Rain Bird ET/1PK25S Инструмент за инсталиране и премахване на емитер за капково напояване Комбиниран инструмент за монтаж/емитер - Инсталиране/Премахване

Brand:Rain Bird

3.4/5

lv
53.54

ОПИСАНИЕ НА ПРОДУКТА Инструмент за инсталиране и премахване на емитер за капково напояване Rain Bird ET/1PK25S. Удобен многофункционален инструмент пробива 1/2” капкова тръба и монтира Rain Bird капкообразуващи/емитери или 1/4” фитинги с едно бързо действие. Бързо монтира или демонтира излъчватели за точково напояване Rain Bird, 1/4” фитинги с бодли и 1/4” тапи за тръби. Просто поставете емитер или фитинг в специализиран отвор в края на инструмента; натиснете бодливата точка в страничната стена на 1/2 тръба. Издърпайте инструмента, оставяйки емитера или фитинга вграден в тръбата. Вече сте готови да плъзнете 1/4 тръба върху вашия инсталиран излъчвател или фитинг. **Съвет за инсталиране: за най-лесно проникване на 1/2 капкова тръба, използвайте леко въртеливо движение, когато поставяте бодливи 1/4 излъчватели или фитинги. Тази техника намалява необходимата сила надолу, предотвратявайки сплескването на тръбите, което може да причини проникване през противоположната страна. За да премахнете емитери или фитинги, използвайте прореза отстрани на инструмента. За да вмъкнете тапи, за да запечатате отвори в 1/2 капкова тръба, използвайте по-големия отвор, разположен в края на дръжката на Emitter Tool. Тапите Rain Bird имат малки ръбове, за да ги държат здраво в инструмента; тези ръбове се сплескват леко, когато щепселът е поставен, позволявайки лесно разгръщане в тръбите. Силно видимият лилав цвят позволява инструментът да се вижда лесно в трева, почва, кора, мулч и др. Rain Bird „Интелигентното използване на водата“. ОТ ПРОИЗВОДИТЕЛЯ Rain Bird Corporation е частна компания, основана през 1933 г. по време на селскостопанския бум в Калифорния. Ние сме признати за производител №1 и доставчик на продукти и услуги за напояване в света. С търговски офиси по целия свят; ние предлагаме над 4000 водоспестяващи продукта за напояване в повече от 130 страни. От самото начало Rain Bird произвежда и предлага най-широката гама от висококачествени продукти за напояване в индустрията за: ферми, голф игрища, спортни арени, търговски обекти и домове. През последните 80 години Rain Bird е получил повече от 450 патента по целия свят. Включително първия за напояване през 1935 г. на нашия оригинален спринклер с ударно задвижване (Патент на САЩ #1,997,901), който направи революция в производството на селскостопански храни и постави началото на нова ера в напояването в световен мащаб. През 1990 г. тази оригинална ударна пръскачка е определена като историческа забележителност от Американското дружество на селскостопанските инженери. Нашите продукти покриват всички аспекти на напояването… таймери/контролери, изскачащи въртящи се спринклери, изскачащи спринклери със спрей глави, спринклерни дюзи, напоителни клапани, капково напояване, дренаж и много други. Тези продукти са избрани и инсталирани по целия свят в най-големите и престижни проекти за напояване на жилищни, търговски, селскостопански и голф игрища. Rain Bird се ангажира с Интелигентното използване на водата™, което се простира отвъд продуктите до образование, обучение и услуги за индустрията и общността. Нашето наследство е да проектираме и произвеждаме само продукти с най-висока стойност и качество. Благодарни сме, че получихме множество награди за признание от много от нашите ценени партньори. Rain Bird „Интелигентното използване на водата

Силно видимият лилав цвят позволява инструментът да се вижда лесно в трева, почва и мулч/кора. Дупката в горната част на дръжката монтира тапи за запечатване на дупки в 1/2 тръба. Прорезът отстрани позволява лесно отстраняване на фитинги, емитери и щепсели. За по-лесно инсталиране на емитери и 1/4 фитинги в 1/2 тръби използвайте леко усукване при поставяне. Осигурява лесно прилагане в една стъпка на капкообразуватели/излъчватели Rain Bird, 1/4 фитинги и тръбни тапи. Бързо монтира и демонтира капкообразуватели/излъчватели Rain Bird, 1/4 бодливи фитинги и тапи за тръби.
Country of Origin Mexico
Customer Reviews 4.4 4.4 out of 5 stars 1,442 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer No
Item model number ET/1PK25S2
Item Weight 0.009 ounces
Manufacturer Rain Bird
Product Dimensions 1 x 0.63 x 1.58 inches

3.4

13 Review
5 Star
69
4 Star
14
3 Star
8
2 Star
3
1 Star
6

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Sandra
made my job easier
it made my job easier
Scritto da: Angel Douglas
Very small so dont lose it, worked good for what It was needed for
I only worry about losing this, but i put it on a key ring and will be fine. Worked like a charm to make smaller to larger holes in seconds. I needed this exact tool for the job.
Scritto da: JS
Slow shipping.
Works great
Scritto da: Bàká Hään
Useful tool
We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this tool in order to push the barbed end of the emitters into the 1/2 in tubing. + Good price. + Very easy to use. Snap the colored side of the emitter into the middle of this tool. Then use the leverage of the tool to push the black barbed end of the emitter into the hole you punched into the 1/2 in tubing. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.
Scritto da: Bàká Hään
Useful tool
We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings. + Good price. + Very easy to use. Use this to flare the ends of the 1/2 in tubing. Then snap the fitting into the tool and use it to push the tubing onto the barbed end of the Tee or Elbow. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.
Scritto da: Flamsteed
I needed his
I had been using a heat gun to soften the tubing end before inserting the fittings This tool works and makes the job so much easier…and I don’t have to run an extension cord.
Scritto da: JNK
Blade works great, hole punch not so much
The blade part works great for cutting irrigation hose (I've used it on both 1/2 and 1/4 inch to equal effect), but that's not really hard as any scissors would do the same. I mostly got this to have the cutting and hole punching on one tool, but unfortunately, I have yet to have the hole punch work well. Perhaps I'm not doing it right, but if so, then how this should be used must be very convoluted.
Scritto da: Saeng Fio Chao
Great handy tool
With all others tool, I find this is the best one
Scritto da: Ed
Don't forget the tool!
I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.
Scritto da: Annette Dreger
Very easy to use
Worked as excepted--makes nice straight cuts and proper sized holes for the barbs!!
Scritto da: Amazon Customer
retour imposible
J'ai voulu le retourner car il venait déjà avec le kit rainbird mais le vendeur il ne voulait aucun retour de cette item
Scritto da: DP Kindle Customer
It works!!
Love!! It works giving you more leverage to insert the tiny barbed connector and emitters!! Saves my fingers, well worth the price!!
Scritto da: rferraro
Product description is misleading
I bought this tool to use with 1/4 barbed fittings as is indicated in the amazon.ca description. The barbed fitting end DOES NOT fit into the hole so that you can insert the other barbed end into the hose. I'd like to return it bit this item is not returnable for some reason. Useless for me....

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array