0
0

Обща сума:lv 0.00

Вижте количкатаРазгледайте
LoginRegister
0

Обща сума:lv 0.00

Вижте количкатаРазгледайте
LoginRegister

Шлифовъчно колело Norton, пейка Gemini и пиедестал Настолно шлифовъчно колело от алуминиев оксид, фино зърнесто 6-инчово шлифовъчно колело, опаковка от 1 6 инча 3/4 инча 1 инча Кръгъл отвор 100/120 4140 RPM 07660788235 1

Brand:Norton

3.2/5

lv
100.79

За използване на всички шлифовъчни машини, монтирани на маса и пиедестал, за ръчно премахване на грапавини, заточване, оформяне и ограничено отстраняване на материал от всички видове материали. Телескопичните пластмасови втулки позволяват колелото да пасва на повечето стандартни размери на беседката.

Количество
Добави в кошницатаКупи сега

EAN: 0076607882356

Категории Промишлени и научни разработки, Абразивни и довършителни продукти, Абразивни колела и дискове, Шлайфане на маси и пиедестали Отрязващи дискове,

0. Оразмерен като 6 шлифовъчно колело с стъкловидна връзка, това шлифовъчно колело е проектирано да поддържа превъзходна форма и устойчивост на износване. Универсален върху различни повърхности, включително неръждаема стомана, твърди и меки въглеродни стомани, титан, алуминий, месинг и желязо. Тази настолна шлифовъчна машина е добър избор за премахване на мустаци и заточване на инструменти на настолни и пиедестални шлифовъчни машини с работни скорости до 4140 RPM. Колелата за шлифовъчна маса Norton Gemini и пиедестал са проектирани с качествен сив алуминиев оксид за премахване на ръбове и заточване на инструменти.
Brand Norton
Compatible Devices Bench Grinder
Country of Origin USA
Department Unisex Adult
Domestic Shipping Item can be shipped within U.S.
Grit Material Aluminum Oxide
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item Diameter 6 Inches
Item Dimensions LxWxH 6.2 x 7.7 x 1.3 inches
Item model number 07660788235
Manufacturer St. Gobain Abrasives
Product Dimensions 6.2 x 7.7 x 1.3 inches; 1.63 Pounds

3.2

11 Review
5 Star
62
4 Star
17
3 Star
5
2 Star
6
1 Star
10

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Robert
Doesn’t spin straight
Doesn’t spin straight
Scritto da: Picky buyer 99
Quality grinding wheel!
I was looking for a fine hard grinding wheel and this wheel was perfect. Overall it was great but the packaging was not good and there was a small chip on one side of the wheel, I am keeping it as the chip does not interfere with grinding.
Scritto da: Charles A. Miess
Good wheel, questionable shipping and handling
The wheel arrived with a chipped front edge. Although it was not packaged properly (loose in the box) the amazon box showed no signs of rough handling. The thin inner box (Norton's) that the wheel came in had seams split and other damage that suggested rough handling BEFORE the item was shipped to me. In addition, I did not find the chip in the box. I suspect that this was not Norton's fault, but can't be sure of that so I deducted one star. This was one of four grinding wheels that I had ordered. They arrived in three different packages. None of the packages had sufficient packing material, but this was the only one damaged. I performed the "ring test" to assure myself that there were no hidden cracks which could produce disasterous results at 3450 RPM. I installed the wheel and dressed it up and it works fine despite the chipped edge. I have contacted amazon's packaging department and have registered my complaints with them. I made it clear that damaged wheels are a serious safety threat to users so I am cautiously optimistic that they will resolve this issue promptly.
Scritto da: Joseph A. Mecca
Wasn't too happy with Norton
I've used good quality wheels with amazing spacers that actually filled the entire whole and the reducers fit together like a mold. My main reason for returning was because of damaged packaging which we all know that doesn't instill much confidence in safety. However, I did have a chance to inspect before requesting a replacement and for my purposes, it wasn't even close to a quality wheel. Reducers didn't fit well together and they appeared to be designed for a 1/2" grinding wheel. The rest of the stone also appeared to be handled quite a few times before it was sold to me based on the amount of color inconsistency and that actually might be a seller issue. It's going back and I will be staying with the better brands.
Scritto da: Jim Ashford
quality product
as discribed
Scritto da: Kali Amos
Great with some work.
Great wheel, yes at first it runs out of true in all directions. But after taking a 1" O.D. piece of Aluminum round bar, chuck it up in the lathe and bore the ID to 5/8". Put that in place of the blue spacers and the run out becomes minimal. Once running true the wheel is hard wearing but cuts with a sharp action. I suggest a diamond wheel dresser. Good for hss and will cut C2 carbide but not efficiently. I mainly use it for lathe tooling and sharpening drills.
Scritto da: Fisqual
Good enough for my needs; not well balanced
This wheel is good enough for my needs (sharpening mower blades and shaving down aftermarket ill-fitting car parts) but the other reviewers mentioning that the wheel is out of round or out of balance are on to something... I installed this Norton wheel in place of the original 20 year old wheel on my Delta bench grinder. The old wheel was worn down to less than half the size of this new one. Since I was literally 11 years old when I bought this grinder new, I can't accurately remember if my grinder used to vibrate and "walk" this much, but I am annoyed just a bit. I may try a different wheel, or I may finally bolt this thing to my workbench since I've been meaning to do that since I bought it. ...But if I'm going to all that trouble I might just upgrade to something bigger/more powerful anyway since this was basically the cheapest one available at Handy Andy as it was going out of business...
Scritto da: Leighv
wew
Pro's: it did not fly apart at rated speed. Cons: wheel is not true axially or radially; the center bushings are garbage; arrived with a chip off one of the edges; could not be trued with a dressing stone. threw away the wheel.
Scritto da: Matt
High quality product with the required shims
This grinding wheel fit my 5” grinder without any issues. It also came with all the necessary shims to fit my particular bench grinder. It comes with 4 shims/spacers allowing it to fit various grinder shafts. After a quick trial run, the grinding wheel was well balanced (no wobbling). Note that it’s max RPM is 4970. Check your device before you buy.
Scritto da: Amazon Customer
Works ok
Decent quality abrasive, but took some patience to get it to turn true and not wobble. Poor quality arbor bushings.
Scritto da: Jacques Phillips
Ponctualité
Mercis

Свързани продукти

hot
Bosch GWX27AL450 4-1/2 инча x .1/4 инча X-LOCK Arbor Тип 27 Абразивен диск за шлайфане на метал със зърненост 24
0.1/5

lv 56.13

Bosch GWX27AL450 4-1/2 инча x .1/4 инча X-LOCK Arbor Тип 27 Абразивен диск за шлайфане на метал със зърненост 24
0.1/5

lv 56.13

hot
Stens нов шлифовъчен диск 750-111 8 x 1 x 5/8 36 грит Ruby
3.6/5

lv 263.50

Stens нов шлифовъчен диск 750-111 8 x 1 x 5/8 36 грит Ruby
3.6/5

lv 263.50

hot
Sunex SXC606GW6 2-инчов шлифовъчен диск, 6 пакета
3.3/5

lv 103.10

Sunex SXC606GW6 2-инчов шлифовъчен диск, 6 пакета
3.3/5

lv 103.10

hot
Mercer Abrasives 626022-25 Тип 27 Гъвкав шлифовъчен диск с вдлъбнат център, за метал 4-1/2-инча на 1/8-инча на 7/8-инча, 25 пакета 60 зърна
0.1/5

lv 221.73

Mercer Abrasives 626022-25 Тип 27 Гъвкав шлифовъчен диск с вдлъбнат център, за метал 4-1/2-инча на 1/8-инча на 7/8-инча, 25 пакета 60 зърна
0.1/5

lv 221.73

hot
Scotch-Brite 08969-калъф Light Burring Wheel, 12 in x 4 in x 5 in 7S FIN, 1 в калъф, сив
0.1/5

lv 911.79

Scotch-Brite 08969-калъф Light Burring Wheel, 12 in x 4 in x 5 in 7S FIN, 1 в калъф, сив
0.1/5

lv 911.79

hot
Настолно моторно колело Cubitron II Scotch-Brite - Колело за премахване на ръбове и довършителни работи от нетъкан метал - Обединено колело - Може да се обработва - 7744 - 6' диам.
4.1/5

lv 690.98

Настолно моторно колело Cubitron II Scotch-Brite - Колело за премахване на ръбове и довършителни работи от нетъкан метал - Обединено колело - Може да се обработва - 7744 - 6' диам.
4.1/5

lv 690.98

hot
POWERTEC 15516-P2 Шлифовъчен диск от алуминиев оксид, 8 x 1 с 5/8 втулка, 36 зърна, 2 PK
0.1/5

lv 201.21

POWERTEC 15516-P2 Шлифовъчен диск от алуминиев оксид, 8 x 1 с 5/8 втулка, 36 зърна, 2 PK
0.1/5

lv 201.21

hot
United Abrasives- SAIT VW ​​10 X 1 X 1-1/4 A36X (БРОЙ: 1), Мулти, 28040
3.5/5

lv 233.69

United Abrasives- SAIT VW ​​10 X 1 X 1-1/4 A36X (БРОЙ: 1), Мулти, 28040
3.5/5

lv 233.69

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array

Обща сума:lv 0.00

Вижте количкатаРазгледайте

Категории

Всички категории
Меню Категории Близо до Количка

Menu