SharkBite 1/2-инчов MNPT адаптер, Push to Connect месингов водопроводен фитинг, PEX тръба, мед, CPVC, PE-RT, HDPE, U120LFA 1/2 инча.

Brand:SharkBite

3.7/5

lv
55.60

ОПИСАНИЕ НА ПРОДУКТА Опростете водопроводните си нужди с мъжкия адаптер SharkBite Push to Connect MNPT. Съставен от издръжлив безоловен месинг и включващ дизайн с пълен поток за максимално изтичане на вода, фитингите SharkBite могат да се използват с всяка комбинация от медни, PEX, CPVC или PE-RT тръби и разполагат с дизайн за лесно натискане за свързване, позволяващ бърз монтаж. Не са необходими кримпване, лепило, запояване или инструменти, просто поставете тръбата и зъбите от неръждаема стомана се захапват и захващат здраво, докато специално формулиран О-пръстен се компресира, за да създаде перфектно уплътнение. Адаптерът MNPT може лесно да се разглоби с помощта на инструмент за разединяване, така че фитингите и клапаните да могат лесно да се сменят и използват повторно (инструментът за разединяване не е включен). MNPT фитингът може дори да се завърти след сглобяването, за да позволи по-лесен монтаж в тесни пространства. Този водопроводен фитинг MNPT е сертифицирано произведено съединение, което може да се монтира в мокри линии и както за подземни, така и за приложения зад стената. Адаптерът за натискане за свързване MNPT е оценен за 200 psi и 200 градуса F и се предлага с 25 години гаранция. ОТ ПРОИЗВОДИТЕЛЯ SharkBite е системата за свързване, която наистина се налага. Това е най-лесният начин за съединяване на медни, CPVC или PEX тръби във всяка комбинация - без запояване, скоби, съединения или лепило. Просто поставете тръбата и зъбите от неръждаема стомана захапват и захващат здраво, докато специално формулиран О-пръстен се компресира, за да създаде перфектно уплътнение. Разглобяването е също толкова бързо с помощта на лесния инструмент за изключване. Така фитингите и клапаните могат лесно да се сменят и използват повторно. Те дори могат да се завъртат след сглобяване за по-лесен монтаж в тесни пространства. Вземете SharkBite и се захванете със следващия си водопроводен проект. Тези фитинги не съдържат олово и отговарят на всички изисквания за водопровод в Калифорния и Върмонт.

СЕРТИФИЦИРАН: MNPT фитингът е сертифициран като произведена връзка и може да се използва за подземни и задстенни приложения без панели за достъп; оценен за 200 psi и 200 градуса F. ИЗДРЪЖЛИВ: Фитингът е без олово и е устойчив на корозия за дълготрайна издръжливост и надеждност. СЪВМЕСТИМ С ТЕСНИ ПРОСТРАНСТВА: Месинговият фитинг може лесно да се завърти върху тръбата след монтажа за използване в тесни пространства. ЛЕСЕН ЗА ИЗПОЛЗВАНЕ: Правият конектор разполага с иновативен дизайн за свързване с натискане, позволяващ бърз и лесен монтаж; не са необходими инструменти, запояване, кримпване или лепило. МЪЖКИ МЪЖКИ ФИТИНГ: Мъжкият фитинг може да се използва за свързване към всяка комбинация от медни, PEX, CPVC или PE-RT тръби; може да се използва за мокри линии.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color Brass
Color ‎Brass
Connector Type Adapter
Connector Type ‎Adapter
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 2,944 ratings 4.7 out of 5 stars
Exterior Finish Brass
Exterior Finish ‎Brass
Finish ‎Brass
Included Components ‎Fitting
Installation Method ‎SharkBite Push-To-Connect
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10.75 x 4 x 6.25 inches
Item Dimensions LxWxH ‎10.75 x 4 x 6.25 inches
Item model number ‎U120LFA
Item Package Quantity ‎1
Item Weight 0.1 Pounds
Item Weight ‎0.1 Pounds
Item Weight ‎1.6 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Measurement System ‎Inch
Number Of Pieces 2
Number Of Pieces ‎2
Part Number ‎U120LFA
Product Dimensions ‎10.75 x 4 x 6.25 inches
Size 1/2 in.
Size ‎1/2 in.
Style ‎Brass Push Male Adapter
Thread Type NPT
Thread Type ‎NPT
Warranty Description ‎Lifetime

3.7

13 Review
5 Star
82
4 Star
11
3 Star
3
2 Star
1
1 Star
3

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: AmazoCedric
The Amazing Sharkbite 1-1/4 connector fitting
This fitting is the answer to replacing the unreliable ugly boot coupling for smooth copper pipes coming out the wall. This is the the answer for older homes with copper pipes. Tight fit over the copper pipe with no leaks. Sharkbite a friend for life.
Scritto da: Wendy Chan
It works!
Easy to install and very solid connection. It serve the purpose.
Scritto da: John
Quality
Excellent product
Scritto da: Veetuch
Easy to use
Love using Shark Bite connectors, especially when I have to do connections inside the rafters. No soldering with a torch and these are simple push onto your pipe and they stay in place. Good quality material and no leaking. Recommended them for your project.
Scritto da: Anonimo
Initially concerned....
Not gonna lie. When I first got these I was concerned about leaks and waking up to my basement flooding as I had never used them. I'm used to either brazing copper pipes or priming and gluing pvc tubing. I'm a bit of a control guy and when I moved into my house years ago had ripped out the horror that was the tubing entering my basement from the well pump.. put in a whole house filter, pressure tank, other, removable filters and carbon filters, water softener etc. After years of use the softener had given up and the mechanisms sprung leaks all over. I wanted to take that out and instead put in an iron removing filter as our sinks and toilets need constant scrubbing with some of our lighter clothes becoming "work on the car" items due to staining. I read a lot of reviews here and elsewhere about the sharkbite connectors and wound up ordering them.. heck, they were returning so why not? I cut cpvc to length and put connected everything with sharkbite elbows, reducers, and a valves. Once I slipped everything together, crossed my fingers and opened up the water. Hmm,.. so far so good but lets wait and see.. turned on the water throughout the house and watched everything pop and shake as air bled out of the system and pressurized to 70psi. Okay.. so far so good. Cleaned up and went upstairs to eat.. came back down checking for leaks... went to watch tv (The Boys-started slow but ROCKS)... wife and I took turns checking for leaks. Went to bed... got up a few times... and now it's been a few weeks. Not a drop of water and none of the pipes has tried to slip out as we have them all marked for this purpose. These things rock! One of the things I like best is that you can rotate the fittings (ie; the pipes can still move, rotate etc) without leaks which means it's all super forgiving if you get your lengths slightly off and stuff is not 100% straight and true.. it adjusts.. something PVC and Copper do NOT do... and I can also move stuff around a few inches if needed without cutting/de-brazing pipes etc. I'm a convert!
Scritto da: Reality Check
This fitting really saved the day
I had to change out a tub valve through a tiny 7 inch round opening . This fitting had 4 pipes: A hot and cold PEX, a PEX running to the shower, and a hard copper line running to the tub spout. All fittings were iron pipe thread into the valve. The PEX fittings will slip and rotate (with some difficulty) so I was able to unscrew them, and I was barely able to fit a mini tubing cutter around the copper to cut it. That's where this SharkBite fitting came in. With a bit of delicate attention to the end of the copper to make sure that it wasn't sharp, this fitting slid right over the copper and allowed me to tighten it into the valve body. Everything lined up like before and nothing leaked. This took all day, but that was due to the tiny opening that i had to work through. This SharkBite was the easiest to install (30 seconds) and everything is just as rigid as before. Well worth the money. My only concern was that there was a bit of solder on the pipe that I delicately filed off. After that I polished it off with 600 grit sandpaper to eliminate any possible remaining file marks. If there had been a solder bump or file groove, it is quite possible that would have resulted in a leak, since the sealing location point is to the outside of the pipe. In the end all worked out well, and I am satisfied.
Scritto da: Tom Holland PA
Easy
If you're as old as me and handy, you've experienced sweating copper pipe with lead solder then the newer lead-free, making sure there isn't a drop of water in the line and hoping, compression fittings with the slip on brass ring that may work. SharkBite fittings replace all other methods when working with copper and they work even when there is water in the line. Simply cut the pipe and push on the connector. Great in older homes and hard to reach places.
Scritto da: T Nielson
false advertising
It said it was a pack of 6, I only got 1
Scritto da: Synonymous
Working great so far
Used these on a hot water tank and they've been tight and dry for more than a year. Make sure you have no tension on the joint and the connection is straight. Recommended.
Scritto da: Mountain man.
Slips on easily and no leaks
Had to reduce 1 1/4” pex to 1”. Used the 11/4” shark bite with a reducer adapter on the end.
Scritto da: Super Dave
Works great, very long delivery time
First time using shark bite and I am thoroughly impressed. Easy fast and leak free. I’m selling my propane torch
Scritto da: Debashis Dey
New age fittings
Check Sharkbite fitting on the net and you would know how they can make your life easier for plumbing. This are all push type fittings and we use it extensively all across with CPVC pipes.
Scritto da: claude
exellent
who ever invented these should be made king

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array