0
0

Обща сума:lv 0.00

Вижте количкатаРазгледайте
LoginRegister
0

Обща сума:lv 0.00

Вижте количкатаРазгледайте
LoginRegister

PANAVISE 376 Самоцентрираща се, изключително широко отваряща се глава

Brand:Panavise

3.4/5

lv
204.40

Дължина на главата: 11,5 (292,1 мм). Височина (вал до върха на челюстните подложки): 5,25 (133,3 mm), Тегло: 1,9 lbs. (0,9 кг). Съвместим с всички бази от серия 300. Оребрените неопренови подложки за челюстите са 1,875 (47,6 mm) високи x 1,5 (38,1 mm) широки и осигуряват сигурен захват; обърнете подложките и широкото V държи кръгли или елипсовидни предмети. Чрез центриране на тежестта, тези глави за менгеме задържат дори по-големи и по-тежки предмети с лекота.

Няма налични единици

EAN: 0729315376005

Категории Наръчни средства и домашно обзавеждане, Електрически и ръчни инструменти, Части и аксесоари за електроинструменти, Стойки и подвижни основи,

Дължина на главата: 11,5 (292,1 мм). Височина (вал до върха на челюстните подложки): 5,25 (133,3 mm), Тегло: 1,9 lbs. (0,9 кг). Съвместим с всички бази от серия 300. Оребрените неопренови подложки за челюстите са 1,875 (47,6 mm) високи x 1,5 (38,1 mm) широки и осигуряват сигурен захват; обърнете подложките и широкото V държи кръгли или елипсовидни предмети. Чрез центриране на тежестта, тези глави за менгеме задържат дори по-големи и по-тежки предмети с лекота.
Brand Panavise
Color Black
Item Dimensions LxWxH 12.31 x 5.75 x 2 inches
Item Weight 1.9 Pounds
Material Neoprene
Style Round

3.4

10 Review
5 Star
69
4 Star
14
3 Star
7
2 Star
3
1 Star
7

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: MSgt GB
Handy but use caution when setting up
I’ll echo some other reviews… Be careful when you first get this, the flashing will cut you. The area where the post attaches got me and I was being careful. Next, what’s up with the regular screws? Panavise please catch up and supply phillips screws, and debur this thing before you ship it. Bumped down to 4 stars because of these issues. Now the positive. The 5/8 post does fit in my Lee Valley/Veritas carving vise if that matters to anyone. With the exception of the razor sharp flashing it is well made and very handy.
Scritto da: azfatboy
Works, but pricey and not nearly as easy to use as I had hoped
Bought this for locksport, as it seemed the de facto standard. Already had the base, so I was stuck getting just the head. I like this head a *little* better than the "standard" head I already had, but it's simply.not thay much better. It is super expensive for what you get. I even got it on sale and I still don't think it was worth it. If you are buying this for locksport, buy the combo that comes with the mobile base and this head. Buying this head separately, even on "sale", is expensive and not really a good value.
Scritto da: Bud Boggy
Dangerously Sharp Flashing - Poorly Finished - Unsafe Without Modification
I've wanted this vise for years and finally decided it was time to replace my 396 clamp. I was kinda excited to open the box, expecting another high-quality product from PanaVise, something properly finished and smoothly operating. Unfortunately, I received just the opposite! I never considered there would be sharp edges and a poor finish on this highly priced "Made in USA" tool. After picking up the new vise to examine it, I cut my finger on one of the several spots of flashing - sharp edges on the bottom left over from the molding process. The flash was extremely sharp, though thankfully not bad enough for stitches, and a minute or so with a Dremel tool and stone was all it took to smooth things out. I saw no sense in returning this for a new one (Why risk receiving something worse?), but in hindsight, I should have done so after also noticing how badly the lead screw binds. The binding is severe enough that it takes two hands to adjust the jaws - not good when one hand has to help steady the workpiece. Can't remove anything to try to fix it because the joints are all pinned. While I'm here: What's up with the oversized, archaic, flat-blade screws holding the jaws? I'm not going to use a dime or something other than a screwdriver to unscrew them, I'm at my workbench for crying or loud!
Scritto da: Saratogan
It’s functional
I use this for small to medium parts in woodworking, antique parts repair, or working on small metal parts. It is very functional for my use. The one concern I have is the “slop” in jaws as it moves along the threaded rods. If precision is a top criteria, this may be an issue, however.
Scritto da: 3DayPriest
Really? Slotted screws?
The item is exactly what I expected but it loses a star for Overall and Value because for something this nice I was expected hex-head screws to attach the heads. Nope, slotted. Really? SLOTTED. And even then they don’t appear to be stainless. Like putting bias-ply tires on a Porsche. Geez. Otherwise, a great vise. NOTE: Upon installation it was discovered that the slots are designed for a much, much larger than needed screwdriver. And when I went to buy some quality fasteners? Yep, non-metric. So inferior quality, inappropriately sized, non metric screws. My guess? Marketing was interfering with engineering. So this is definitely “Made in the USA”.
Scritto da: Tom T.
PanaVice Products are an Excellent Choice!
I have used these PanaVice products for decades, both at work and home. Their simple design ensures low probability of failure, and are just the right size for working on circuit boards, and finishing small sheet metal filing. They may be excellent for other jobs, but That is not what I use them for. I currently use 376 Self-Centering, Extra Wide Opening Head, 311 Bench Clamp Base Mount, 303 Standard Head, and 324 Electronic Work Center, and considering a tablet mount for my car.
Scritto da: Matthew Clark
Not the best for small circuit boards, but still a great tool
I bought this (along with a base, separately) to use primarily on my electronics workbench to hold circuit boards for soldering. I chose this one rather than a smaller one meant specifically for circuit boards because I like the idea of being able to hold boards of all sizes. However, I'm finding that the jaws are just a little wobbly, so trying to square-up on a smaller circuit board can be tricky. But hey, that might just be the nature of the beast, and I should have a smaller jaw for smaller circuit boards, so I won't blame this one. I do like the self-centering jaws, and how it can articulate to any angle or position on the base. Excellent tool!
Scritto da: Pauljs
A uniquely designed tool
This centering vise is unique in its design, and allows for the user to quickly grab odd shapes and have them balanced in it. The wide jaw opening is also a useful feature, making this tool a must have for DIY and those of us that restore vintage electronic equipment. I recommend you purchase a dedicated wide base for this tool instead of sharing it with other Panavise tools.
Scritto da: Chris G.
Great addition for your PanaVise
This is a nice addition to the PanaVise base. The jaws can be reversed for small items. The quality isn't grade A but good enough. Seems strong and durable just a little rough around the edges.
Scritto da: damon
Great little vice
Works awesome A bit over pruced but Works perfect for me.

Свързани продукти

hot
Bora Portamate PM-3500-Industrial Strength Универсална подвижна мобилна основа, която прави вашите най-тежки електрически инструменти лесни за преместване
3.5/5

lv 728.72

Bora Portamate PM-3500-Industrial Strength Универсална подвижна мобилна основа, която прави вашите най-тежки електрически инструменти лесни за преместване
3.5/5

lv 728.72

hot
BOSCH GTA500 Сгъваема стойка за 10-инчов преносим настолен трион (GTS1031), син
3.8/5

lv 447.42

BOSCH GTA500 Сгъваема стойка за 10-инчов преносим настолен трион (GTS1031), син
3.8/5

lv 447.42

hot
Мобилна база WEN, универсална тежка работа, капацитет от 500 паунда за инструменти и машини (MB500)
3.6/5

lv 292.96

Мобилна база WEN, универсална тежка работа, капацитет от 500 паунда за инструменти и машини (MB500)
3.6/5

lv 292.96

hot
Пазарувайте маса за инструменти Fox D2056, 13 x 23 черна
3.1/5

lv 338.96

Пазарувайте маса за инструменти Fox D2056, 13 x 23 черна
3.1/5

lv 338.96

hot
Регулируема универсална мобилна база Bora Portamate PM-1000. Преместете тежките си инструменти и оборудване из магазина си с лекота и стабилност
3.4/5

lv 290.49

Регулируема универсална мобилна база Bora Portamate PM-1000. Преместете тежките си инструменти и оборудване из магазина си с лекота и стабилност
3.4/5

lv 290.49

hot
PANAVISE 350 Многофункционален работен център 1
3.8/5

lv 363.20

PANAVISE 350 Многофункционален работен център 1
3.8/5

lv 363.20

hot
Преносима работна станция Rockwell RK9002 JawHorse Sheetmaster
3.7/5

lv 1780.25

Преносима работна станция Rockwell RK9002 JawHorse Sheetmaster
3.7/5

lv 1780.25

hot
BORA Portamate PM-5090 Регулируема поставка за подаваща ролка с 11-1/4 стоманена ролка със сачмени лагери
3.6/5

lv 246.59

BORA Portamate PM-5090 Регулируема поставка за подаваща ролка с 11-1/4 стоманена ролка със сачмени лагери
3.6/5

lv 246.59

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array

Обща сума:lv 0.00

Вижте количкатаРазгледайте

Категории

Всички категории
Меню Категории Близо до Количка

Menu