Segal SE 27600 Ключалка за вдлъбнатина, 2-1/2 инча задна част, кован масивен месинг, сатениран никел, сатениран никел, дясна ръка

Brand:Segal

3/5

lv
350.17

Тези издръжливи входни входни комплекти брави са изработени от различни материали и се предлагат в сатенирано никелово покритие. Те са предназначени за използване на външни входни врати, проектирани да съответстват на старинния обков, използван на вътрешните врати, без да застрашават сигурността на вашия дом. Тези комплекти ключалки за сигурност могат да бъдат монтирани на входни врати с дебелина от 1-3/8 инча до 1-3/4 инча и със заключващите цилиндри за шпонков канал Segal, представени в тези комплекти брави Mortise, заедно с издръжливата конструкция на вътрешния корпус и компоненти, можете да се насладите на красотата на ретро хардуера на Yesterdayft.s със силата на съвременния хардуер за сигурност. Дръжките на тези комплекти брави са изработени от ляти под налягане и подсилени стоманени компоненти и са завършени с красиво ковано, масивно, полирано месингово покритие. Масивната месингова вътрешна декоративна плоча е с по-малък размер от външната декоративна плоча и включва навигационен превключвател за задействане на функцията на външното копче. Той е с размери 2-1/4 инча. Широк на 7 инча. Висок, със стоманена подсилена задна плоча в областта на копчето. Центровете на монтажния отвор за вътрешната декоративна плоча са с размери 1-1/8 инча. Широчина x 5-15/16 инча, център до център. Външната облицовъчна плоча е с размери 2-3/4 инча Широчина x 10 инча Височина, а центровете на монтажните отвори са разположени на 1-13/32 инча на 8-3/4 инча в центъра. Копчето и цилиндърът на ключа са монтирани през външната декоративна плоча. Този комплект брави включва 1/8 инча дебела закрепваща плоча, където резето и резето влизат в един и същ правоъгълен отвор, с монтажни отвори, разположени на 4-D/8 инча. Включена е и сива пластмасова кутия за прах за монтаж под закрепващата плоча. Като функция за повишена сигурност, този комплект за заключване разполага със система с копчета с разделен шпиндел, предназначена да предотврати нарушаване на хардуера от външната страна на вратата. Половината на шпиндела с вътрешна резба и напречен щифт се вмъква от външната страна, докато половината на шпиндела с мъжка резба се вмъква от вътрешната страна на вратата. Копчетата се закрепват към частите на шпиндела с фиксиращите винтове, намиращи се на всеки вал на копчето. Въпреки че ръкохватките на тези комплекти ключалки са обратими (включени са инструкции), има подходящи комплекти ключалки с резета с противоположни ръце, готови за инсталиране. Подробни, лесни за следване инструкции за монтаж са включени към всеки входен входен комплект ключалка.

5-1/4 инча височина и 3-3/8 инча ширина. Всички монтажни крепежни елементи са включени към всеки входен комплект ключалка. Стоманено подсилените копчета включват конструкция от кован масивен месинг (с покритие от сатениран никел), масивни месингови декоративни плочи и лицева плоча (също с покритие от сатениран никел), стоманен щифт с корпус Zamak. Сатенирано никелово покритие. 2-1/2 инча. Задна част, 1-1/16 инча X 7-5/8 инча лицева плоча, 9/16 инча проекция на резето, 1 инча проекция на резето, копчета с диаметър 2-1/4. Този ключалка с дясна ръка може да се използва на входни врати с дебелина от 1-3/8 инча до 1-3/4 инча, за да съответства на вътрешния хардуер във винтидж стил.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Segal
Brand ‎Segal
Color ‎Satin Nickel
Country of Origin ‎China
Customer Reviews 3.9 3.9 out of 5 stars 183 ratings 3.9 out of 5 stars
Finish ‎Polished
Finish Type ‎Polished
Handle Material ‎Alloy Steel, Brass
Included Components ‎Entry Door Mortise Lockset
Item Dimensions LxWxH 1 x 3.5 x 11 inches
Item Dimensions LxWxH ‎1 x 3.5 x 11 inches
Item model number ‎9086637
Item Package Quantity ‎1
Item Weight ‎4.26 pounds
Item Weight ‎4.3 Pounds
Lock Type Key Lock
Lock Type ‎Key Lock
Manufacturer ‎Prime-Line Products
Material Brass, Nickel, Steel
Material ‎Brass, Nickel, Steel
Number Of Pieces ‎2
Part Number ‎SE 27600
Product Dimensions ‎1 x 3.5 x 11 inches
Shape ‎Rectangular
Size ‎1 Pack
Style Right-Handed
Style ‎Right-Handed

3

8 Review
5 Star
55
4 Star
15
3 Star
11
2 Star
7
1 Star
12

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Mark newell
Awesome replacement for Mortise-style lock for older houses.
My older Russwin brand mortise lock had worn out (house was built in 1941) and it used a non-standard key (could not make a copy anywhere local). Locksmiths all quoted ridiculous prices to replace my existing lock (several hundred dollars). Replacing the door was even more money (several thousand dollars). I took my old one out, measured it, and was able to find its replacement for a fraction of what the local locksmiths wanted. (Thank you Amazon!) Its very sturdy and well made (its heavy --- very solid construction), has a nice finish, and was a simple drop-in replacement for my door. Please be aware that all mortise-style locks are not physically identical for thickness/offsets/etc. I had to take my old one out of the door, measure everything (lock depth/height/offsets/etc) and then find a brand and model that matched. If you don't do this, you will be unhappy when the new one does not fit... I am very happy with my purchase and recommend this brand.
Scritto da: C. Silva
Direct replacement for my old door
Fit directly in my old door slot and it's good for the money and easy to install, but the screw on the door knob constantly unscrews itself and has to be retightened. Also, would be nice to have a key number to have matching keys for the rear door as well, which is not provided.
Scritto da: Clifton Park, NY customer
Door may be just a little too thick for this lock set.
It was a bit difficult. Door might have been a little too thick. We finally barely got the barrel to screw in and then it s didn’t quite work right. We left it in because it was better than a hole in the door for the time being. Basically just acts like a prop.
Scritto da: MdGlamDesigns
Great Value
This is a great value. Other metal set costs $350+. This aligned perfectly with the existing strike plate and mortise opening. I had to make slight modifications with a wood chisel. After finally figuring out how to unscrew and remove the old set, remove the key lock from the new set, installation was a breeze! Please note that the plate is made of thin metal (likely aluminum) but all other pieces are heavy metal and very sturdy. This set is interchangeable for right-hand or left-hand door. Directions were easy to follow with diagrams and instructions in various languages.
Scritto da: MaryFlorida
Set screws back out knob unscrews off
The set screws back out and the knob unscrews all the way off, and people can get stuck inside the room unless they have a screwdriver or something handy to push the latch so it opens
Scritto da: amazon_princess
Door is just a bit too thick for this lock
Like another reviewer, I need to replace a mortise lock for want of a thumb-turn on an ancient door. This set was nearly a match-- the knob, lock & thumb-turn holes all lined up fine. But the door itself is just a bit too thick, so that it was not possible to install the cylinder using the exterior face-plates given, so I returned it. The old lock had nearly flat face-plates. Otherwise, it seems like a decent consumer-grade lock-set. Not commerical-quality, but it's not priced for that either so OK. I'd have kept it if it fit.
Scritto da: Bret A. Scott
Nicely built lockset, and relatively easy to install
I've owned my house for 8 years, and it hadn't occurred to me until a few days ago to figure out the kind of lock set that was intended for an exterior storage door missing its locks. Amazon led me towards mortise lock sets, and with a few measurements, to this particular model. I was able to "mostly" install it within an hour, and completely install it in less than 2 hours. Installation was sped up by the purchase of an uncut key blank at Lowe's, which I used as something to grasp to screw the lock cylinder in to the lock body. All of the necessary screws and gaskets were in the package, and if replacing a similar piece, a Phillips screwdriver may be the only tool you'll need. Lock operation is smooth, and it's good to know that spare keys can be made easily. I'll say appearance is a 7 out of 10... quite nice for its price point, but not a substitute for Baldwin or other premium mortise sets.
Scritto da: Johnathon K.
Knob set screws backing out
I liked I found a combo of a mortise door handle with the lock of a modern door would give a higher rating but the 2 of the 4 set screws for the know would keep coming loose no matter how much I've tighten them down.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array