Rain Bird BE50/4PK капково напояване Универсален бодлив колянов фитинг, подходящ за всички размери 5/8, 1/2, .700 капкови тръби, 4 пакета

Brand:Rain Bird

3.7/5

lv
47.91

ОПИСАНИЕ НА ПРОДУКТА Rain Bird BE50/4PKS капково напояване Универсален колянов фитинг с бодли, пасва на всички размери 5/8, 1/2, .700 капкови тръби, 4 пакета. Това универсално коляно с бодли е предназначено за бързо и лесно свързване на две дължини на 1/2 капкова тръба в L-образна форма. Висококачествените накрайници грабват всички марки 5/8, 1/2 и .700 капкови тръби, създавайки бърза, сигурна, устойчива на течове връзка, която остава на място сезон след сезон. Перфектният избор за ремонт или удължаване на тръби в система за капково напояване. Уникалният дизайн на шипове намалява силата на вкарване и естественият цвят се смесва добре с всички земни тонове. Изработен от изключително издръжливи материали, устойчиви на UV и химикали, за да се осигури дълъг живот. Препоръчително работно налягане: 0 до 50 psi. Удобната найлонова торбичка съдържа (4) лакътя. Rain Bird Интелигентното използване на водата. ОТ ПРОИЗВОДИТЕЛЯ Rain Bird Corporation е частна компания, основана през 1933 г. по време на селскостопанския бум в Калифорния. Ние сме признати за производител №1 и доставчик на продукти и услуги за напояване в света. С търговски офиси по целия свят; ние предлагаме над 4000 водоспестяващи продукта за напояване в повече от 130 страни. От самото начало Rain Bird произвежда и предлага най-широката гама от висококачествени продукти за напояване в индустрията за: ферми, голф игрища, спортни арени, търговски обекти и домове. През последните 80 години Rain Bird е получил повече от 450 патента по целия свят. Включително първия за напояване през 1935 г. на нашия оригинален спринклер с ударно задвижване (Патент на САЩ #1,997,901), който направи революция в производството на селскостопански храни и постави началото на нова ера в напояването в световен мащаб. През 1990 г. тази оригинална ударна пръскачка е определена като историческа забележителност от Американското дружество на селскостопанските инженери. Нашите продукти покриват всички аспекти на напояването… таймери/контролери, изскачащи въртящи се спринклери, изскачащи спринклери със спрей глави, спринклерни дюзи, напоителни клапани, капково напояване, дренаж и много други. Тези продукти са избрани и инсталирани по целия свят в най-големите и престижни проекти за напояване на жилищни, търговски, селскостопански и голф игрища. Rain Bird се ангажира с Интелигентното използване на водата™, което се простира отвъд продуктите до образование, обучение и услуги за индустрията и общността. Нашето наследство е да проектираме и произвеждаме само продукти с най-висока стойност и качество. Благодарни сме, че получихме множество награди за признание от много от нашите ценени партньори. Rain Bird „Интелигентното използване на водата

Опаковка от 4 броя 1/2 конектори с шипове в удобна найлонова торбичка. Препоръчва се за работно налягане от 0 до 50 psi. Изработен от изключително издръжливи материали, устойчиви на UV и химикали, за да се осигури дълъг живот. Съвместим с всички 1/2 тръби за капково напояване с външен диаметър от .580 до .700. Позволява създаване на персонализирано оформление за вашата зона за засаждане. Заострените краища захващат тръбата за сигурна непропусклива връзка. Съединител за използване с тръби за капково напояване 1/2 и 5/8.
Country of Origin Mexico
Customer Reviews 4.6 4.6 out of 5 stars 3,592 ratings 4.6 out of 5 stars
Department Teak
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item model number BE50/4PKS
Item Weight 0.104 ounces
Manufacturer Rain Bird
Product Dimensions 0.9 x 0.9 x 2.15 inches

3.7

13 Review
5 Star
77
4 Star
15
3 Star
5
2 Star
1
1 Star
2

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Reed Lloyd
Easy to install
This 1/2 inch Tee connector works better than most of my previous purchases and best price, too. It is much easier to install as well. Be sure to give yourself a little longer tubing at the joint to secure the installation. Recommend it.
Scritto da: Howard
Just what I needed
I brought our old hydroponic drip system back to life. This valve helped make things easy, allowing me to control the drip to just the flow I wanted.
Scritto da: JCKS
Work perfectly
These are fantastic. They do not leak after 2 years. No deterioration, no leakage.
Scritto da: Jan
Works Great
Easy to use ends the soaker line.
Scritto da: Dan
Only Rainbird products for me
Added to vegetable beds so I could turn on water only for actively growing beds. Also able to dial volume of water for the drip lines.
Scritto da: jweit
good for what I needed
Used to control water flow for flushing heater core while using the flushing tool.
Scritto da: Chris
Great for regulating fountain flow.
I bought a wall-hanging fountain that has an issue. The water, which comes out in 3 streams, is too strong causing splashing and noise. After several failed attempts to fix it, I thought of slowing down the water. I bought some 1/2" flexible tubing at Home Depot and this valve. I cut a piece of the tubing and installed the valve between the pump and fountain intake tube. After adjusting the valve to slow the flow, it worked pretty well. Now I'm happy.
Scritto da: J. Starmer
Drip Irrigation Project!
This review is for a variety of products all in one. This spring (2013) my wife and I put in 2 4'x20' raised bed gardens in the back yard for growing flowers and veggies. We live in Tennessee and the middle of the summer is hot and dry. I wanted a way to keep the plants watered and decided to convert a "spray zone" of our irrigation system to drip. I set up the garden with short rows that run the width of the boxes. I designed the garden with lots of short rows that run the 4' width of the boxes. Imagine a railroad track. The rails are the "feeder lines" that run the length of my setup, and the drip lines are the railroad ties that cut across the width of the garden (parallel with the rows of plants). I needed "feeder line" to bring the water to the drippers, and a variety of connectors to put it all together. I planned it all out on paper first, and then made sure I purchased enough parts. I purchased the following products for my setup: Rain Bird Landscape Dripline System 1/2-Inch Emitter Tubing With 18-Inch Spacing - 100-Foot Roll (5 stars) Rain Bird BT50-4PK Landscape Dripline System 1/2-Inch Barbed Tees, 4 Pack (5 stars) Rain Bird BE50-4PK 1/2-Inch Barbed Elbows (5 stars) Rain Bird EC50-Rain Bird GS50-10PK Landscape Dripline System 1/2-Inch Galvanized Wire Secures, 10-Pack (4 stars) 2PK Landscape Dripline System 1/2-Inch End Closure Fittings (5 stars) Rain Bird Landscape Dripline System Spray Head To Drip Connection Kit (5 stars) Rain Bird T63100-BULK 1/2-Inch 100-Feet Landscape Dripline System Blank Tubing Roll (5 stars) These parts were all high quality, and I am extremely pleased with the setup. I cut all the tubing to size and layed it all out prior to putting it all together. It is very difficult to fit the tubing over the barbs, but once on it stays in place and doesn't leak. My hands ached after putting a bunch of the tubing together, so I ended up using leather work gloves which made things go a lot better. A few things to note: 1) I don't have a rainbird setup, and this kit fit in great with my existing irrigation system. 2) The tubing is a bit stiff and can kink easily, but works very well, so be careful when connecting things. 3) The tubing and barbs are not the same inner diameter as stuff you can get at plumbing supply or home improvement centers. That means you can't mix and match, which is ok with me. 4) I used some teflon plumbers tape when attaching parts that screw in.
Scritto da: Ed
Simple and Effective
I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.
Scritto da: Jim Anderson
Works as it should
I lost the first one I bought last year, so I purchased the exact same one this year, as I liked how it works.. Not much to say about it , controls water flow off and on , and anywhere in between.. I used this between my water fountain pump and my water fountain, as the pump put out too much pressure , so I had to reduce it down for the proper flow.
Scritto da: iseeinblackandwhite
Works great to join my 1/2 inch tubing to my 5/8 inch tubing.
A bit of a tight fit on the 1/2 inch tubing but I heated the tubing slightly with a heat gun to make it a bit more pliable and it works great. A hair dryer would probably work too as you are just warming the tubing up slightly. These fittings are far superior to the fittings that go on the outside of the tubing. Happy with purchase.
Scritto da: Chad
To expensive
The product works fine. Double the price of other ones.
Scritto da: Amazon Customer
Fits nicely
Very good, tight, and easy to install into my 1/2 inch low pressure garden irrigation system. No leaks at all and very EASY to push into the tubing.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array