Телена четка с колела Forney 72740, фино гофрирана с 1/4-инчова шестоъгълна дръжка, 4-инча на 0,008-инча

Brand:Forney

3.6/5

lv
53.70

Монтирана на стеблото 4” телена четка с колело с ¼” (6,35 mm) шестостенна дръжка е специално произведена за безпроблемен достъп до тесни отвори и тесни, затворени пространства. Ефективно премахва грозната и вредна ръжда, котлен камък и боя в труднодостъпни места. Отличава се с гофриран стил, идеален за леки до средни приложения. Съвместим с всяка електрическа бормашина с диаметър ¼” (6,35 mm) или пневматична (въздушна) бормашина 01990. Продуктът има максимални 6 000 RPM.

Работи с всяка електрическа бормашина или пневматична бормашина. 1/4-инчов (6,35 мм) шестостенен стебло. Отстранява ръжда, котлен камък и боя в труднодостъпни места. Проектиран за лесен достъп до тесни дупки и затворени зони. Работи с всяка електрическа бормашина или пневматична бормашина. 1/4-инчов (6,35 мм) шестостенен стебло. Отстранява ръжда, котлен камък и боя в труднодостъпни места. Кримпован стил за леки до средни приложения. Проектиран за лесен достъп до тесни дупки и затворени зони.
Accessory Connection Type ‎1/4-Inch hex shank
Assembled Diameter ‎101.6 Millimeters
Batteries Included? ‎No
Batteries Required? ‎No
Customer Reviews 4.6 4.6 out of 5 stars 410 ratings 4.6 out of 5 stars
Cutting Diameter ‎101.6 Millimeters
Finish ‎Chrome
Grit Description ‎Fine
Head Style ‎Hex
Included Components ‎Welding Wire
Installation Method ‎Arc-welding
Is Discontinued By Manufacturer ‎No
Item model number ‎72740
Item Package Quantity ‎1
Item Weight ‎1.6 ounces
Manufacturer ‎Forney
Material ‎Steel
Measurement System ‎Metric
Number Of Pieces ‎1
Part Number ‎72740
Product Dimensions ‎4 x 4 x 1.8 inches
Shape ‎Circular
Size ‎4"-by-.008"
Speed ‎6000 RPM
Style ‎Crimped Wire
Warranty Description ‎90 day warranty against manufacturer defects

3.6

10 Review
5 Star
73
4 Star
17
3 Star
6
2 Star
3
1 Star
1

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: wiredgeorge
These brushes don't hold up well
Generally use 4' Black & Decker fine wire wheel brushes. Tried these and they don't last very long and are not nearly as good a product as the Black & Decker.
Scritto da: Mark Davis
Much thinner. Just what I needed.
Seems very durable.
Scritto da: Rc man
Works good shortly
Works great for a short period and then falls apart. It is gentle on aluminum if that is what you need but be prepared to buy multiples.
Scritto da: DAG
Works well
Just what I wanted. Seems to be good enough quality for my uses.
Scritto da: Chris
Works great and love the price.
I used this to clean up some iron surfaces and man it did a wonderful job. What I like most is that kept its shape the whole time. No wires came off and it did not open up after putting a great deal of pressure.
Scritto da: Blue Sky
It's a wire brush
It works as expected.
Scritto da: S. Texas
Just okay for Blackstone
I used this specifically for resurfacing my Blackstone. I went with fine wire thinking it would be better finish. I should have gone with a coarse wire. It did the job, just took more time. For a 36” griddle, I went through 2 of these. Towards the end of the project, wires began flying off the wheel.
Scritto da: Darien
Love it
I love this wire wheel and I'm happy it doesn't throw wire out, Been using it for a long long time still does good. I've used it on rusty dirty metal (weld prep), to get old lock tight and dirt off bolts, clean my battery terminals, I use it a lot. Id id buy the cup version but the piece that goes into the drill/impact driver broke clean off however i have not had a problem with this one. DOES NOT REMOVE PAINT as well as i thought it would, in fact doesn't remove paint hardly at all
Scritto da: Brad Shortt
lasting longer than I thought
Used to clean brick
Scritto da: john
good
good

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array