Ловци Специалности Лесен за сглобяване Монтаж за трофей H.S. Монтажна плоча за три бради Strut с покритие от естествен дъб, кафяво

Brand:Hunters Specialties

3.6/5

lv
125.54

ЗА ЛОВЕЦ НА ПУЙКИ - Вие свършихте тежката работа, така че сега е време да покажете своето умение да ловите на пуйки! Тази плоча е елегантният, лесен и сигурен начин да покажете вашите трофеи, без да се налага да ги сменяте често. КАКВО Е ВКЛЮЧЕНО - Ще получите опционални куки, които са включени, за да покажат две допълнителни бради, лазерно гравиран стърчащ гоблер на основния панел, гравируема месингова табелка с име, подробни инструкции за монтиране. На снимката не са включени ветрило, брада и шпори. ЛЕСНО ЗА СГЛОБЯВАНЕ - The Hunters Specialties H.S. Монтажната плоча Strut Three Beard е толкова лесна за инсталиране - просто използвайте винтовете, които включва, и сте готови! Няма нужда от сглобяване или модификация на черепа. КОНСТРУКЦИЯ - Плакетът с покритие от естествен дъб има лазерно гравиран гълтач в пълна подпора отпред и е проектиран да държи лесно ветрилото на опашката, брадата и шпорите на една пуйка. Включени са допълнителни куки за монтиране на допълнителни две бради. ПЛАКА ЗА МОНТИРАНЕ НА ТРИ БРАДИ - Най-добрият начин да покажете ценните си трофеи! Лесен комплект за монтиране на ветрило и брада „направи си сам“, който ви позволява да добавите неоспоримо докосване на класа към декора на вашия дом.

Няма налични единици
ЗА ЛОВЕЦ НА ПУЙКИ - Вие свършихте тежката работа, така че сега е време да покажете своето умение да ловите на пуйки! Тази плоча е елегантният, лесен и сигурен начин да покажете вашите трофеи, без да се налага да ги сменяте често. КАКВО Е ВКЛЮЧЕНО - Ще получите опционални куки, които са включени, за да покажат две допълнителни бради, лазерно гравиран стърчащ гоблер на основния панел, гравируема месингова табелка с име, подробни инструкции за монтиране. На снимката не са включени ветрило, брада и шпори. ЛЕСНО ЗА СГЛОБЯВАНЕ - The Hunters Specialties H.S. Монтажната плоча Strut Three Beard е толкова лесна за инсталиране - просто използвайте винтовете, които включва, и сте готови! Няма нужда от сглобяване или модификация на черепа. КОНСТРУКЦИЯ - Плакетът с покритие от естествен дъб има лазерно гравиран гълтач в пълна подпора отпред и е проектиран да държи лесно ветрилото на опашката, брадата и шпорите на една пуйка. Включени са допълнителни куки за монтиране на допълнителни две бради. ПЛАКА ЗА МОНТИРАНЕ НА ТРИ БРАДИ - Най-добрият начин да покажете ценните си трофеи! Лесен комплект за монтиране на ветрило и брада „направи си сам“, който ви позволява да добавите неоспоримо докосване на класа към декора на вашия дом.
Brand Name ‎Hunters Specialties
Color ‎Brown
Customer Reviews 4.6 4.6 out of 5 stars 1,073 ratings 4.6 out of 5 stars
Included Components ‎See descritption
Item Dimensions LxWxH ‎1 x 1 x 1 inches
Item Package Dimensions L x W x H ‎16.02 x 8.5 x 2.17 inches
Item Weight ‎16 Ounces
Manufacturer ‎Hunters Specialties
Material ‎Aluminum
Model Name ‎Hunters Specialties H.S. Strut Three Beard Mounting Plaque
Number of Items ‎1
Package Weight ‎0.77 Kilograms
Part Number ‎HS-STR-06949
Size ‎One Size
Sport Type ‎Hunting
Style ‎Trophy Mount
Suggested Users ‎Unisex-adult
Warranty Description ‎1 Year Limited

3.6

13 Review
5 Star
76
4 Star
15
3 Star
4
2 Star
2
1 Star
3

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: James m.
Great mount!!
Its my first time mounting a turkey fan and it was super easy. Looks great!! Definitely buying it again!
Scritto da: Bear lick ranch
Works great and looks great
Great product and for a first timer, I thought it was fairly simple to complete after following the directions and following a couple of taxidermists on YouTube. Will buy again????????
Scritto da: Devin hall
Awesome way to display your turkey mount.
Bought it to try and mount one for the first time. Extremely easy kit and looks great. Will definitely be buying more. Very instructional video on YouTube of this same kit and how to mount one also
Scritto da: benjamin
Good quality
Great product. Easy to assemble.
Scritto da: Amazon Customer
No mounting instructions!
Had to go online to there website to figure it out! I made a few mistakes along the way but got it done! Looks great at the cabin
Scritto da: joe debiase
no instructions
to mount the fan there is not much space you only get about 3/4 of space to work with and the slots for the beard and spurs no idea they need to be drilled out to fit for the money a it is good but just takes work to fit it all together look at the picture showing the product they did not add the smaller feathers that makeup the fan
Scritto da: Hockey Player
Easy to work with this kit to customize your mount
What I liked about this kit is that you have plenty of flexibility to customize it. Both pieces of wood are solid oak. The gap in the backside into which your tail base will fit, is wide enough to accommodate a thicker tail (I left three layers of tail feathers in place. I was in a hurry when I mounted the tail for drying so i left quite a lot of meat on the feather base. But no problem - I could still mount the tail where it needed to be). Take a look at the instructional video that the HS Specialties posted on youtube. It will make everything easy to understand and give you some inspiration for doing things the way you want them. I filled the ends of the two feet/claws with epoxy and screwed a small gold hook into them. I used the two ring eyes provided in the kit and screwed these into the pilot holes along the bottom of the top face plate of wood. This will let me remove a foot if someone wants to see it up close. But you can use the provided leather strapping - there are slots in the backside of the face plate that the leather can be glued into to form a loop. The image of the turkey on the face plate looks fine. It's not something I really was looking for but it's not offensive. If I had to get critical, the bottom piece of wood had some underlying staining. Nothing terrible, but not a pure oak grainy finish. Also along the top piece of wood there was some shiny edges where it rubbed inside the package during shipping and handling from the manufacture and ultimately to me. It's not worth returning or squabbling about. I didn't have any problems with the hardware or screw breaking. Keep in mind you are placing the screws into dense oak so if it feels too tight, drill the holes out a little more. If you have a little bit of DIY in you, you'll have a good time creating your work of art.
Scritto da: Yooper62
Missing mounting hardware
Finally got around to using this and found out it was missing the hardware package. I am way past the return so going to have to figure out a hack or get another mount kit. Also noticed the alignment is off, so I would have to re drill screw holes. Looks like would be fine if I can make this work. My advice is check out your package before the return period ends.
Scritto da: wendy vandine
Great display item
Plaque looks great but the package was missing the brass cups and the image of the turkey engraved into the wood was a nice touch but it wasn’t all the way blackened in which wasn’t a big deal.
Scritto da: Amazon Customer
Very good quality
Was exactly as I expected and good quality. Bought 2!
Scritto da: Gregoire1960
One of the best kits available
Very nice kit, looks very professional if you take the time to do it right. I'd suggest replacing the screws with new hardware as the screws provided are cheap and can shear off easily (it happened to me). Also, I used a few cardboard shims to hold the fan in the bracket rather than screwing it in place. This was much faster and allowed me to adjust the fan so it was just right once mounted on the wall. I didn't bother with the extra beards as I preferred a cleaner look, but that's just my choice.
Scritto da: Ben XII
Five Stars
Easy use
Scritto da: Michael Attwell
Five Stars
Superior product, price and excellent service..!!

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array