Оригинални части MTD 19A70041OEM 42-инчов комплект за мулчиране на трактори Подходящ за 2012 г. и след това, кафяв/A

Brand:MTD Genuine Parts

3.5/5

lv
239.26

Рециклирането на окосената трева обратно във вашата морава чрез мулчиране е един от най-добрите начини да гарантирате, че вашата морава получава правилните хранителни вещества, от които се нуждае, за да процъфтява. Комплектите за мулчиране с оригинални части MTD са проектирани и тествани за висока производителност въз основа на въздушния поток на режещия апарат, което позволява на косачката ефективно да разпръсне по-фините окосени треви. Седалката с нулево завъртане ще трябва да се завърти напред за видимост на етикета на списъка с части. Ножовете с остри ръбове режат тревата чисто и си проправят път през тревата по-ефективно, намалявайки общото време и усилия за косене. За да защитите инвестицията си, посочете и използвайте само оригинални части.

СУПЕРИОРНО ИЗПЪЛНЕНИЕ: Фабрично тестван и одобрен, за да осигури идеалното прилягане, здравина, издръжливост и производителност. КОМПЛЕКТ ЗА МУЛЧИРАНЕ: Съдържанието включва два ножа за мулчиране с 6-точкова звезда в централния отвор, една формована запушалка и крепежни елементи. ЧАСТИ ЗА ОРИГИНАЛНО ОБОРУДВАНЕ: Вижте етикета със списъка на частите под предния капак или под монтажната скоба на седалката с нулево завъртане за части от оригиналното оборудване. МОНТИРАНЕ НА МАРКАТА: Подходящо за ПОВЕЧЕТО, но не за всички косачки за трева Craftsman и Troy-Bilt и косачки с нулев оборот с 42-инчови режещи модули. СЪВМЕСТИМОСТ: Част от оригиналното оборудване за ножове за мулчиране, започващи с 942-0616, 742-0616, 942-04312 и 742-04312.
Country of Origin USA
Customer Reviews 4.4 4.4 out of 5 stars 1,031 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer No
Item model number 19A70041OEM
Item Weight 2.59 pounds
Manufacturer Arnold
Product Dimensions 26 x 5.25 x 4.25 inches

3.5

13 Review
5 Star
68
4 Star
19
3 Star
6
2 Star
3
1 Star
5

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: willie1934
OEM PARTS AT A GREAT PRICE.
This was easy to install and it fit perfectly.
Scritto da: Jay
Could be thicker
Purchased for my new Craftsman riding mower. The one on my older Craftsman, 24 years old, was about 3 times thicker.
Scritto da: Jeffrey Danko
The kit has everything you need.
Very easy installation. Perfect fit.
Scritto da: Robert
So far, so good
I received this today, and used it with my tractor and sweeper. It is a little tricky to put on, but now that it is on, it seems to work well. Since I have only used it ones, I can't really speak to the sturdiness of it, but so far so good.
Scritto da: G. Hise
Good OEM kit
Had never taken the lawn tractor apart so I wasn't sure what to expect. Most fasteners were clips so not much problem. I did not have a torque wrench to ensure the blade bolt was tightened within 80-100 psi as specified. Other than that, few issues. The directions require you to use the lawn tractor manual to take the lower carriage off the mower - good thing I still had it. The pictures were not in the instructions were not great. Would have appreciated an online link with actual photographs since I had never done it before. Line drawings just did not show enough detail. They show no drawing of the chute add-on in place, so it is hard to know when it is properly installed. The poor illustrations slowed me down such that it took about two hours to install this kit. Installation problems aside, I am very happy with how the lawn tractor now mulches the grass. No bagging, raking, and quicker cleanup around edges with a blower.
Scritto da: Mike
Pretty good.
Plug didn't fit right so I had to do some modifications , overall working fine now.
Scritto da: gary
It fits good
was a little slow getting here but it fits. Haven't used it yet but the way it fits it should work fine.
Scritto da: Nate
Works great but doesn’t fit perfectly
Does the job but the plastic cover doesn’t cover the deck fully. Leaves a gap that leaves a trail of trimmings.
Scritto da: Barry Algar
Blades do not fit a cub cacet 42" build date June 2022.
Blades did not fit. Received the 8 star center blades. My model is the 'bow-tie or sometimes referred to as the S', I did not return it because I needed the mulching plug. I will sell the blades myself. When I ordered, it said that it fits the 42" Cub Cadet. Lesson learned.
Scritto da: Alan Kabotoff
Mulching Kit Review
The kit was delivered as promised. I only needed the mulching plug as I had just installed new mulching blades so I have an extra pair. The mulching plug installation was not as simple as described. The front pin needed some manipulation to fit into the tab on the deck. Once installed and mowing, the plug didn’t completely shut down the flow of clipping but had acceptable performance.
Scritto da: Dennis
The pin on the cover doesn't fit properly.
Everything went well until l went to fit the metal pin of the plug cover into the hole of wheel bracket as per the instructions, it didn't fit properly. The pin has a bend in it which didn't allow the cover to go back far enough to fit on the bolt on the deck. It ended up I had to bend the pin out straight in order to get it to fit.
Scritto da: Christmas
Quick to install
Bought this for my 42 inch ride on mower. I only used the plug as I have good blades installed already. Very easy to install. Tested it out and it stayed in place and worked well.
Scritto da: Brian A.
Fits great.
Easy conversion kit.

Свързани продукти

hot
Нож за косачка Oregon 91-482
3.3/5

lv 123.07

Нож за косачка Oregon 91-482
3.3/5

lv 123.07

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array