Стойка за лебедка Extreme Max 5600.3139 ATV за Kawasaki Brute Force

Brand:‎Extreme Max

3.7/5

lv
178.98

Правилната лебедка е важна, както и монтажът, който използвате с нея. Правилното закрепване на лебедката увеличава максимално ефективността и безопасността на лебедката и безпроблемно интегрира вашата лебедка с вашето ATV. Тази стойка за лебедка Extreme Max пасва на избрани ATV Kawasaki Brute Force (вижте таблицата за подходящи в изображенията на продукта за пълна информация). Нашите стойки за лебедки са предназначени за използване с всички ATV/UTV лебедки от 2000 lbs. до 3600 паунда. със следните схеми за монтаж: стандартен 4 отвора (4,875 x 3) и стандартен 2 отвора. Стойката разполага с прахово боядисана стоманена конструкция за дълготрайна работа и защита от ръжда и повреда. Проектиран за лесен монтаж. Нуждаете се от нова лебедка? Вижте лебедката Extreme Max Bear Claw ATV / UTV, предлагана в модели 3100 lb. (5600.3072) и 3600 lb. (5600.3075). Extreme Max също така предлага съвместими лозови и ролкови накрайници, както и пълна гама от ATV кабели, въжета, куки и други аксесоари.

Няма налични единици
Две години ограничена гаранция. Лесен монтаж, включени изчерпателни инструкции. Стоманената конструкция с прахово покритие осигурява дълготрайна работа и защита от ръжда и повреда. Проектиран за използване с всички ATV/UTV лебедки от 2000 lbs. до 3600 паунда. със следните схеми за монтаж: стандартен 4 отвора (4,875 x 3) и стандартен 2 отвора. Стойка за лебедка за ATV за избрани ATV Kawasaki Brute Force - вижте таблицата за подходящи за пълен списък.
Brand ‎Extreme Max
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 341 ratings 4.6 out of 5 stars
Item model number ‎5600.3139
Item Weight ‎6.65 pounds
Manufacturer ‎Extreme Max
Manufacturer Part Number ‎5600.3139
Product Dimensions ‎14 x 12.5 x 2.5 inches

3.7

13 Review
5 Star
77
4 Star
14
3 Star
4
2 Star
2
1 Star
4

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: jennifer
Mounted right up !
Product mounted right on no need to modify
Scritto da: A Mike and His Lude
‘14 Brute Force Perfect Fit!!
I purchased this winch mount for my 2014 Brute and it fits perfect. The kit Supplied u-bolts and instructions to make this an easy install with no need to go buy any other parts. All though I did switch the u-bolts out for stainless but the supplied hardware was certainly sufficient for the job. My fairlead didn’t fit but that’s MY fault. This mount has a 4 7/8” fairlead hole mount ( holes measured on center) and my fairlead was to small. 4 7/8” is pretty standard so I don’t know why mine was smaller. Anyway, it worked out perfectly ! Thanks
Scritto da: R. S. Jones
Fits 2005 Brute Force 750 just fine
The mounting plate sits in the required space with all the proper angles. I guess the bargain comes from the generic hardware. They are U-bolts available from any hardware store. They fit the frame pretty tight and scratched up the frame paint pretty bad. A possible rust location is now there for sure. The brute force doesn't have pure vertical frame bars, thus I twisted the second U-bolt and it fit better.
Scritto da: Bill U.
Rear u bolt holes were drilled ofse the wrong way. No big deal if you have any experience.
Fit perfectly on my 2012 kawasaki brute force 750.Had to modify the rear mounting holes a bit but no big deal.The rear u bolts were also a little small but I got them on. Great for the money
Scritto da: Paul
Easy install
Great fit for the brute force 750 however, front platefor the cable angles down. I would rather it face straight.
Scritto da: Mike Hastings
Great product
This winch mount installed without removing anything and was super ez. The hardware was all there and worked perfectly. This was put on my new 2022 bruteforce.
Scritto da: zookie
ggod fit
works well, seems strong
Scritto da: Jomama
Fit perfect, extremely cheap but one u bolt was bad
Low price good fit just had to replace one u bolt
Scritto da: Kyle riley
Price is right
The plate is good the front u-bolts fit perfect the rear was a nightmare. It took about a half hour to shape the u-bolts in a vice to make them work and the holes were powder coat to heavy for them to fit through. Plate is good hardware is meant to go in your bolt bin
Scritto da: Amazon Customer
Good for the money
Was very good for the money and came with everything described and fit very good !!
Scritto da: RP
High quality mounting plate
The mount itself is perfect, it fit my 2016 brute force 750 perfect. Makes for a nice clean job. Supplied u-bolts aren't great so I used my own. I'm happy with the purchase.
Scritto da: Sophie
Well made
Quality product , easy install and fits perfectly on my 2021 brute force 750 .
Scritto da: Corey
Great buy!
Fits perfect. Don’t bother messing around with the universal that comes with winches.

Свързани продукти

hot
WARN 94700 4700 DC Лебедка
4.1/5

lv 2394.71

WARN 94700 4700 DC Лебедка
4.1/5

lv 2394.71

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array