M-D 82586 36 Кафяв винил Двоен дюрометър Дъно на вратата 1-3/4 инча Ш X 36 инча Д X 1/2 инча В

Name: M-D 82586 36 Кафяв винил Двоен дюрометър Дъно на вратата 1-3/4 инча Ш X 36 инча Д X 1/2 инча В
Brand: M-D Building Products
SKU: 0043374825862
Price: 76.07 EUR
Availability: InStock

Brand:M-D Building Products

3.5/5

lv
76.07

ОПИСАНИЕ НА ПРОДУКТА M-D Building Products 82586 M-D дъно с двойна врата, 1-3/4 инча Ш X 36 инча Д X 1/2 инча В, X X, кафяво ОТ ПРОИЗВОДИТЕЛЯ Резервно дъно на вратата с винилови перки. Подходящ за повечето марки входни врати. DB346 пасва на различни 1-3/4-инчови стоманени или дървени врати

Няма налични единици

EAN: 0043374825862

Категории Наръчни средства и домашно обзавеждане, Хардуер, Оборудване за врати и ключалки, Прагове,

Марка: M-D Building Products. Забийте с пирони или скоби към ограничителя на вратата, така че уплътнението да се притисне леко към горната част и страните на затворената врата, за да уплътни елементите. Заменя много предварително окачени дъна на вратите. Всесезонна защита срещу течения, влага, прах и насекоми.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	M-D Building Products
Color	Brown
Color	‎Brown
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 484 ratings 4.4 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Steel
Included Components	‎Hardware;Door, Gate & Window Hardware;door-kick-plates
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	38 x 4.5 x 4.8 inches
Item model number	‎82586
Item Package Quantity	‎1
Item Weight	‎3.2 ounces
Manufacturer	‎M-D Building Products
Part Number	‎82586
Product Dimensions	‎38 x 4.5 x 4.8 inches
Size	‎1-3/4 in W X 36 in L X 1/2 in H
Warranty Description	‎All m-d products are warranted to be free from defects in material and workmanship if installed and used in strict accordance with our installation instructions. Our liability is limited to our sale price of any products proved to be defective or, at our option, to the replacement of such products upon their return to us.

5 Star

4 Star

3 Star

2 Star

1 Star

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с^*

Вашата оценка

Scritto da: Geoffery Marquez

Great Product

Fit as expected.. 100% recommended

Scritto da: blumarlin

Extremely sturdy

Well made and appears to be durable. We needed this particular weather strip for door bottom. We were unable to find this exact one locally.

Scritto da: dazzler11

Reasonably good quality, but rain drip drags and gets caught under door.

Replaced with the same type that was probably on my door since new. Easy to install by removing the door and using the existing screws. I had to trim about half inch off the end and I also used a bead of caulk to be sure of good contact. Upon completing the job, all of about half hours work, noticed that the rain drip makes contact with the threshold and drags back in under the door, luckily my front door is fairly well covered so not a lot of rain gets to it. See how long it lasts but next time will look for one that has a higher rain drip to avoid drag.

Scritto da: ponchodfm

Great replacement for an aluminum storm door

Like many things today I couldn’t get a replacement bottom door seal for an aluminum storm door. So I adapted this to work with a few pop rivets.

Scritto da: willard atwell

seal

door is now hard to close.

Scritto da: JC

I couldn't get this to work -- bound up in the hinge corner

There's a lip that slides over the long-edge of the door and then the strip almost snaps into place. The lip is very thin and it's difficult to get the strip to stay in the correct position without the lip rolling under. The strip is actually quite thick, so it's hard to nail through. The nails need to be inserted between the fins, and it's nearly impossible to get the nails (not provided) flush with the bottom of the door since the fins are rigid enough that a hammer blow can't pound in the nails all of the way. I tried splaying open the fins, but that put my fingers right next to the nail and therefore the hammer head couldn't hit the nail without also hitting my fingers. Once I finally managed to get the nails in flush (I only cursed twice), and managed to get my heavy front door back on its hinges (use a buddy to help you!), I quickly discovered that the strip was too thick on the hinge side/corner because the fins there couldn't lay flat but instead almost stacked on top of one another. (I'm not sure this is making sense!) The problem wasn't that the gap was too narrow for the strip. The problem was that the plastic/rubber material the fins are made up got bound up in the hinge corner. Note that the strip was exactly the correct length of my door -- it wasn't too long. I tried cutting it back, but that then left a gap along the bottom of the door -- which was the very problem I was trying to solve. It could be that my door is all out of whack and you'll be fine, but I found it impossible to use this product, and after cutting it and putting nail holes in it there's no way to return it.

Scritto da: Lorasa1719

Cheaply made does not last

The strips at the bottoms stated to break after a few months. Not a very reliable product and difficult to attach…now have to do it again!

Scritto da: Amazon Customer

Good quality

I like the product

Scritto da: Amazon Customer

Door excluder.

Easy to fit. Very good price and arrived well before the date stated. Very pleased with it. Did the job.