POWERTEC 70189 Прахоуловител Y-фитинг

Brand:POWERTEC

3.6/5

lv
98.69

Представяме ви Y-образния фитинг за събиране на прах от POWERTEC. Този истински фитинг тип "Y" действа като сплитер за събиране на прах и е специално проектиран да ви помогне да намалите от 6" порт (или главна линия) до 4 инча. Срещу 6-инчовия край, този заострен сплитер разполага с двойни 4-инчови маркучи - осигурявайки многофункционален инструмент, който увеличава работния процес, като същевременно ефективно побира множество подавания на маркучи. Независимо дали използвате този конектор с вашите вакуумни системи или преносими сервизни машини, той е проектиран да подобри въздушния поток и ефективността на вашата система. Освен това е създаден, за да осигури сигурна и надеждна връзка с вашите портове. Първокласно качество Нашият Y-образен фитинг 6x4x4 е изработен от черна, висококачествена ABS пластмаса. Този материал е направен за тежки приложения и предлага издръжливост с нетоксични характеристики. Неговата екологична конструкция го прави идеален за проекти на закрито и на открито и обикновено се използва от любители и професионални дърводелци по целия свят. POWERTEC е водещ производител на висококачествени дървообработващи инструменти и аксесоари, машини и асортимент от OEM резервни части. Ние се ангажираме да надхвърлим очакванията, като същевременно внасяме най-новите иновации, технологии и продуктови разработки в индустрията.

СПЕЦИФИКАЦИИ: 6-инчов номинален край е с 6-23/64-инчов външен диаметър и 6-инчов вътрешен диаметър. И двата 4-инчови номинални края са с външен диаметър 3-61/64-инча. и 3-23/32-инчов вътрешен диаметър – Не забравяйте да проверите интерфейса на вашите части за съвместимост на размера. Моля, обърнете внимание, че това не е проектирано да работи с график 40 или други графици на PVC тръби. PRO BUILD: Изработен от висококачествен ABS пластмасов материал, предназначен за здравина и издръжливост – Способен да издържа на прах, отломки и други абразиви, които обикновено причиняват износване. ХАРАКТЕРИСТИКИ: 6” отворът е женски порт и работи с 6” OD тръба или други мъжки портове. Двойни 4” OD портове за поставяне на маркучи за прахоуловители, тръби и инструменти като настолни триони, фуги, рендета и шлифовъчни машини. ФУНКЦИЯ: Този конектор с три отвора ви позволява да намалите от 6” порт (или главна линия) към 4 инчови разклонения. Може да се използва като резервен фитинг за прахоуловители, като POWERTEC DC1512 или устройства с подобен размер. ВКЛЮЧВА: (1) Фитинг за система за събиране на прах Y-тип.
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Brand ‎POWERTEC
Color Black
Color ‎Black
Connector Type Reducer
Connector Type ‎Reducer
Country of Origin ‎Taiwan
Customer Reviews 4.5 4.5 out of 5 stars 239 ratings 4.5 out of 5 stars
Exterior Finish ABS
Exterior Finish ‎ABS
Included Components ‎Fitting
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 7 x 6.2 x 10 inches
Item Dimensions LxWxH ‎7 x 6.2 x 10 inches
Item model number ‎70189
Item Package Quantity ‎1
Item Weight ‎13.6 ounces
Manufacturer ‎POWERTEC
Material Acrylonitrile Butadiene Styrene
Material ‎Acrylonitrile Butadiene Styrene
Measurement System ‎Inch
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎70189
Product Dimensions ‎7 x 6.2 x 10 inches
Size 6 x 4 x 4"
Size ‎6 x 4 x 4"
Style ‎6" to 4" fitting

3.6

9 Review
5 Star
75
4 Star
13
3 Star
7
2 Star
3
1 Star
2

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Anna
Useful product, but a bit too narrow
This splitter was perfect for my niche need to connect 3 fan outlets into 1 roof vent. At first I used box store fittings which was clunky and expensive. I threw my contraption out and used this splitter instead. But I fitted one ending to a 4" ABS pipe from the box store. The fit wasn't great - I had to use several thick layers of cement to enlarge this splitter. Other people mention that it splits down the middle to two halves. I can see how this can happen, the two halves are melted together. So I reinforced it with ABS cement.
Scritto da: Julien
Perfect solid hardware that is holding up well
Perfect solid hardware that is holding up well
Scritto da: TrailTrackers
This does work... With some work
You need "volume" to make this fitting function correctly. Notice my system goes from 8" to 6" to this fitting. Also note that I have this fitting inserted into a 6" Tee; roughly 1 1/2" penetration. Now then, to make this fitting work... I used my 5" random orbital sander with 60 grit paper and EVENLY sanded around the outside of the 6" end until it would go into the Tee. When I reached 1 1/2" penetration I switched to 120 grit to finish it off. I could have glued this into place, but I chose to use duct tape instead because at some point I'll be moving into a larger shop. edit: I should mention 2 more things. The time it took to sand this fitting to size was only 15 mins; nothing to speak of imho. Also, I liked the way this turned out so much I ordered another one, which I just got today. I will have that one installed tomorrow. ;-))
Scritto da: Sam H.
Thinner than I expected, but works
Does the job
Scritto da: Strat Man
Another tool in the battle against dust.
If you're trying to use this wye fitting with schedule 40 PVC pipe (which is *not* the same size as DWV pipe), you may want to consider using a 6" flexible coupling - it's a piece of cake. I used this Fernco unit (https://www.amazon.com/gp/product/B001AU6S8C/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) and no additional fiddling was needed for nice tight fit. As a bonus, it is a simple matter to adjust the orientation, if required.
Scritto da: nolan shinn
Great value
Did just what I needed at a fraction of the price of a comparable product from the original manufacturer
Scritto da: Atlanta customer
Dimensions are not accurate
The 4” ends are not actually 4”. They are smaller. This is important to me because smaller openings will cause pressure drop and reduced suction.
Scritto da: Hank W
Not a proper fit for my PSI dust collector
This y-fitting was a replacement for a broken fitting on my single stage PSI dust collector. The ID of the 6" portion was oversized, so I had to use black tape on the collector for a snug leak-free fit. Don't know if that is intentionally done by PowerTec or a flaw in manufacturing... but buyer beware.
Scritto da: dd
Great value
Using this "Y" for running two 4 inch bathroom fans to vent out one 6 inch wall vent.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array