Менгеме за инструменти Yost 250 2,5 със затягане, синьо

Brand:Yost Tools

2.9/5

lv
184.43

Менгеме за инструменти Yost 250 2,5 със затягане, синьо

Няма налични единици
ГАРАНЦИЯ: Предлага се с 1-годишна ограничена гаранция и 90-дневно връщане. ИНФОРМАЦИЯ ЗА БЕЗОПАСНОСТ: Неправилното използване на менгемета може да причини сериозно нараняване на очите, ръцете и/или други части на тялото. Менгеметата трябва да се настроят и използват правилно. Преди настройка и употреба прочетете, разберете и следвайте всички инструкции, посочени в ръководството. КАЧЕСТВО НА YOST VISES: Всеки инструмент Yost Vises е проектиран да има високи стандарти за качество, здравина и издръжливост. Ние ценим качеството пред количеството и произвеждаме продукти, които са безопасни и лесни за употреба. Ние предлагаме доживотна техническа поддръжка в подкрепа на нашата гаранция за качество. КАК ДА ИЗПОЛЗВАТЕ: Уверете се, че менгемето е здраво монтирано към работната маса и ключалката на въртящата се основа е сигурна. Отворете менгемето, като завъртите дръжката обратно на часовниковата стрелка. Поставете предмета между назъбените челюсти. Затворете менгемето, като завъртите дръжката на менгемето по посока на часовниковата стрелка, докато предметът застане плътно в назъбените челюсти, продължете да затягате, докато вече не можете да местите елемента. Не затягайте прекалено, тъй като това може да повреди елемента и/или менгемето. Когато приключите с работата по артикула, завъртете дръжката на винта обратно на часовниковата стрелка, за да освободите артикула. НАЙ-ДОБРАТА ИЗПОЛЗВАНЕ: Преносимите и закрепващи се менгемета се използват най-добре за леки метални или дървообработващи приложения. Тяхната функция за захващане, заедно с олекотен дизайн ги прави идеални за по-малки пространства, като например работен ван, или за транспортиране до различни обекти. ТЕХНИЧЕСКИ ХАРАКТЕРИСТИКИ: 2-1/2 (6,35 см) Ширина на челюстта на менгемето; Закрепва се върху пейки с дебелина 1/2 до 1-7/8 (0,5 - 4,32 cm); Дълбочина на гърлото 1,25 (3,175 см); Отвор на гърлото 2.25 (5.175cm). ПРЕНОСИМО МЕНГЕМЕ: 2,5-инчовото менгеме Yost Vises 250 е направено от отливки от сив чугун 30 000 PSI, заедно със стоманен винт и T-образна дръжка и стоманени двойни водещи пръти. Тази малка, но мощна скоба за менгеме осигурява преносимо практично затягане, заедно с подходяща здравина.
Brand Yost Tools
Color Blue
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 6 x 3 inches
Item model number 250
Item Weight 4 Pounds
Manufacturer Yost Vises
Material Iron
National Stock Number 5120-00-243-1372
Style Portable

2.9

11 Review
5 Star
52
4 Star
11
3 Star
10
2 Star
19
1 Star
8

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Moose
Grab a hold of one
Ya see what I did there? I crack myself up. It’s a nice little vise. Just understand what its limitations are. You’re not gonna clamp a 2x4 in it and pound away with a 2 pound sledgehammer. But use it for its intended purpose and you’ll be fine. And happy. I have two large sheds with a workbench in each. I like this little guy because I can easily move it between the two. It clamps nice and securely on the edge of a 2x6. Holds small items tightly. Smooth as silk operation. Excellent value. Made in the USA ???????? That’s pretty damn important to me I highly recommend Thanks for reading
Scritto da: VPT Inc
Cheap design limits clamping force
The leadscrew depends on a flimsy e-clip (circlip) to transmit force to the sliding jaw. Yes, this is a small vise and needn't be capable of generating tons of clamping force, but even a reasonably small force can easily bend the e-clip, rendering the vise completely nonfunctional. The first time this happened, I contacted the manufacturer and they sent me a replacement, which was decent. However, the amount of torque on the handle needed to cause this is quite easy to achieve, without placing undue force on the handle. This means that you basically have to baby this vise, for risk of rendering it (temporarily) nonfunctional. And even if the company will replace it, it isn't practical to have to go through this every time you need to clamp something firmly. I hate to say this about a genuinely made-in-America tool, but I've used similarly-sized generic Chinese vises which can provide more clamping force without failing. I hope Yost is capable of recognizing this issue and correcting it, but the vise I received is not one I can recommend.
Scritto da: WindyWest
Worth Every Penny!
Not only Made in the USA but shipped extremely fast and well packed to boot. This vise makes a perfect third hand for small projects. It fastens securely to the edge of most tables and stays where you put it. The quality is top notch and the precision is right on. The guide rods insure that the action is straight and true. Yes, this item is a little more expensive but, as they say, you get what you pay for and this is the proof. If you are looking for a small, compact vise that does all it claims it will do then this is the one for you. Looking for the Jaw Vise Caps for this vise? Found those here too and they are equally well made and worth the price.Yost 2.5" Aluminum Jaw Vise Caps, Model 325
Scritto da: D.
Quality Tiny Vise
Everything about this vice screams quality. Unfortunately, the stop on the main screw (jaw) is a very thin floating washer, if you crank it too tight, it will deform and render the vice non-working. This happened to me twice. Req disassembly to repair. Needs a redesign on that one issue. On the other hand, if you only need to work on small parts and won't ever over tighten it, this is a great little tool.
Scritto da: Rosanne C.
Clip not robust enough.
When I used the vise to hold something very tight and then let off the pressure, the little clip that opens the vise bent. I had to tap the bars in the back with a hammer to get it to open. I filed down a nut to back up the clip and it works fine now. For a product that is twice the price of the competitors, I would have expected better.
Scritto da: T. Allen
Nice little vise.
Not bad for a small light duty vise, a bit pricey but i’m willing to pay for American made products. This thing could use some better jaws. The supply of cheap Chinese products may start to dry up with new tariffs coming into effect. I keep this in my tool box at work and clamp it to various bench tops where needed. Bought one of wilton’s Clamp vises and it’s pretty awesome but Chinese made.
Scritto da: Speedreader
Works well
Product works well, is made of steel, and is heavy-duty. I only wish it was a little larger on the bottom, as it barely clips on to my workbench. However, it does hold studs and small wood-working projects well. My shipment was fast & I would purchase from this company again.
Scritto da: MZ
Vise
It's blue and it says YOST on the front. The jaws are machined flat(slightly serrated)and come together nicely. There is a vise similar to the yost at Lowes, but the jaws are painted over and the paint job is ugly. I gave this item 4 stars because it costs 2x as much as others similar to it.
Scritto da: Gildard Godin
Very happy with the purchase
High quality product. Very happy with the purchase.
Scritto da: Dennis S.
Compact purchase
I should have read the description more carefully, as this is a pretty tiny vise .
Scritto da: lott mckay
Five Stars
a super good tiny vise

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array