8 pulgadas
Scritto da: Amazon Customer
Muy útil
Precisamente lo que necesitaba

Свързани продукти

hot
Big Horn 19704B-5PK 7 Star Insert 5/16-18 (5/PK)
0.1/5

lv 84.78

Big Horn 19704B-5PK 7 Star Insert 5/16-18 (5/PK)
0.1/5

lv 84.78

hot
DeWalt N169778 OEM щипка/кука за колан за 20V Max DCD980 DCD985 DCD980L2 DCD985L2 (5 пакета) Оригинална версия
3.8/5

lv 91.28

DeWalt N169778 OEM щипка/кука за колан за 20V Max DCD980 DCD985 DCD980L2 DCD985L2 (5 пакета) Оригинална версия
3.8/5

lv 91.28

hot
Ridgid 17188 винт, капак на картера
0.1/5

lv 50.02

Ridgid 17188 винт, капак на картера
0.1/5

lv 50.02

hot
Мотор Hitachi 371497
3.3/5

lv 813.90

Мотор Hitachi 371497
3.3/5

lv 813.90

hot
Ridgid 91010 Spacer
0.1/5

lv 70.79

Ridgid 91010 Spacer
0.1/5

lv 70.79

hot
Предпазител на двигателя - трим електрод (J20009)
3.3/5

lv 129.91

Предпазител на двигателя - трим електрод (J20009)
3.3/5

lv 129.91

hot
Hitachi 887858 Резервна част за монтаж на тялото на електроинструмента
3.5/5

lv 251.47

Hitachi 887858 Резервна част за монтаж на тялото на електроинструмента
3.5/5

lv 251.47

hot
Hitachi 888136 Резервна част за копче за смяна на електрически инструменти
3.5/5

lv 53.25

Hitachi 888136 Резервна част за копче за смяна на електрически инструменти
3.5/5

lv 53.25

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array

Обща сума:lv 0.00

Вижте количкатаРазгледайте

Категории

Всички категории
Меню Категории Близо до Количка

Menu