Hopkins 20099 Engager LED Test Break Away система с измервател на батерията

Brand:‎Hopkins Towing Solutions

3.7/5

lv
211.53

Hopkins Manufacturing Corporation прави изживяването ви при теглене по-лесно и по-възнаграждаващо чрез иновации и стойност. Като продукт за издръжливост от Hopkins, този продукт е проектиран за максимална издръжливост срещу сурови атмосферни условия, корозия и нормално износване. Hopkins предлага разнообразие от решения за теглене, включително комплекти за окабеляване на превозни средства, адаптери, конектори за превозни средства и ремаркета, системи за отцепване и много други. Днес повече от 40 процента от продажбите в категорията на дребно се генерират от иновациите на Hopkins. Променете начина, по който защитавате инвестицията си в ремарке със системата Engager Break Away! Неговият тестер за батерия с бутон ви уведомява, че вашата система за отделяне е готова за работа. Вграденото зарядно устройство зарежда батерията, докато е свързана с теглещото превозно средство. Системата като цяло включва превключвател за прекъсване, кабел и три монтажни болта. За използване с ремарке, оборудвано с до четири спирачки на ремарке. Включва акумулаторна батерия от 5 ампера 12 VDC. Комплектите за откъсване активират спирачките на ремаркето при отделяне от теглещото превозно средство. Повечето щати и провинции изискват комплекти за отделяне на ремарке. Свържете се с вашия транспортен отдел за пълна информация относно закона за теглене.

Цялата система включва кутия, батерия, зарядно устройство, 7 превключвателя и хардуер. Разполага с вградено зарядно устройство, което зарежда батерията, докато е включена в автомобила. Светодиодите показват кога батерията е напълно заредена, кога трябва да се зареди отново или докато се зарежда. Вграден измервател на батерията с LED тестови светлини. Активира спирачките на ремаркето при отделяне от теглещото превозно средство.
Brand ‎Hopkins Towing Solutions
Country of Origin ‎Taiwan
Customer Reviews 4.6 4.6 out of 5 stars 1,186 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎20099
Item Weight ‎4.2 pounds
Manufacturer ‎Hopkins Towing Solution
Manufacturer Part Number ‎20099
OEM Part Number ‎20099
Product Dimensions ‎7.25 x 4.5 x 5.25 inches

3.7

13 Review
5 Star
76
4 Star
15
3 Star
5
2 Star
1
1 Star
3

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Chuck V.
Seems to work good test button doesn't work
Seems to work. Test button to read battery doesn't work either manufacturer placed the button in the ring spot or the control board in the wrong spot either way works for the price
Scritto da: Don
direct replacement
as advertised, fast shipping
Scritto da: Amazon Customer
Great product and great fit to the trailer.. needs a better breakaway cable holder/housing.
Very easy to install and directions were perfectly written. the breakaway cable and holder/switch is not very stout and the cable is longer than needed for my application. The wires could have come with extra insulation considering the install is outdoors.. but I fixed everything and used a soldering iron and heat shrink to get everything more secured.
Scritto da: Marshall N. Valentino
used to replace a 20 year old system
I have two trailers with battery backup braking. They only get used two or three times a year but I hate having equipment that is not 100% operational. All of the wiring was a mess...the cheap splicing connectors were falling apart, wiring insulation was cracked and I had no idea if the battery was any good or the entire system operational. Hence my reason for purchasing the Hopkins 20099 system. The unsealed plastic case is the weakest part of the system. It allows water to seep in and the plastic mounting ears will deteriorate over time and break off. Since I have a large toolbox on the trailer I decided to mount it there. It'll be out of the elements and hopefully lengthen it's lifespan. Instead of using splicing connectors, I ran all wiring to a trailer wiring connection box. Any splices that were outside of the box were soldered and enclosed with shrink wrap tubing. I am considering adding a solar charging panel to keep the battery charged during periods of non use.
Scritto da: Tucker
Not a conductive grease
As several others have stated, this is NOT a conductive grease. I imagine it will keep away corrosion (as most any grease would), but it's sold as a grease that "improves" electrical connections. It does NOT improve them, it only (at best) helps maintain whatever connection you already have by reducing/elimating corrosion. IF you're looking for a conductive grease that actually improves electrical connections, look elsewhere. This product does NOT do that.
Scritto da: Forgivn
Great Product
This is an awesome product that works as advertised. Well worth a 5 star rating. However, as a 30+ year senior electronics technician on test and evaluation of the newest military fixed wing fighter/attack aircraft, I replaced their inferior nickel plated mounting hardware with about $20.00 worth of grade 8 bolts, washers, and self locking nuts; stainless steel machine screws, washers, and self locking nuts; and a couple of tubes of non-corrosive gasket maker to seal everything before mounting to prevent moisture from getting trapped between plastic and metal (which could cause rusting). NON-CORROSIVE SEALERS will not have that vinegary smell. Have a pail of soapy water (like you would mix for washing dishes) ready with a rag to wipe off any excess sealer after mounting. This same soapy water can also be used to smooth out the edge with your finger, to a professional look; just keep your fingers wet with the soapy water. If you immediately wipe off your hands with a clean dry rag, and sealer should easily come off. Then finish up by just washing your hands. It would have been nicer had this been designed with a door to cover the control panel; which is made of some type of vinyl and will most certainly deteriorate over time, in the sun, to the point it will become densely clouded and non-transparent.
Scritto da: Anathy Construction LLC.
Breakaway switch
Don’t know if it works until I need it to work battery and led display is a nice feature
Scritto da: BTR
Direct replacement for the older engager battery box
Had to replace old box because decal on frount came apart due to sitting in the elements here in oregon. Excellent price, comes with new battery.
Scritto da: Rudy S.
Great quality and value for money
Easy to install and reasonably priced
Scritto da: Martin Maurer
easy to install
I recommend this product, it's easy to install and it works fine. Simple if you have basic electric understandings.. there are just 3 wires, 12V from the truck to charge the battery, Ground and brake... brake away switch and 4 self tapping screw to put the box on the trailer and you're basically done with the installation..
Scritto da: SleepyFox
Great Product.
Great product for your trailer. You can quickly verify the condition of the battery, and diagnose potential wiring issues. This is extremely helpful when dealing with the CVSE, and scale personnel. Better presentation allows for a smoother and quicker inspections. I will purchase again. Installation was easy with the self-tapping screws provided. Included wiring diagram was detailed and easy to follow. Installation time will depend on your wiring skills and preferences. I prefer to use solder and heat shrink, so that would take longer than say butt connectors.
Scritto da: Don E.
Great for braking
Good replacement item
Scritto da: Jason E Forth
Easy to wire up
Used this as part of a conversion from hydraulic to electric brakes on my old boat trailer.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array