SharkBite 1 инч x 1 инч FIP x 24 инча гофриран гъвкав конектор за бойлер от неръждаема стомана, Push To Connect месингов водопроводен фитинг, PEX тръба, мед, CPVC, PE-RT, HDPE, SS3094FLEX24LF 1 инча x 1 инча x 24 инча.

Name: SharkBite 1 инч x 1 инч FIP x 24 инча гофриран гъвкав конектор за бойлер от неръждаема стомана, Push To Connect месингов водопроводен фитинг, PEX тръба, мед, CPVC, PE-RT, HDPE, SS3094FLEX24LF 1 инча x 1 инча x 24 инча.
Brand: SharkBite
SKU: 0697285011045
Price: 121.67 EUR
Availability: InStock

Brand:SharkBite

3.8/5

lv
121.67

Този гъвкав маркуч за бойлер SharkBite, предлаган от гофрирана неръждаема стомана, ви позволява да свързвате бойлери със съществуващи тръби, които не се подреждат бързо и лесно. Този дизайн за свързване с натискане е идеален за тесни пространства и осигурява чиста връзка без течове. Тази интуитивна връзка за бойлер е съвместима с PEX тръби, PE-RT, CPVC и медни тръби във всякаква комбинация. Този преносим конектор за бойлер от неръждаема стомана не изисква специални инструменти, запояване или лепило и може просто да се завърти за по-лесен и бърз монтаж. Инструментите и фитингите SharkBite отговарят на същите високи стандарти за търговски и жилищни водопроводни приложения, съчетавайки издръжливост и лекота на използване, подходящи за търговски ремонти или проекти за подобряване на дома. Конекторите за бойлер SharkBite имат максимална работна температура от 200 градуса F и максимално работно налягане от 200 PSI. Доказан на място с повече от 550 милиона връзки, този водопроводен инструмент SharkBite е одобрен за газови водни и електрически нагреватели с вентилационни отвори за дим.

Количество

Добави в кошницата Купи сега

EAN: 0697285011045

Категории Наръчни средства и домашно обзавеждане, Промишлени и научни разработки, Строителни инсталации, Тръби, тръбна арматура и аксесоари, Тръби/шлангове,

СПЕЦИФИКАЦИИ: Конекторите за бойлер SharkBite имат максимална работна температура от 200 градуса F и максимално работно налягане от 200 PSI; одобрен за газови водни и електрически нагреватели с вентилационен отвор. ПРЕДПОЧИТАНИ ОТ ПРОФЕСИОНАЛИТЕ: Инструментите и фитингите SharkBite отговарят на същите високи стандарти за търговски и жилищни водопроводни приложения; подходящ за търговски ремонти или проекти за подобряване на дома; осигурява чиста връзка без течове и не съдържа олово. ЛЕСЕН ЗА МОНТАЖ: Този месингов фитинг за бойлер намалява нуждата от допълнителни преходни фитинги; позволява бърз и лесен монтаж, без инструменти, кримпване, лепило или запояване; отстранете с помощта на скоба за разединяване или щипка за разединяване. ГЪВКАВ: Този гъвкав съединител за бойлер работи добре с PEX тръби, PE-RT, CPVC и медни тръби. SHARKBITE КОНЕКТОР ЗА ВОДОНАГРЯТ: Този преносим конектор за бойлер, предлаган от гофрирана неръждаема стомана, ви позволява да свържете бойлери със съществуващи тръби, които не се подреждат бързо и лесно; идеален за работа в тесни пространства.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Color	Stainless Steel
Color	‎Stainless Steel
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 373 ratings 4.7 out of 5 stars
Exterior Finish	Brass
Exterior Finish	‎Brass
Included Components	‎Corrugated Stainless Steel Hose
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	24.02 x 1 x 1 inches
Item Dimensions LxWxH	‎24.02 x 1 x 1 inches
Item model number	‎SS3094FLEX24LF
Item Package Quantity	‎1
Item Weight	‎13.6 ounces
Manufacturer	‎Cash Acme
Material	Stainless Steel
Material	‎Stainless Steel
Number Of Pieces	1
Number Of Pieces	‎1
Part Number	‎SS3094FLEX24LFA
Product Dimensions	‎24.02 x 1 x 1 inches
Size	1 in. x 1 in. x 24 in.
Size	‎1 in. x 1 in. x 24 in.
Thread Size	1 inch
Thread Size	‎1 inch

5 Star

4 Star

3 Star

2 Star

1 Star

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с^*

Вашата оценка

Scritto da: Chris H

Makes installing a water softener a lot easier.

These let me be less careful about where the PEX ended. I found it easy to bend them to the right shape to fit where the pipes happened to be. The out pipe is in line with the old copper pipe, I could have used a few elbows to move it over to the left but with these I just needed to bend it round the inlet pipe. No problems with leaks, I just snugged the NPT connectors down. The sharkbite connectors can be a bit fiddley. I got the inner sleeve hung up one time and damaged it. So what I do now on PEX is remove the inner sleeve, then put a bit of silicon O-ring lube to hold it in place and insert it into the pipe, then insert the pipe with inner sleeve into the connector. Much easier to guarantee it is right.

Scritto da: Kent W. Viklund

Easy

It does the job quickly.

Scritto da: Jay Domingo

Love it

Use this on my water softener and I have to say it’s holding up

Scritto da: Happy905

Made my Water Softener Installation so much Easier

I bought these on the recommendation of a guy on youtube after watching his water softener installation on youtube. With these sharkbites, we were able to install the water softener ourselves, saving us lots of money. No welding necessary. These will connect to the copper pipes like magic, with no leaks. Love them!

Scritto da: BSarkady

So simple to install.

I replaced my water softener. I thought I could simply line up the old connector with the new water softener. Unfortunately that was not the case. I went to a plumbing store and was told I would need to cut the pex tubing and get the proper size connectors in stalled. The plumbing store did not have an exact fit but could make it work with extra parts, not the best option. Amazon had exactly what I needed. I was a little dubious about using a SharkBite connector, I mean how could something you just push on hold the pressure and not leak. Well I am here to tell you that this turned out to be one of the simplest plumbing jobs I have ever done. I cut the pex where I needed, pushed the SharkBite on and connected the other end to the water softener. Did that for both the in and out lines in a matter of minutes. Turned the water back on nervously, went back into the utility room. No leaks at all. It has now been in place nearly two months with zero issues. I highly recommend this product.

Scritto da: Jason

Perfect for my water softener installation

It was time to replace my 19 year old Kenmore water softener. I was quoted $400 installation fee from a plumber. These hoses saved me about $350. I just had to cut my pipes, deburr the ends and slip the SharkBite on. It couldn't be any simpler. Taking the burrs off the end is extremely important or you will cut the O-ring inside the hose. The SharkBite deburr tool worked pretty terrible. I ended up using 400 gritt sandpaper then followed it up with 1000 gritt. That gave my pipes a nice smooth end and polished the pipes themselves. I used the SharkBite tool to mark the depth on the pipes then just slid them on. Perfect leak free seal. My entire water softener installation only took about 30 minutes with these hoses.

Scritto da: Steve F.

Extremely rigid

This works as expected, however the flexible portion is extremely rigid, so you need to be really careful to over bend it a bit so that it isn't putting excess pressure on the most likely plastic fitting it is threaded onto.

Scritto da: Kirk

Quit connection

Are use these connections to install a water softener in our garage. They connected perfectly to the incoming water line into the water softener control had no leaks installed in 30 seconds.

Scritto da: Yu Zhang

Five Stars

great stuff

Scritto da: Amazon Customer

Sharkbite should recall theses 1" flexible connectors

Sharkbite are great products. I pretty much ran my entire house water lines with sharkbite products. Most of them are very good quality and reliable. However, this one 1 inch × 1 inch flexible water heater connector is not the case. I bought two, one for hot and one for cold and did a water test. One was okay and one leaked immediately from the push-connect side. I pushed the connect to the bottom and could not push further. Also, I noted the rubber washers on the thread side broke apart after I removed the leaked one. I buy them brand new and have not put them in use yet. Just water testing. Luckily I have not turned on my gas to boil the water. I have reviewed other user's comments and found a couple buyers had the same issues as mine, water leaking and broken rubber washers after new installations. Looks like these are common issues for these 1 inch currogarated flexible connectors. I don't know how to ask for warranty for these. They are not cheap. I think Sharkbite should recall these 1 inch connectors before they made huge damages to users properties because these appear to fail very easily.

Scritto da: Just the facts

Gasket, EPDM, Washer missing

I ordered two of these. One arrived without the washer shown in the image. Returned one and took the replacement option. The replacement also did not have the gasket. Currently in the process of returning a second time and purchasing another replacement.