Комплект въртящи се инструменти WEN 2305 с основен комплект инструменти с кабел с гъвкав вал

Brand:WEN

3.5/5

lv
107.79

ОПИСАНИЕ НА ПРОДУКТА Спомняте ли си, когато въртящият се инструмент беше само мечта? Издълбавайте, режете, шлифовайте, премахвайте грапавини, гравирайте, оформяйте, пробивайте, полирайте и други глаголи, всичко това с комплекта въртящи се инструменти WEN. Оборудван с над 80 аксесоара, този пакет предоставя голямо разнообразие от битове и дискове, за да отговори на нуждите на всеки проект. Променливата скорост варира от 8 000 до 30 000 RPM с корекции с просто завъртане на копчето. Леката конструкция прави сложните дизайни лесни за изпълнение, което ви позволява да издълбавате малки и сложни дизайни в стъкло, пластмаса, дърво, стомана и др. Премахнете ръждата от ръждясали неща. Подстрижете ноктите на краката на вашето куче. Гравирайте красиви изображения в прозорците на съседите си, докато са на почивка в Рим. Възможностите са безкрайни, ограничени само от вашето въображение и федералния закон. И тъй като е продукт на WEN, вашият ротационен инструмент е подкрепен от едногодишна гаранция, национална мрежа от квалифицирани сервизни техници и приятелска и услужлива телефонна линия. Спомняте ли си, когато разполагахте с гъвкавост и сила в дланта на ръката си? ОТ ПРОИЗВОДИТЕЛЯ Ротационните инструменти са едни от най-гъвкавите инструменти. Комплектът ротационни инструменти WEN 2305 с гъвкав вал позволява прецизни детайли на вашите проекти. С този инструмент можете да полирате, шлайфате, шлифовате, режете, пробивате, отстранявате неравности и оформяте. Променлива скорост от 8 000 до 30 000 RPM с мощен 1 AMP мотор и двойна изолация за безопасност. Ако можете да си го представите, този инструмент може да го постигне. Почистете и реставрирайте тези по-стари мебели. Добавете някои интересни детайли към други. Можете да правите изрези в гипсокартон, шкафове и др. Включва 80 аксесоара за всички ваши нужди за рязане, шлайфане, полиране, шлайфане и пробиване и се съхранява удобно в персонализирана кутия. Рейтинг: 120V, 60Hz, само AC

Прикрепете включения гъвкав вал за задачи, изискващи сложни детайли и прецизност. Вграденото заключване на шпиндела прави бърза и лесна смяна на накрайниците. 2,3 мм и 3,2 мм цанги. Включва комплект аксесоари от 80 части от битове, шлифовъчни дискове, полиращи подложки, дорници и др. Променливата скорост варира от 8 000 до 30 000 RPM. Перфектен за рязане, шлайфане, полиране, оформяне, пробиване, премахване на ръбове, шлайфане и др.
Batteries Included? ‎No
Batteries Required? ‎No
Brand WEN
Brand ‎WEN
Color As the Picture Show
Color ‎As the Picture Show
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 21,417 ratings 4.4 out of 5 stars
Included Components ‎Case
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎7 x 11.5 x 3.8 inches
Item model number ‎2305
Item Package Quantity ‎1
Item Weight ‎3.6 Pounds
Manufacturer ‎WEN
Maximum Rotational Speed ‎30000 RPM
Minimum Speed ‎8000 RPM
Part Number ‎2305
Pattern ‎Tool Kit
Power Source Corded Electric
Power Source ‎Corded Electric
Product Dimensions ‎7 x 11.5 x 3.8 inches
Special Feature Lightweight, Variable Speed
Special Feature ‎Lightweight, Variable Speed
Special Features ‎Lightweight, Variable Speed
Style ‎Corded Basic
Voltage 120 Volts
Voltage ‎120 Volts
Warranty Description ‎1 year limited warranty

3.5

12 Review
5 Star
67
4 Star
18
3 Star
8
2 Star
3
1 Star
6

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: SSteacher95
Did everything I needed it to do.
I am a hobbyist and NOT a professional. I needed a rotary tool to custom fit AK-47 furniture and didn't want to spend a ton of money on a tool I wouldn't be using a ton. I was very happy with this rotary tool. It was easy to use and I had no issues with power or reliability. If you're on a budget and need a light duty rotary tool, this one should be a good match.
Scritto da: David Young
Excelent!
I have owned a similar tool since 2008. Which cost me like $50 dollars at the time. Came with about ten or so bits. No tool box etc. It still works as well today as it did when new. But the bits are all worn out. So I bought this one from Amazon. For $36 dollars. Having noticed the wide selection of bits. Not only dos it have all the bits I need. But the tool is a lot more beefy and better constructed than my old one. I also like the cable attachment. Great for delicate work. Oh! And it wasn't over packed! Over use of packaging being a pet peeve of mine.
Scritto da: Derek D Muehlberger
Decent Rotary Tool
I wanted a small rotary for carving foam pumpkins. This one does a good job. Bonus that it has leds in the end...really helps to see those small details. Battery life is good for what I do with it. And this tool does a good job modifying die cast cards too. The tool isn't quite as small as I was hoping for but it is smaller than my Dremel 3000.
Scritto da: Amazon Customer
Not a Dremel but fraction of the cost
Lots of stuff provided with the tool for a fraction of the cost of a dremel. What I found was that the drill head was not totally centred and thus when doing fine stuff, seem to wobble a little. Ok for what I wanted and thus decided to keep it. IF you need it for fine work, get a Dremel.
Scritto da: K. Cate
Really good for trimming pet nails.
This is my third dremmel. I use mine mostly for trimming dog toe nails. I have worn out two others that cost a lot more. I like this one because it is smaller and more nimble in my hand and because the light really does help me see to do the nails. I have used it for a while now and I would recommend it.
Scritto da: Michael
upgrade rotory tool
I had a cheep $10 rotary tool that finally gave up the ghost. Decide to upgrade a little to this more powerful rotary tool. I tried out first day I got it. It was fairly quite didn't need any ear protection. I wasn't cutting anything just sanding/grinding. It did the job really well. It's not too heavy and did not fatigue my hand and wrist after 30 min. work with it. The motor did not overheat and did not feel hot to touch after turning off. I would have like it it had more grinders in the kit (what I use most) only has about 3. I only had a day so will update again after 6 months on the reliability or how it holds up.
Scritto da: Hannah M
Bought for EVA foam
I bought this to help shape EVA foam for cosplay. It’s worked great for that so far, though I still haven’t gotten the extension tool to work yet, which is rather annoying.
Scritto da: JMJT
It was great value!
It was great value.
Scritto da: Murugesan ஸ்
Not worthy of money
Not worthy of money
Scritto da: Abhinav chauhan
Machine and its bits falling apart in a days time!
The machine is a total waste. I bought this rotary tool on the 18th of April ‘18 and was delivered to me on the 24th of April ‘18. In one day of use, in which the usage was just to test the product, the below mentioned things have happened. 1. In 10 minutes of first time use, the sanding drum mandrel bent out of shape after immense vibrations. The sanding drum ripped apart while sanding a piece of soft wood. 2. The flex shaft which i installed as per the manual overheated and the wire melted away. 3. The cutting disk broke while in use and flew towards my face. Now i have a battle scar right below my lower lip. 4. There is sparking inside the machine. WEN industries should really look into these issues.
Scritto da: GTS
Proceed with Caution.
- Poor bit quality. - Shaft and motor overheats very quickly - when using bits with a large diameter on low rpm, bit oscillation is very high. Hence unable to use. Could be dangerous even for power users.
Scritto da: Musa
Not workin properly speed not control not working to high speed and Variable after 2min later broke
Please do not buy not good

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array