Смяна на преливник за скимер Blue Devil, преливник за скимер за плувен басейн - 8-инчов

Brand:Blue Devil

3.4/5

lv
90.30

Поддържането на вашия басейн чист никога не е било по-лесно с резервната порта Blue Devil Skimmer Weir! Тази преграда за плувен басейн е проектирана да бъде заместител с превъзходно качество на стандартните скимери за басейни. Blue Devil Weir е необходима част от вашата скимерна система, като предпазва листа, клонки, насекоми и други отпадъци от повърхността на водата. Водата се засмуква през входа на филтъра и се задържа на място от подвижната врата на преливника, за да задържи нежеланите отпадъци в скимера за отстраняване. Преливникът също така предотвратява навлизането на изместен въздух във филтърната и помпената система, докато хората плуват, което позволява на системата да функционира правилно. Преливникът Blue Devil Skimmer е толкова лесен за инсталиране! Просто задръжте новия си преливник в скимера, издърпайте зеления кабел, за да освободите опорните колчета, и сте готови за работа! Преливникът е с ширина 8, идеален размер за няколко марки скимери за басейни.

ФУНКЦИОНАЛЕН РАЗМЕР: Размерът на вратата с ширина 8 инча се побира в 8-инчови скимери за басейни. ИЗДРЪЖЛИВА КОНСТРУКЦИЯ: Здравата пластмасова конструкция издържа години на употреба. ЛЕСНО ИНСТАЛИРАНЕ: Просто задръжте преливника на място и издърпайте кабела, за да освободите щифтовете за бързо сглобяване без инструменти. ЗАЩИТА НА ПОМПАТА И ФИЛТЪРНАТА СИСТЕМА: Предотвратява навлизането на излишен въздух в помпата и филтърната система, докато хората са в басейна. ПАЗЕТЕ ВАШИЯ ПЛУВЕН БАСЕЙН ЧИСТ: Помага за почистване на водната повърхност и запазване на листа, клонки и други отпадъци в скимера за почистване.
Brand Blue Devil
Color White
Country of Origin Mexico
Customer Reviews 4.3 4.3 out of 5 stars 228 ratings 4.3 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 8 x 5 x 1.3 inches
Item model number B8508
Item Weight 4.8 Ounces
Manufacturer Valterra Products, LLC
Material Plastic
Product Dimensions 8 x 5 x 1.3 inches
Style Above Ground

3.4

9 Review
5 Star
60
4 Star
22
3 Star
11
2 Star
2
1 Star
6

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: VA Beach
Working great for 5 years
I bought this in 2018 and now, in 2023, it's still working great. It's not really showing any signs of wear so I expect it to keep functioning quite a bit longer. I'm very happy with the purchase.
Scritto da: Billy Pilgrim
Perfect fit
The green cord was hard to pull out, but once it was in position, the gate worked great. Huge improvement in water velocity.
Scritto da: K. Batz
Great universal door- doesn't always stay
In previous ones, there was a blue wire to pull to install. This one had little metal pins to pull out once the door was in. The pin heads are small and smooth and can't be pulled out under water. They also pop out often and you have to hope you can find the spring piece. Wish they offered replacement parts.
Scritto da: nrebk
It works
Had to modify it a little to fit but works great
Scritto da: geoffrey johnson
Instructions are real lacking but the weir works fine
It works as a universal fits all per the opening, e.g. if you are replacing the factory fit 8.5in weir need to get an 8in an will have slightly smaller weir flap now. The reason 3 stars is instructions are way too brief unclear. It "installs"/attaches inside your skimmer using its tension rod not unlike shower curtain tension rods. The tension rod is "locked" by 2 pins that the "instructions" say "do not pull pins until installed" which is hard/impossible if you install it where it needs to be to work b/c you cannot get to the pins at that point. Note you will need pliers to pull the pins. What you need to do is insert the Weir into the skimmer and pull the pins while you can get to them, the tension rod will shoot out to the side walls of skimmer, and then slide the weir lower into position. I did mine from inside the pool. Also the weir is hollow and open ended on each side with Styrofoam block inside that I thought was packing material and removed, but actually the styrofoam is needed for the weir flap to work, so I got to install the weir twice ;) . Again instructions are not clear but just think of it as a tension rod system that simply needs to be released by pulling pins (need pliers for that) and simply slide it into the skimmer housing. BTW you can pull the pins before inserting the weir in the skimmer but need to make sure the tension rod at each end is pressed against something solid (pool decking in my case) so it doesnt shoot out and loose spring.
Scritto da: Knarfster
Super easy to install and a bargain
Way cheaper than a hayward part and super easy to install. It was the right size out of the box.
Scritto da: Rajmitch
Ignore the Directions
The directions said to "pull a string" to release the spring-loaded pins which hold it in place. Yet there is no string. What you really have to do is pull these metal pins out of the front (facing the pool) to release the spring. My suggestion is to pull one and then set it in place, then pull the second one out. Other than that, it does what it should.
Scritto da: Vegas Aardvark
Cheap gate
You get what you pay for, I replace this each year as it pops off. Works well, but it doesn’t last very long
Scritto da: Sparky
Works as it should
works as it should

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array