Винтове Power Pro 47872, 1/4 x 1-1/2, строителни винтове със звезда, устойчиви на ръжда, бронз с керамично покритие, вана от 5 фунта, 375 бр. 375 бр.

Brand:Power Pro

3.7/5

lv
187.47

ОПИСАНИЕ НА ПРОДУКТА Строителните винтове за изоставане са идеални за следващия ви проект на открито. Обичайните приложения включват палуби, стълби и комплекти за игра. Тези продукти имат функции, които са едновременно впечатляващи и уникални. Начело в списъка е новата технология Star Drive, която на практика елиминира cam-out за плавно шофиране без усилие всеки път. Шансовете за разцепване на дърва са значително намалени от патентованите напречни резби и точката на рязане за захапване на дърво. Тези две функции се комбинират, за да предотвратят разцепването на дървесината чрез смилане на дървесина и отстраняване на влакната от дупката. Използвайте с обработен дървен материал. ОТ ПРОИЗВОДИТЕЛЯ Този продукт има характеристики, които са едновременно впечатляващи и уникални. Начело в списъка е новата технология Star Drive, която на практика елиминира camoout за плавно шофиране без усилие всеки път. Шансовете за разцепване на дърва са значително намалени от патентованите напречни резби и точката на рязане за захапване на дърво. Тези две функции се комбинират, за да предотвратят разцепването на дървесината чрез смилане на дървесина и отстраняване на влакната от дупката.

Вана от 5lb съдържа приблизително 375 части; този асортимент се продава по тегло и действителният брой на бройките може да варира. ПРЕПОРЪЧИТЕЛНА УПОТРЕБА: Безопасен за използване вместо стандартни винтове за закъсване. STAR DRIVE, TRUS HEAD: Елиминирайте гърбицата за плавно шофиране без усилие всеки път. УСТОЙЧИВО НА КОРОЗИЯ: Бронзовото керамично покритие надвишава 1000 часа тест със солен спрей съгласно ASTM B125. ПРЕДНАЗНАЧЕН ЗА ВЪНШНОТО: Обичайните приложения включват палуби, стълби, комплекти за игра и много други дървени проекти на открито.
Drive System Torx
Exterior Finish Epoxy
Head Style Truss
Item Dimensions LxWxH 6.8 x 5.3 x 4.7 inches
Item model number 47872
Manufacturer The Hillman Group
Material Steel
Product Dimensions 6.8 x 5.3 x 4.7 inches; 0.01 Ounces

3.7

8 Review
5 Star
78
4 Star
13
3 Star
4
2 Star
3
1 Star
3

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Roby
Great look send hold
Everything about these lag bolts is first class except for self starting they seldom bite and start anchoring without a pilot hole.
Scritto da: William E Lovelace Jr
TOP NOTCH FRST CLASS WOOD SCREW.
I HAVE BEEN USING THESE SCREWS FOR YEARS. FIRST TIME I HAVE BOUGHT THEM OFF OF AMAZON. IT WONT BE THE LAST TIME. NICE BIG HEAD ELIMINATES A WASHER. LOVE THE STAR DRIVE. I HAVE USED THESE SCREWS TO ATTACH LUMBER TO METAL. DRILL A THROUGH HOLE IN METAL AND RUN SCREW THROUGH IT TO THE WOOD.
Scritto da: Corey
Screws are great, included bit isn't
Great product and I'll buy again, but the included bit broke quickly. Bought a set of Bosch bits and everything is good.
Scritto da: Duane
Best option for a 1.5" length (hard to find short lags)
SPAX also makes (used to make) a 1.5" coated construction lag with a hex-head. I used some of those for attaching my deck posts to the footers. (I may have actually used a 2"?) Anyway, that's the only other brand that I know of with a short-depth coated lag screw, and they are more expensive than these. I'm using these to bottom-screw new floorboards (2x6) on my utility trailer. The original deck was top-screwed using hardened machine screws that were NOT coated or SS (don't get me started...) I have already replaced a couple boards with these and they held up great, so now I'm redoing the entire floor with them. If you only need 10 or so for a small project, Lowe's sells these by the screw. If you need a lot, best to get the whole box. I need 70-80 for the trailer, but at the price of the large box, I figured I'd shell out $20 for essentially a lifetime supply.
Scritto da: Robert M
Overall a good quality screw, but the driver doesn't seat into screw head well enough and creates problems.
I used these screws on my redwood fence. I used steel brackets to hold up the rails, and used these screws to attach the rails to the brackets. First thing I noticed, the torx drive that comes with the screws doesn't fit well into the screw head. They don't seat well and you'll likely slip out of the screw head numerous times. You have to use your free hand to control the screw as you drive it in or it will end up angling into the wood badly. I ended up taking the screw to my local hardware store and finding a better driver that sat well in the head. Huge improvement. The other problem is that the "pre-drilling" effect of the screw can really tear up soft woods like redwood. You have to go very slow at first or you will strip the wood out and won't get a good, snug fit. The first 1/4" of the screw is very serrated to help it drill into the wood. This is good for hardwoods, bad for softwoods. I didn't knock the star off for this though. I took off a star for the driver being lousy.
Scritto da: Charles Cook
Decent star drive
Bends easy, and head strips out similarly. Snapped off several heads too.. I'll let you know if they rust.
Scritto da: Roadrunner
Won't attach wood to metal tube fence framing
I bought these because a reviewer said they were frequently used to attach wood to metal. Maybe to thin metal sheet goods, but who does that? I tried to use them to attach fence boards to 1"x 1" metal tube fence framing and quickly found out their "self drilling" tips didn't penetrate metal. For that you need screws with the flat blade type self drilling tips. Maybe the reviewer was predrilling his holes. I would give these five stars for attaching wood boards to wood framing without predrilling.
Scritto da: bignatedunk
Great quality
Great quality and the price was 1/10th home depot who wants to sell these at .70 a screw!!!

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array