Класически аксесоари Over Drive PolyPRO 3 покривало за кемпер, подходящо за 8' - 10' кемпери, покривало за кемпер RV, адаптивно прилягане, водоустойчиво, защита през всички сезони за кемпер, сиво/снежно бяло 212L (отгоре) x 126L (отдолу) x 102W x 92H

Brand:Classic Accessories

3.1/5

lv
1096.63

Издръжливите покривала PolyPRO3 RV осигуряват рационализирана, силна защита, която се отличава от останалите. Когато купувате от Classic Accessories, вие ще получите спокойствие заедно с вашия продукт. каним ви да подадете прост иск на нашия уебсайт, подкрепен от нашия екип за поддръжка на клиенти.

Няма налични единици
ЗАЩИТЕТЕ ВАШАТА ИНВЕСТИЦИЯ В RV: Търсите повече начини да защитите вашия RV? Classic Accessories предлага широка гама покривала за RV, от туристически ремаркета до кемпери до ремаркета R-Pod и др. Панелите с цип позволяват достъп до вратите на RV и двигателните зони, докато интегрираните презрамки и системата за чанти за хвърляне позволяват бърз монтаж. Чувалите са включени във всички капаци, а капачките за стълби са включени в повечето. Регулируемите опънати панели и еластичните ъгли на подгъвите осигуряват прилягане по поръчка, докато вентилационните отвори намаляват напрежението от вятъра и вътрешната влага. Дебелият трипластов плот предпазва вашия RV от дъжд, сняг, мръсотия и драскотини за защита през целия сезон. Покупката включва 3 години гаранция. Покривало за кемпер: Подходящо за кемпери с дължина 8' - 10'.
Brand Classic Accessories
Brand ‎Classic Accessories
Color Multi
Color ‎Multi
Country of Origin ‎China
Customer Reviews 4.1 4.1 out of 5 stars 639 ratings 4.1 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Fit Type Universal Fit
Fit Type ‎Universal Fit
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎Yes
Item Dimensions LxWxH 241 x 106 x 102 inches
Item Dimensions LxWxH ‎241 x 106 x 102 inches
Item model number ‎80-036-143101-00
Item Weight ‎18.3 pounds
Manufacturer ‎Classic Accessories
Manufacturer Part Number ‎80-036-143101-00
Material Fabric
Material ‎Fabric
Model ‎Classic Accessories OverDrive PolyPro 3 Deluxe Camper Cover, Fits 8' - 10' Campers
Product Dimensions ‎241 x 106 x 102 inches
Vehicle Service Type Recreational Vehicle
Vehicle Service Type ‎Recreational Vehicle
Water Resistance Level Water Resistant
Water Resistance Level ‎Water Resistant

3.1

12 Review
5 Star
59
4 Star
17
3 Star
7
2 Star
6
1 Star
11

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Mlaws
Lasts about 5 years
We live in the PNW and this cover lasted us about 5 years until we just replaced it. Covers our arctic fox 992
Scritto da: Jeffers
Time will tell
It fits, keeping our pop up- slide in covered. Actually, almost would cover the entire truck too. It's an F150 extended cab.
Scritto da: M&D
Classic vs ADCO-** THIRD UPDATED REVIEW**
**Update #3** One year after replacing defective cover. The replacement cover is now approximately 1 year old. Almost all of the strap mounts have failed. (see pics). I've had to use safety wire to reattach them so they work. They are horribly weak in their attachment and fail easily. The cover itself is ripping on the top already after 1 year. This zippers are very weak and if you have a center door configuration, you will fight getting into the door while fighting the covers layout. Other than a good fit, I can't think of a single reason to buy one of these ever again. **Update #2** The replacement cover finally arrived. After one month of service, one of the under unit (belly straps) attachment points has already fallen off. The attachment material must be really poor. Overall, stay away from this cover! **Update** This cover suffered a rear corner zipper failure at 11 months. This is puzzling as this zipper was used around a total of 5 times since purchased. These zippers are rather flimsy and are placed on the outside edges of the camper. I believe this to be a design flaw as this is also where a cover gets stressed a lot. At least the zippers SHOULD be heavier duty. I contacted the seller. The Amazon receipt was not enough for warranty coverage. I had to get the "numbers" off of the camper tag. (see picture) The tag had faded in 11 months to a unreadable degree. Fortunately, after much searching I found the stuff bag which also had the needed numbers on it. I don't know if warranty would have been extended without these numbers. Take pictures of your tags if you buy one of these covers, but you should really look elsewhere! After going through these hoops for 3 days, I was informed that the cover was warrantied. HOWEVER, they had none in stock for at least 3 MONTHS to replace it. I am supposedly going to receive a cover shortly (we'll see). In the last month (the cover is now one year and 2 months old) both corners have torn (see pictures). How much of this is due to the rear zipper failing, I don't know. My ADCO covers always lasted 2.5 years, so this cover is well under that standard. I figure the replacement cover (if I ever receive it) is maybe good for another year. Then it's back to ADCO for me. Original review: I have used ADCO covers for my camper since 2001. Their average lifespan is just over 2 years before the tops rot out and disintegrate. My camper, which was covered under the ADCO's for 99% (the other 1% is when it is in use) of the time during it's life suffered extensive water damage at the slide-out. How this water damage can occur when it is basically covered all of the time is beyond me. Now that the camper has been repaired, I just decided to try something else in covers, thus this purchase. Since I have no time yet with this cover, I can't say how long it will last. However, I can say that its basic design seems better than the ADCO's it replaces. Firstly, the roof seems waterproof, unlike the ADCO which water goes straight through. Secondly, the top is vented, allowing air to circulate. Thirdly, this cover has zippered sides to allow service to side bays when it is covered. Fourth, the cover has a large zippered opening n the back allowing easy ingress and egress with the cover on. ADCO covers have a very narrow door opening. As far as fit, this cover fits much more custom on my Lance 1121 ( 11'-6" bed length). The ADCO fits much baggier. This fits custom. That being said, I think it would be a real squeeze to fit a larger camper than this one into this cover. My Lance has no "basement" thus fitting lower to the truck. It also doesn't have the higher ceiling over the cabover bed that the newer ones do. This cover (Large size) barely fits the cabover portion in length and height. I don't know how it could fit a higher style one like the new campers have. Shipping was very fast. I will update this review in time to see how it wears.
Scritto da: Yoly Mullen
A really nice cover for the money. A bit too big but still works great.
The media could not be loaded. My wife and I installed this cover today for the first time. It protects a 2016 Adventurer 80RB. The sizing was confusing and the range of fit has something to do with the very loose fit. "Fits 8 to 10 foot campers". Since the Adventurer is an 8 foot camper, it's very loose with lots of sag in some areas. That being said, it is designed well in that the elastic around the bottom and draw straps collect and secure the excess pretty well actually. It was surprisingly light weight which made handling it easier than I thought. The downside to this however is that the slightest breeze will defeat 10 minutes of work in an instant. It was harder to put on than I thought but my wife and I managed it in about 45 minutes. It took 10 minutes just to get it unfolded out of the bag and for us to figure out what we were looking at (what was the front etc.). Remember, this was the first time we'd ever put any kind of cover on an RV. In the end, I was pleased with the fit and the security of the cover. I think it will do a good job of doing what it's intended to do. It does have vents along the sides at the top for ventilation which are covered by the white roof overhang material. The only prep I had to do was tape pieces of 2 inch memory foam over the sharp gutter drains on the 4 roof corners and fold the FM antenna down. I also undid the rear zipper along one side which allowed entry through the rear door (only unzipping one side). I added a couple "tarp clips" at the front and secured them with two bungee cords (excess material on the front underside. The front section fits the most loosely but I was able to squeeze in the tee upright support that I had made for the camper which really holds the material captive. (see photos). We followed the directions and everything went as they described. Classic Accessories OverDrive PolyPRO 3 Deluxe Camper Cover, Fits 8' - 10' Campers - Max Weather Protection with 3-Ply Poly Fabric Roof RV Cover (80-036-143101-00) UPDATE: 12/29/16 - Updated from 4 to 5 Stars .... See added video :-)
Scritto da: Lori Bing
Better than others we have purchased
Just installed and appears stronger better built than the last one we bought.
Scritto da: T. Fleming
Nice cover - Cut off the tag or photograph it since it will be needed for warranty claim (see photo)
Our PolyPro 3 RV Cover For 6-8' Campers Truck Camper Cover fits our 2019 Adventurer 80RB truck camper perfectly. Our last cover (A different manufacturer) did not fit well and the wind tore the stress points beyond repair. The cover would have lasted a few more years if it had fit better. In addition this cover has vents and in the worst of winds I am not concerned for the cover. Since most of the covers are made from the same material, FIT should be at the top of your list and then vents. Update: I tried to use the 3 year warrantee after 24 months. (I only asked for a discount on a new purchase, not a new cover) Filled out the online warrantee form with pictures of the tears.st The tag that is sewed to the cover was faded and could not be read. (I sent a picture). They gave me the runaround... wanted more pictures and another warrantee form. Tip: Either cut the tag off and stow it away or take a photo. I like the cover and will probably purchase another BUT I am not impressed with the warrantee process. Lowered the rating to 3 stars. UPDATE: After some hesitation, Classic Accessories has agreed to send me a replacement cover. I am changing my rating to 4 stars. I do like the cover much better than others I have purchased.
Scritto da: James A Schminky
Fits and looks great
Still new but was easy to install and has stayed on in 40 mph + winds. Couldn't ask for more so far.
Scritto da: Amazon Customer
Good fit for Northern Light 8-11 camper
Easy to install and a great fit on my camper. Seems like nice quality.
Scritto da: Don M.
Good quality, but a little big on an 8' 9" camper.
A little baggy, but it still works fine, but waiting to see how bad it flaps in the first fall windstorm. Could use more cinch points around the cabover area to take up the slack.
Scritto da: Jason
Worth the money
Cover fits well but the front only has elastic band sewn in and it should have a couple buckle straps to take up the slack. 2007 Adventurer 80W.
Scritto da: Robb
Quality and fit
I am very pleased so far with the Camper cover on my Northern Lite 8 11 SE. Fits perfectly and has already endured a huge snowfall. The material seems of good quality, the access is great and its easy to put on. Really pleased so far BUT its only been a few months!!
Scritto da: Robert Harding
Lasted 5 months
Update May 2021... After using the cover for 2 winters, the white fabric that is used for the top part is coming apart. It's disintegrating in a white powder when I brush my hand over it. So forget about using it another winter. It's so fragile we had to be very careful taking it of the camper so it wouldn't rip. We live in Quebec, Canada so we are not talking blazing Texas sun here ! And we don't use it during the summer. So it had the very least exposure to the sun if used for what it was made for... Protection... It is not a good value. For this kind of money I would expect it to last at least 4 or 5 years. Next winter I'm buying a heavy duty tarp and will wrap it tite on the camper so it doesn't flap around. I'm very disappointed. Update April 2020... The strap that goes under the front of the camper, where the bed is, ripped off the cover. So it lasted 5 months... When I ordered the cover for my Northern Lite camper, I knew I wasn't getting the best cover. The top is OK. But the side is only "one" ply. So I won't say anything bad about these facts. But the way it fits and the way they try to make it snug is not the best. The front part that covers the bed area, is held in place by one strap in the middle and an elastic around the front, that is suppose to keep it snug. I'm no engineer... But I'm sure that the first big wind we have will catch that front part and flip it over. It is way to loose to stay there. By the way, the bed in the Northern Lite is a full Queen size. So the size of the camper is not the problem here. I will not wait for it to ripe apart. I will try to find a way to clamp something to the front of the cover without creating too much stress and tie it to the front jacks.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array