Гайка за колело Dorman 611-306 M12-1.50 куполообразна гайка - 19 mm шестостенна, 37,6 mm дължина, съвместима с избрани модели Ford / Lincoln / Mercury, 10 пакета (OE FIX)

Brand:‎Dorman

3.2/5

lv
220.05

Тези гайки за колела са изработени от въглеродна стомана и са тествани според взискателните стандарти на автомобилната индустрия, за да осигурят здравина, дълготрайност и безопасност. Тази част е съвместима със следните превозни средства. Преди да закупите, въведете облицовката на вашето превозно средство в инструмента за гараж, за да потвърдите монтирането. [Ford Fusion: 2010, 2011] - [Lincoln MKZ: 2010, 2011] - [Mercury Milan: 2010, 2011]

Уверете се, че пасва - за да сте сигурни, че тази част пасва точно на вашето превозно средство, въведете вашата марка, модел и ниво на оборудване в инструмента за гараж. Качествен инженеринг - проектиран в Съединените щати и подкрепен от десетилетия опит в следпродажбеното обслужване на автомобили. Напълно тестван - частта е преминала тестове за проверка на натоварване, солен спрей, твърдост и проверка на резбата, за да отговаря на строгите стандарти. Устойчив на корозия - чрез премахване на фурнира на OEM дизайна на гайката няма шанс влагата и ръждата да го накарат да се издуе и деформира. Подобрен дизайн - директна подмяна, дизайн на гайката от една част, срещу фабричен дизайн от две части, който често води до преждевременна повреда на гайката на колелото.
Brand ‎Dorman
Country of Origin ‎China
Customer Reviews 4.2 4.2 out of 5 stars 50 ratings 4.2 out of 5 stars
Drive System ‎External Hex
Exterior Ready To Paint If Needed
Exterior ‎Ready To Paint If Needed
Fastener Type Acorn
Fastener Type ‎Acorn
Finish Type ‎Painted
Inside Thread Size ‎M12
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎4.81 x 3.63 x 2.19 inches
Item model number ‎611-306
Item Weight ‎1.3 Pounds
Manufacturer ‎Dorman Products
Manufacturer Part Number ‎611-306
Material Steel
Material ‎Steel
Metal Type Carbon Steel
Metal Type ‎Carbon Steel
OEM Part Number ‎AE5Z 1012 A; BE5Z 1012 A
Product Dimensions ‎4.81 x 3.63 x 2.19 inches
Thread Size M12-1.50
Thread Size ‎M12-1.50

3.2

9 Review
5 Star
67
4 Star
13
3 Star
3
2 Star
6
1 Star
11

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Michael H.
Has aluminum overcap.
Product was as described. Would have preferred a solid lug nut. As the aluminum overcap deforms leading to rounded flats. Which was my reason for the purchase.
Scritto da: RUTH LOMBARDO
Wheel Nut Set
Worked perfectly for my 2011 Ford Fusion.
Scritto da: rja432
They work, but are cheap
They fit fine but I'm not pleased with the fact that several of the Caps have already come loose. A single piece wheel nut would be so much better. These are Overpriced for what you get, but much less expensive that the Ford dealer.
Scritto da: Cliff B
Worked well with the Ford hubcaps
These Lugnuts were perfect and worked well with the factory Ford fusion hubcaps that are held on by the Lugnuts a little expensive but they did work
Scritto da: Veho123
Worked as advertised. I went through many sets, ...
Worked as advertised. I went through many sets, lots of $ trying find these specific nuts as the shank had to be long enough and the head had to have the chamfer wide enough to hold the plastic hubcap. Carid popped up on my FB one time. I hit it on a whim and found it fit 2005 Ford Fusion.
Scritto da: Mark A.
get them if you are in a pinch, but expect to get OEM replacements
For those that have 2010 Ford Fusion with 5 spoke steel rims, which use hubcaps, these are the lug nuts you are looking for. They look like OEM. I took them to Costco to replace a couple of damaged, worn and replaced lug nuts. Of the 10 that were installed, I believe 6 of the caps ( shiny part that encloses the bolt) fell off: 2 of them when they installed them, 2 of them when I drove home and 2 more over the last couple of weeks. They cost ~ half price from OEM. They do the job, but I would not recommend them. Now my bolts are exposed to the weather.
Scritto da: Joseph A. Maisano
Best deal can find on uncommon nut
Bought for Ford OEM center attached hubs for my plain steel winter wheels. Don't like not a solid (it's capped) design but in the 10 pack way more affordable over dealer.
Scritto da: Ed
I received a replacement package of ten at no cost provided I return the good ones as well as the bad ones
I installed these by hand and torqued to the specified torque. Within several weeks one of the caps was missing and another was almost off. I received a replacement package of ten at no cost provided I return the good ones as well as the bad ones. Since then another cap is missing and another is partially off. The worst part is that when the cap is off it requires a 18 mm wench to remove. My tire wench only has 17 & 19 mm so I need to use a breaker bar with 18 mm socket. Not something that I usually carry in my car so if I have a flat I'd be out of luck. This is a poorly designed cap as the original OEM version rolls the cap around the inside bevel of the nut to keep it on. At least with the original version the caps stayed in place and you could get the nut off with a normal non-metric tire tool. Amazon is now bugging me to send the other replacements back. I'll be sending all of them back as soon as I find another replacement. Then I'll find out how well Amazon is with returns.
Scritto da: uncle buck
Great solid design
Much better than the OE factory lug nuts that are easily susceptible to deforming their shape. These are much better, more solid design

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array