Forney 75535 Месингов фитинг, втулка, 1/4-инчов женски до 3/8-инчов мъжки NPT

Brand:Forney

3.5/5

lv
56.56

Женската втулка Forney 75535 NPT 1/4-инча X 3/8-инча мъжка NPT е изцяло месингова втулка за маркуч за въздух. Устойчив на ръжда и няма да корозира толкова лесно, колкото други материали. Forney Industries е една от най-дълго действащите семейни компании за металообработващи продукти в Америка. Основана през 1932 г., Forney предлага повече от 5000 продукта за пазара на хардуер, автомобили, ферми и ранчо и направи си сам. Ако имате въпроси за обработката на метали, ние имаме отговори. Бяхме ангажирани с вашия успех, независимо от размера на местоположението или нуждите. Втулка женски NPT 1/4-инча (6,35 мм) X 3/8-инча (9,53 мм) мъжки NPT. Изисква се доказателство за покупка. небрежност, небрежност или злополука, или която е била използвана по какъвто и да е начин, противоречащ на предназначението.

Месингов фитинг. Устойчив на ръжда и няма да корозира толкова лесно, колкото други материали. Изцяло месингова втулка за маркуч за въздух с женски NPT и мъжки NPT краища.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Forney
Brand ‎Forney
Color Brass
Color ‎Brass
Connector Type Bushing
Connector Type ‎Bushing
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 306 ratings 4.5 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Brass
Exterior Finish ‎Brass
Finish ‎Brass
Included Components ‎Forney 75535 Brass Fitting, Bushing, 1/4-Inch Female to 3/8-Inch Male NPT
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 0.78 x 0.75 x 0.75 inches
Item Dimensions LxWxH ‎0.78 x 0.75 x 0.75 inches
Item model number ‎75535
Item Package Quantity ‎1
Item Weight ‎0.634 ounces
Manufacturer ‎Forney
Material Brass
Material ‎Brass
Measurement System ‎standard
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎75535
Product Dimensions ‎0.78 x 0.75 x 0.75 inches
Thread Type NPT
Thread Type ‎NPT
Warranty Description ‎90 day warranty against manufacturer defects

3.5

13 Review
5 Star
75
4 Star
9
3 Star
8
2 Star
1
1 Star
6

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Dan S
Precisely machined, perfect fit
Very nice threads, perfect
Scritto da: Sergio Torres
Fit my air compressor but bends easy
Bought this item for my air compressor hose reel and it fit perfectly but as i was tightening it in place, i hadnt noticed it began bending and warping. I was tightening it using a crescent wrench. Guess i dont know my own strength because it bent to the point where i cant screw anything in anymore. Tried using a clamp to fix the bend but nothing is fixing the thread alignment anymore. Will be ordering another one but ill treat it like a princess.
Scritto da: William R. Havens
Uuuummmmmm
More than likely if you are looking at this then you understand what it is and all that "fancy" talk in the description. It's brass and it is the size it says it is, if it wasn't then why would it say it was.
Scritto da: Chuck
Worked perfect for my application
Needed this exact size this fit the bill fast delivery
Scritto da: TkjTkj
Good product.
Good product ... (Note: NPT does NOT stand for 'National Pipe Thread' ... it DOES stand for 'National Pipethread Tapered' .. --- My Criteria: 5-star: does the job well, with extra advantages 4-star: does the job well 3-star: helpful but doesn't accommodate all needs that one would expect 2-star: sketchy performance at best 1-star: they showed up for evaluation
Scritto da: Jeff
For what it is, it's machined well and seems ...
For what it is, it's machined well and seems to be a very hard brass. The inner is an NPT 1/4" thread and the outer is an NPT 3/8" thread. I can't use it because I didn't realize the threads I was threading this into were 3/8" (non-NPT). Oops, I'll just put this in my parts bin in case I need it some day, it was cheap enough.
Scritto da: Karlee LaFountain
Quality part
Bought it for a Hitachi roofing nailer. Fits great and doesn't leak. It is brass. It also came with a hand written note thanking me for the purchase. Overall, very happy with the quality, quick shipping and hand written note.
Scritto da: Amazon Customer
As desribed
Used for some air tools worked great. Would buy again.
Scritto da: Richard B. Barnaby
Works as intended
I used this to convert my pressure wand from 3/8 to 1/4. Just what I needed. Could not find this anywhere so I was very happy to see it on Amazon
Scritto da: Paulo
Didn't work for me
Did not work for me threads are not for propane
Scritto da: Ray Lelieveld
Works as described
Works as described
Scritto da: DanO
It fit my BBQ hose!
Arrived quick, had no problem installing!
Scritto da: Maxime S
Good quality
Good quality

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array