Kegco EBDHCK2-5T Deluxe Homebrew Комплект за преобразуване на кегератор за монтиране на врата с две кранове с 5 lb. Алуминиев резервоар за CO2

Brand:Kegco

3/5

lv
1147.34

Успешно преобразувайте хладилник или фризер във високоефективен диспенсър за домашна бира с лекота благодарение на комплекта за преобразуване на Kegco Deluxe кегератор с два крана! този комплект се предлага с всички висококачествени компоненти за търговска бира, от които ще се нуждаете, от търговски регулатор с двоен габарит за безопасно и удобно управление на CO2 до тава за отцеждане от неръждаема стомана, която улавя капки и разливи за лесно почистване. Комплектът дори идва с празен алуминиев CO2 резервоар от 5 lb с привличащо вниманието лъскаво червено покритие, което осигурява допълнителен слой защита срещу износване и корозия. Проектиран за използване с бурета за домашна напитка Cornelius ball lock, този комплект се доставя с два комплекта съединители за бурета за домашна напитка с топче заключване, които ви позволяват да разпределяте от до две бурета едновременно.

Включва чисто нов празен 5 lb. алуминиев резервоар за CO2, изработен от високоякостна алуминиева сплав с лъскаво червено покритие, което действа като допълнителен слой за защита срещу корозия и износване. Двата кранчета за бира, одобрени от NSF, се отличават с тела от кован месинг със силно полирани хромирани покрития, месингови валове и лостове с незалепващи сферични шайби и черни ABS пластмасови копчета за кранове. Тавата за отцеждане, монтирана на 10 широки врати, се отличава с изчистен дизайн и надеждна конструкция от неръждаема стомана и може лесно да се монтира с помощта на двата удобно разположени отвора за винтове на задната повърхност. Този комплект се предлага с два комплекта съединители за бурета със сферично заключване, всеки от които включва както вход за газ, така и съединител за изход за бира, за да ви позволи лесно да докосвате бурета за домашно варене на Cornelius Pepsi. Издръжливо конструиран да доставя постоянен поток изливане след наливане, регулаторът с двоен габарит разполага с регулиращ клапан в стил Т, който улеснява регулирането на налягането вътре в бурето.
Brand Kegco
Configuration Door Mount
Country of Origin USA
Finish Type stainless steel
Installation Type Screw In
Is Discontinued By Manufacturer No
Item model number EBDHCK2-5T
Manufacturer Beverage Factory
Model Name EBDHCK2-5T
Number of Doors 1
Pattern Solid
Product Dimensions 15 x 15 x 30 inches; 19.25 Pounds
Specification Met NSF

3

8 Review
5 Star
53
4 Star
16
3 Star
16
2 Star
5
1 Star
10

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: craig
Good
Nice equipment just missing parts
Scritto da: bill dufner
Quality control could use some focus going further!
For me I am disappointed in the kit, yes it is all there! Yes it’s everything you might need. But you will end up replacing what inexpensive parts they have shipped you! I am mot new to the installation of beverage delivery systems! I had this shipped to a remote location to where it would be installed. This location is far from my home and I didn’t want to haul it up. Let’s start with the Good! Pretty bottle, great instructions, shipping was convenient and on time, packing was considerate as to no damage during travel! The bad Co2 lines are nicely color coded, but so incredibly stiff, and bundled so tight one kinked before even unwrapping it from its Sullifane wrap. The finger tightened clamps that come with the kit are so inexpensive they all leaked and I replaced them with a better clamps. The reusable seal on the Co2 had a divit in one side so I didn’t even try to trust it and replaced it with my own seal. The shanks were 2 different lengths for some reason but did have the same product number so probably a manufacturing issue. The ball locks had a bur on the Co2 side at the seam that you could not release from the fitting without it poking you. Again probably a manufacturing issue. Because of Murphy’s law, I anticipated most of the issues based on other reviews. But here is my honest opinion. Put the system together on your own, the faucets, the Sanke, the ball locks, the beverage lines, the Co2 lines. The regulator and shut offs. I knew I was puting too much trust into the name by reading the reviews. I could have done it less expensively and better quality made products. Get an exchange bottle instead of the pretty one! A lot of my issues may seam petty but anything under pressure should get it’s fair amount of attention to detail!
Scritto da: Amazon Customer
The listing for the kit contents is somewhat misleading.
The conversion kit is what I expected for the most part. Except, the kit doesn't completely match the Amazon listing. From the listing I purchased the product : "Includes a brand new empty 5 lb. aluminum CO2 tank made from high strength aluminum alloy with a glossy red coating that acts as an extra layer of protection against corrosion and wear." The product arrived in good condition and all items were as described except the tank. I received the KEGCO standard 5# cylinder, NOT the coated one as described...... I know it's a small thing, but when you make a purchase expecting something, you want what you ordered. I would have reached out to try and exchange just the tank, but Amazon seems only interested in returning complete orders and if there is a resolution process they hide it well. So I eat the 10-15 dollar loss in the value difference of the tank, as I am trying to get my new kegerator conversion up and running. Part of the reason I went with the KEGCO kit was for the sealed tank. I could have scrimped and bought components and put it all together for less like others have mentioned, but I liked the convenience, and the coated tank. Kit Components 4 out of 5. They aren't the top of the line, but they are good enough for a starter kit.
Scritto da: Urbancountryi
initially, I ordered the wrong kit for my husband ...
initially, I ordered the wrong kit for my husband, I contacted the company, they stopped shipment of the incorrect kit, sent us this kit and my husband loves it. I am a former professional beer taster (yes, that is a thing) and my husband wants to up his home brew game. He is in process of building a draft system for both beer and nitro coffee. (and maybe some home made root beer for the kids) Will update once we have everything up and running
Scritto da: Nolan Echols
Missing parts
Kit came in missing the regulator. Easy to put together though. Ordered another regulator while waiting on response from the seller
Scritto da: Joel Harmon
Update, hooked up my tanks
I hooked my tanks up, I think there may be a problem with the regulator?! There were parts missing. This kit is for two taps, and the only hoses I got were for the co2. (Red hose) I ordered the extra hose I needed for an extra $15. And had them the next day. My kit also came with the plain aluminum tank. If I were gonna do it again, I would just piece it together. When you take your shiny new tank in to get it filled they are gonna want to swap it or you may have to leave it till they can get around to filling it. To me, it would have been easier, cheaper, and more convenient to just get the rental, and pay the deposit. Then all you are doing is swapping their bottles. Seals or valves go bad the supply store fixes it, and you just get another bottle and keep pouring. Picking up my kegs tomorrow from my local home brew store. I will try to give you an update, after I find my co2 leak. Hope this helps.
Scritto da: RedGenetics
Works great!
My husband bought this for his shop fridge and loves it! Easy to assemble and set up. Works great!
Scritto da: Danny W.
Five Stars
It seems to be very good quality made a home bar for a wedding came out great

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array