Sengled Zigbee Smart Light Strip 1m/3ft Extension No Plug, Voice Compatible with Alexa, Google Assistant and SmartThings, 2m/6.56ft Base Lightstrip Required, White 1 m/3.28 ft Extension Zigbee Light Strip

Brand:Sengled

3.4/5

lv
81.09

Правете повече с вашето осветление. Трансформирайте вашето пространство с едно докосване в приложението или проста гласова команда. Интелигентните светодиоди Sengled се вписват безпроблемно във вашия съществуващ интелигентен дом. Съвместим с Alexa и Google Assistant, лесно е да добавите интелигентно осветление във всяка стая. Създавайте сцени, задавайте графици, затъмнявайте или осветявайте и още с приложението Sengled Home (iOS/Android). С над 16 милиона цвята и регулируеми бели нюанси, от които да избирате, вашите светлини могат да създават настроение за всичко - от уютни филмови вечери до парти настроение.

Безопасна за употреба: Повърхността на LED светлинната лента alexa е направена от гъвкав и безопасен материал, който действа като защитен слой за светодиодите, намалявайки вероятността от повреда от външни предмети, ефективно водоустойчив и по-безопасен за използване. Интелигентна многофункционалност: Работи с Alexa и Google Assistant, лесно контролира включване/изключване на интелигентната светлинна лента, регулира яркостта или променя цветовете с гласова команда. 27 съществуващи режима и повече потребителски режими, от които да избирате. Функцията за график ви помага да контролирате по-добре rgbw led лентата. Стабилна регионална мрежа: LED лентата Sengled ZigBee се свързва към интернет през Ethernet (2,4 или 5 GHz рутер), използвайки протокола ZigBee, за да осигури по-стабилни връзки. До 64 ZigBee продукта могат да бъдат свързани чрез Sengled Hub, подходящ за повечето смарт устройства с вграден Hub (ZigBee протокол). Необходим е хъб (продава се отделно): лентовите светлини Sengled Zigbee са съвместими с вградения хъб на Amazon Echo, SmartThings, Wink, Hubitat или Sengled Hub, не са съвместими с мостовата система Philips Hue или други хъбове. Интелигентният хъб Sengled трябва да бъде свързан към вашия домашен рутер с Ethernet кабел. Висока яркост и наситеност: 16 милиона цвята и хиляди чисти, ярки бели, от които да избирате, еквивалент на 1000 лумена CRI>80. Интелигентните светодиодни ленти, използващи технологията zigbee, ще бъдат много по-ярки от wifi и bluetooth технологията, която независимо от настройката осветява добре без измиване или значително изместване на цветовете, добре наситени и по-ярки. 6,56 фута основни удължители на комплекта: Можете да добавите до 8 Sengled 3,28 фута zigbee светлинни удължители, които са налични и напълно запазват функцията.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Sengled
Brand ‎Sengled
Bulb Base ‎E26
Color Purple
Color ‎Purple
Color Temperature ‎6500 Kelvin
Connectivity Protocol ‎Zigbee
Connectivity Technology ‎Zigbee
Control Method ‎App
Controller Type ‎Voice Control
Country of Origin ‎China
Customer Reviews 4.3 4.3 out of 5 stars 960 ratings 4.3 out of 5 stars
Included Components ‎1 Smart LED Light Strip
Indoor/Outdoor Usage Indoor
Indoor/Outdoor Usage ‎Indoor
Item model number ‎E1G-G8E
Item Package Quantity ‎1
Item Weight ‎2.39 ounces
Light Color Multicolor
Light Color ‎Multicolor
Light Source Type LED
Light Source Type ‎LED
Luminous Flux ‎1400 Lumen
Manufacturer ‎Sengled
Material ‎Plastic
Number of Items ‎1
Number of Light Sources ‎150
Occasion Christmas
Occasion ‎Christmas
Package Dimensions ‎7.2 x 3.39 x 1.3 inches
Part Number ‎19010214
Power Source Corded Electric
Power Source ‎Corded Electric
Shape ‎Curved
Size ‎1 m/3.28 ft Extension
Special Feature Tunable White 2000-6500K, Dimmable, Schedule Setting, Works with Alexa Google Assistant, Color Changing See more
Special Feature ‎Tunable White 2000-6500K, Dimmable, Schedule Setting, Works with Alexa Google Assistant, Color Changing
Special Features ‎Tunable White 2000-6500K, Dimmable, Schedule Setting, Works with Alexa Google Assistant, Color Changing
Style Zigbee Light Strip
Style ‎Zigbee Light Strip
Theme Indoor
Theme ‎Indoor
Warranty Description ‎3 years.
Wattage ‎18 watts

3.4

8 Review
5 Star
67
4 Star
18
3 Star
7
2 Star
2
1 Star
7

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Involved
Under Cabinet Lighting! Easy project that you can do on your own
Get ready to earn brownie points with the wife... This project was very easy to do and adds another dimension to your kitchen. I chose these light strips due to: 1. They integrate into my smart home solution 2. Can easily change the color of the strip to millions of different colors (match the ceiling light color (warm/soft/white/cool/daylight), change colors for the holidays, change to a certain % during different times of day (e.g. 50% light at 10pm, 25% light at 1am), etc...) 3. Can cut or add to the length of the strip to fit your dimensions 4. Has a individual controller that has a button that you can manually turn on/off if needed each light strip 5. Cheaper than other name brand smart light strips 6. Fits nicely into aluminum tracks with diffuser. As you can see in my pictures, I installed two lightstrip bases to bridge the gap on either side of the microwave. Most people have an outlet above the microwave so I just bought a outlet adapter that fit two lightstrip base plugs. I drilled holes in the cabinets and ran the Sengled wires through the cabinets up to to the outlet. I also used aluminum tracks with diffusers to minimize the hotspots. This light strip will fit just barely into the track but if you push it in, it keeps it snug in place. Note: once you push it in, it is very difficult pulling it out without destroying the strip. Make sure you do all of your measurements before you secure the light strip into the track. You can find that material here: (https://www.amazon.com/gp/product/B01IY1L2B2/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1) (https://www.amazon.com/gp/product/B06XXHKC4Z/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1) You will also notice that I had dividers between my cabinets that I had to cut through. I used a hack saw to cut up from the bottom to the base of the cabinet. I then used a dremel with a 1/2" wood cutting disc to cut out the horizontal piece. I have my light strips integrated with my smart home environment (Sengled, Alexa, Philips Hue, SmartThings). I added a Hue motion sensor to the kitchen so the lights turn on/off with motion/schedules using alexa routines. For example, Lights turn on at 50% at 6am, when motion is detected they turn on to 100%. When no motion is detected it drops back down to 50%. I have multiple routines setup like this throughout the time of day depending on how much light is needed. Obviously at 1am you don't want to be blinded by 100% light. I've seen a lot of people, including myself, trying to solve a few known issues. 1. Q: How to gap the microwave? A: I was unable to find any viable adapters to run a non-lighted distance. I also didn't want to deal with trying to solder anything. Buy two lightstrip bases and treat them as two separate installs. Group them together in the Sengled app so they act as one. 2. Q: How do you make a 90 degree turn? A: There's no special trick to making a 90 degree turn. The light strip will not lay flat about 4 inches in either direction. Just turn the strip sideways about 4 inches on both sides of the 90 degree turn. With the aluminum track with diffuser, you will not notice light loss. (see my corner pictures). 3. Q: there's hot spots with this light strip. A: use deep depth aluminum tracks with diffuser. The deeper the track, the less hotspots you will have. The tracks linked above worked really well for me. 4. Q: I don't have a smart home and want to control the lights. A: you can control the lights using the Sengled App or buying a $20 sengled switch that can be attached anywhere with no wiring required: https://www.amazon.com/Sengled-Smart-Light-Switch-Required/dp/B07QHDV5S4 For this project, you will need a 1. dremel with a metal/wood cutting disc. (cutting aluminum tracks/wood dividers under cabinet) 2. drill with 1/2 drill bit 3. hacksaw (if you have cabinet dividers underneath that you need to cut through) 4. Outlet adapter (if running multiple base plugins) 5. Tape measure 6. Scissors (cutting light strip / plastic diffuser) 7. Marker/pencil for marking measurements I have spent years trying to figure out how to add under cabinet lighting without spending $1000s+ on an electrician/materials. As long as you have an outlet accessible and are semi handy, you can do this. Hope this information helps!
Scritto da: E Reed
Another great LED strip and remote switch from Sengled
I have LED's everywhere, under cabinets, closets, etc. I'm running out of smart home projects and saw a Youtube video of someone putting LED strips under their bed. Ok, I'll give it a try. I have a 4 poster wood frame bed, I ran the strips under the outside edge all the way around and behind the headboard. I have them come on with my evening routines and setup a button on each nightstand to control them. I thought this was kind of a frivolous project, but it turned out to be very functional. I have them setup so that if you use the button in the middle of the night to navigate the bedroom, they come on very softly so not to wake the other person in bed sleeping. Then after a couple of minutes they automatically turn back off again. I also have them setup in my evening light routines and they work flawlessly. The wireless switch/dimmer that came with the kit was a bonus. I have an entry in my kitchen with no switch for the ceiling light and I used this to create a 3-way light without having to wire it. I set it up in SmartThings with the smart lighting app to mirror another switch. I had it mirror the smart light switch I have on the other side of the room and it works great. The dimmer function works great too. It mounts right to the wall and almost looks like a Decora style switch, same outside dimensions. I've added a picture of the two switches I use in my kitchen. I wish the logo wasn't so pronounced the the remote frame, but it works and it's intuitive to use. You can buy the remote switch separately for about $20, so the fact that it comes with the LED kit was a bonus. The kit also came with a Sengled hub. This is necessary if you don't already have a zigbee hub of some kind. I already have SmartThings and have my other Sengled bulbs and strips tied directly to my SmartThings hub, so this was an extra device I can't use, but if this was someone's first venture into a smart home ecosystem, it would be a great place to start. Follow up entry. I still like the strip but the remote switch started eating batteries. I was literally changing the battery every day. I contacted Sengled as it was under warranty and they took all the info about the switch. I gave up and ordered a Zooz switch. This is a much better switch functionally and aesthetically. I've yet to replace the battery and it works great. Cut to the chase... 3 months later I get the replacement... It's an led strip, not a switch. I used it in anther location, glad I didn't wait for the switch. The Zooz switch works so well I bought another just for scene control in another room.
Scritto da: Byron
Very good strip for ZigBee control
Looked for a ZigBee compatible strip and found this one. Works well with home assistant and is quite bright (has a dedicated white led and separate RGB led). One thing is that the strip is a bit short, I think it is a bit pricey but you get pretty good quality for it imo
Scritto da: H
Ok lights
They are ok I do like the philips hue better. These are cheaper and you can tell. It's not that they are bad, just not as good a Hue.
Scritto da: Amazon Customer
Perfect when hooked up to my smart hub
The App is amazing. So many options and super easy.
Scritto da: Jason R
Disappointed
Bought this light strip two years ago. Very minimal usage. Only half of the lights work as of last week. Support ended two weeks ago. I'm usually happy with sengled products but this is very disappointing.
Scritto da: Mike Clement
Great Light strip
Great product ! Great Colors .
Scritto da: Florian Wilhelm
Not compatible with Philips Hue Bridge
Do not buy this light strip if you already have the Philips Hue ecosystem. The light strip is NOT compatible with the Philips Hue bridge, even though it says "Zigbee compatible" on the box. Sengled uses a different Zigbee standard, which makes your choice of Hub rather difficult. I'm already set up with a Philips Hue Bridge. I never had problems before adding third-party Zigbee smart devices. Sengled is the first one that I encountered that says Zigbee on the box but doesn't work with Hue. I returned the item because the incompatibility rendered it useless for me. To be fair: if you don't have (and don't want) Philips Hue in your home then Sengled might be fine if you stick to their hubs and bulbs.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array