Малки части 18-8 Плоска шайба от неръждаема стомана, гладко покритие, отговаря на ANSI B18.22.1, 7/16 размер на отвора, 15/32 ID, 59/64 OD, 0,065 номинална дебелина (опаковка от 25) 7/16 0,469' инча 0,922' инча 0,065' инча 25

Name: Малки части 18-8 Плоска шайба от неръждаема стомана, гладко покритие, отговаря на ANSI B18.22.1, 7/16 размер на отвора, 15/32 ID, 59/64 OD, 0,065 номинална дебелина (опаковка от 25) 7/16 0,469' инча 0,922' инча 0,065' инча 25
Brand: Small Parts
Price: 56.06 EUR
Availability: InStock

Brand:Small Parts

3.5/5

lv
56.06

Отговаря на спецификациите ANSI B18.22.1. Обикновената повърхност няма покритие. 18-8 неръждаема стомана осигурява добра устойчивост на корозия и здравина. Плоската шайба осигурява опорна повърхност за разпределение на натоварването на крепежните елементи или действа като дистанционер.

Количество

Добави в кошницата Купи сега

EAN:

Категории Промишлени и научни разработки, Нигли, винтове и скрепителни елементи, Пластинки, Шайби с плоска резба,

Exterior Finish	Stainless Steel
Fastener Size	7/16"
Material	Stainless Steel
Outside Diameter	0.922' Inches
Washer Type	Flat

5 Star

4 Star

3 Star

2 Star

1 Star

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с^*

Вашата оценка

Scritto da: saggman54

as advertised

ordered #4 and they were the size that was listed. I saw some complaints, so I was a bit worried the size would not be exact. but the ones I received were the exact size as listed .125 x .312 x .032 using to back up pop rivets. perfect size. had to wiggle to get on, which is what I was looking for.

Scritto da: RAY RAGUSA

Incorrect sizeing

The washer itself is good however it is sized incorrectly.The od is 1/8 larger than indicated not much but in close tolerance situations not acceptable.

Scritto da: MeccanoManStan

They space between the gas can and cover.

Add rubber washer (https://smile.amazon.com/dp/B00JJXMJLC?psc=1&ref=ppx_yo2_dt_b_product_details) and some totally not-fitting replacement caps ( EONLION Gas Can Replacement Spout Kit, Flexible Pour Nozzle with Gasket, Stopper Caps, Collar Caps, Stripe Cap, Spout Kit for Water Jugs and Old Can, 6 Pack ) actually can be made to work. These are https://smile.amazon.com/dp/B009OJEA2M?psc=1&ref=ppx_yo2_dt_b_product_details. LIJ

Scritto da: DCMill

Inconsistant size & material quality/make-up is questionable...

I ordered these washers to use as backing for 1/8" pop rivets. Some fit very tightly & some did not fit at all, (too small on ID). While it was not critical for my application, the product description states that these are made of stainless steel, & therefor should be non-magnetic, This was not so as they were easily attracted to a refrigerator magnet. It is possible that these washers are made from steel with a very low alloy content & thus while technically qualifying as stainless steel, are still magnetic. As I stated previously, my current application for these washers does not require corrosion resistance or non-magnetic properties that one would expect from a stainless steel product, however I do expect products which I purchase to be as described & this product was not. Based on the needs of my project, I was satisfied with this purchase as it was adequate for my current needs, however I am disappointed in the quality of the product I received & would definitely check other sources if purchasing this product again.

Scritto da: User7601

Excellent washers. Would buy again.

I like these washers. Nice.

Scritto da: Daniel

Size not accurate

Od of washers recieved were smaller than description

Scritto da: M. Kettler

It's a washer. But handy to get the right part delivered.

Look, they're just washers. They meet their specified size, and are stainless. The stainless is non-magnet reactive, which is how it should be with 18-8. That said, the 2 local stores I checked don't carry this size in stainless steel. I needed stainless for a food-contact application, and a larger size just wouldn't fit. Getting this part delivered via prime to my door without having to hunt all the local stores was worth the price-markup and being forced to buy 5.

Scritto da: Richard N Cartwright

Stainless steel flat washer

Exactly as advertised.

Scritto da: Jeremy Porter

Hard to find these locally. Used to add a drain to a wooden deck cooler.

I used these to help with adding a drain to an outdoor wooden deck cooler. The inside is just a normal plastic cooler and these washers fit the hole with my fittings perfectly. It's hard to find stainless washers like this anywhere locally so I paid more than I think they are worth on Amazon.

Scritto da: kelvin s.

Not Stainless steel, totally magnetic

These Washers are totally magnetic, not Stainless steel. Not worth the return process. I will through these in a bin and go find real Stainless steel Washers. Waste of 13$ and 1 week shipping

Scritto da: Colleen

Pricey but I needed it.

The only place I could find this item in the time needed.

Scritto da: John Bender

Did the job

I liked the product because I was able to repair my snowblower

Scritto da: mike boardman

Doesn't do tricks.

Well it's a washer, an expensive washer but I needed it asap and it did it's job.