GoSports 500lb Equivalent Pool Deck Umbrella Anchor - постоянна земна котва за външни чадъри, сенници или леки струни - черно, бяло

Brand:GoSports

3.3/5

lv
178.11

GoSports Ground Anchor се монтира трайно в бетонни или дървени палуби, за да държи сигурно вашите външни чадъри и да замени големи обемисти стойки за чадъри (чадърите не са включени). Комплектът включва целия хардуер, необходим за монтаж на бетон или дърво (необходим е професионален монтаж, инструкциите са включени). Земният анкер може също да бъде закотвен в камък, тухла и плочки (хардуерът не е включен - консултирайте се с изпълнител). Инсталацията е постоянна, но минималистичният дизайн осигурява стабилна основа с малък отпечатък от 6,25 инча x 6,25 инча. Ground Anchor е съвместим с пазарни чадъри с кръгли стълбове с диаметър на стълбовете до 2,25 и комплектът включва две втулки за чадъри (1,5 инча и 2 инча) за по-добро пасване с по-малки чадъри. Също така може да се използва като земна котва за сенник или опорни стълбове за леки връвчици, така че да можете да надстроите своята външна жилищна площ. Висококачествената полимерна конструкция е практически неразрушима и устойчива на ръжда, за да издържи на всякакви атмосферни условия.

УСТОЙЧИВ НА ВЛОГИ: Първокласната найлонова конструкция е практически неразрушима и устойчива на ръжда, за да издържи на всякакви атмосферни условия. МИНИМАЛЕН ОТПЕЧАТЪК И ДИЗАЙН: Малък отпечатък от 6,25 x 6,25 инча с ненадмината здравина (надвишава 500 lbs теглене) в сравнение с традиционните претеглени основи. УНИВЕРСАЛЕН ПОДХОД: Побира пазарни чадъри с кръгли пръти с диаметър до 2,25 инча; Включва два ръкава за чадър (1,5 инча и 2 инча) за по-добро прилягане на по-малки чадъри; Съвместим със сенник и носещи стълбове за осветителни струни с диаметър до 2,25 инча. ПОСТОЯНЕН МОНТАЖ В ЗЕМЯТА: Монтирайте в бетонни или дървени палуби за басейни; Необходим е професионален монтаж (включени инструкции). 500 LB ЕКВИВАЛЕНТ БАЗА: Инсталирайте в бетонни или дървени палуби (включен хардуер), за да закрепите външни чадъри, сенници и стълбове за осветителни тела; Издържа до 500 lbs сила с малък отпечатък в сравнение с утежнените основи за чадъри; Основата тежи 3 lbs.
Country of Origin China
Customer Reviews 4.3 4.3 out of 5 stars 46 ratings 4.3 out of 5 stars
Item model number GROUNDANCHOR-BLACK-01
Item Weight 3 pounds
Manufacturer P&P Imports LLC
Product Dimensions 6.4 x 6.4 x 6 inches

3.3

8 Review
5 Star
66
4 Star
11
3 Star
13
2 Star
0
1 Star
9

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Bee Kirch
Stop and buy this stand!
This permanent mount umbrella stand solved several years of problems! I wish I’d found it sooner! I have a 10’ umbrella and live in the worlds windiest wind tunnel on the windy city. My deck is about 6’ off the ground and ai swear the wind funnels up at extreme velocity and destroys umbrellas. This small plastic mount came with a drill bit and bolts for concrete as well as very clear Instructions on how to install it on a wooden deck. It included two extra sleeves to fit different umbrella pole sizes and a nice cover to hide the bolt and hardware. It is rock solid. Stop shopping, just get this - stop letting your umbrellas fly away or topple the furniture.
Scritto da: Jose vazquez
Works great!
Has adapter for large and small umbrellas.
Scritto da: katep
Tightening bolts won’t line up
Unfortunately, when using the larger diameter insert the cover doesn’t line up with the tightening bolts due to the insert being too tall.
Scritto da: Donna Underwood
Works great.
Umbrella is secure.
Scritto da: Steve D.
Strong direct to slab mount.
I mounted this on my patio to block the neighbors 2nd story window view into my backyard using a tilting 10’ umbrella. We get wind nearly every day here in So Cal and the umbrella has never once blown out of the mount. I am ordering a second one that I will mount on a precast footing and bury with only the mount showing. You do have to drill the holes precisely to line up. I found my concrete bit drifting when starting and 1 hole is not aligned. Highly recommended!
Scritto da: maja
Not as intended, but works well
The media could not be loaded. Technically, this umbrella stand is to be screwed into the concrete of your patio. However, I decided not to use it in this way. Therefore, I simply buried the inner part of the stand in the grown and it works just fine like that. It has worked out really well for working outside while staying cool.
Scritto da: T. Philbrick
Great anchor, solid hardware, accommodates varying poles, foot room, not aesthetically pleasing.
Let's get the ugly out of the way first, because there is plenty to like about this. It's just not that nice to look at. We have black furniture on a light grey deck and this looks like a white, upended cup under the table. Are other's going to spend their time admiring or ripping on your umbrella anchor? More than likely, no. But this is what you'll be looking at, so either way, take it in and make your choice. Also, you need to know that you are deciding to permanently (relatively speaking) put your table and umbrella (or at least your umbrella) in a single (one) location on your deck or patio. This thing bolts into place with very aggressive bolts. I am very impressed by this hardware by the way. It's probably over engineered. With this said, you no longer have to store or haul out your 50+ pound umbrella anchor anymore. So, pick the very spot you plan to install this umbrella for the foreseeable future. Open up the bag of screw options. See they went the extra mile and covered most everything. We don't have cement decking, so went with the wood installation. If we ever convert, we have the hardware :) The instructions are VERY well laid out. For such a lost art, this was refreshing. There are instructions for both cement installation, as well as wood (or similar) decking. I marked the holes, predrilled the holes (look, don't skip this step...if you crack your deck and complain later, it's going to be obvious you skipped this step), zipped down the bolts, ...ok ok, I DIDN'T follow all the directions and ended up installing and removing the hand screws three times. 30 seconds of reading could save you a few minutes of repetitious work. Chose the insert that fit my umbrella's pole and dropped the outer cone over everything. Finally, and correctly, moved the table into place, dropped the umbrella through the table and into the anchor, and screwed in the last two hand screws to bite into the pole, securing it in place. I don't believe this umbrella will be going anywhere. So again, it's not the nicest thing to look at, but it's at your feet. And speaking of feet, there's now more room. As in, inches all around. And no one is tearing a muscle storing the heavy anchor for the winter. Honestly, I think this is staying put until we decide we don't want to look at it anymore or the deck fails where it's attached. Pretty sure the anchor isn't going to be the thing that fails. Again, this appears to be really well engineered. Time will tell. At this point, this is a recommend - after you have decided on it's aesthetics. Have a look at the images.
Scritto da: A. Reader
Great!
If you are looking for an anchor to but on your patio or deck, under a table, this is perfect. Simple installation, with instructions, and awesome that it can even go into the concrete! However, if you want to be able to move it around or put it in the ground, it’s no good. It does state that, so it’s not misleading, just throwing it out there since we were looking for something to go in to dirt and gave it a try. It definitely didn’t work lol Also, aesthetically speaking, it’s not cute. That’s why I say it good for under a table or something, as it doesn’t take up much space but you do want to hide it! But overall, if you are looking for a sturdy anchor to put in wood or concrete, this is fantastic!

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array