EKLIND 54950 5 MM Шестостенна T-образна ръкохватка с възглавница Шестостенен гаечен ключ

Brand:Eklind Tool

3.8/5

lv
56.32

EKLIND TOOL COMPANY е водещ американски производител на висококачествени шестостенни ключове с промишлен клас, произведени с гордост в САЩ от 1950 г. Шестостенният ключ EKLIND 54950 5 MM Cushion Grip T-Handle T-Key отговаря на най-строгите изисквания на професионалните механици, търговци, майстори „направи си сам“ и любители.

ОТГОВАРЯ ИЛИ ПРЕВЪРШВА ВСИЧКИ ПРИЛОЖИМИ СТАНДАРТИ - Инструментите на EKLIND отговарят или надхвърлят стандартните разпоредби, посочени в ANSI, ASME, RoHS, REACH, CA Prop 65 и законодателството за конфликтни минерали на Дод-Франк. ИДЕНТИФИЦИРАЙТЕ ВАШИТЕ ИНСТРУМЕНТИ - Метричните размери са цветно кодирани в синьо, така че можете бързо да достигнете до правилния инструмент. EKLIND CUSHION GRIP T-KEY - Ключове, които имат по-дълги оси, за да осигурят допълнителен обхват и лост, гладките винилови дръжки са удобни и устойчиви на плъзгане, подреждат се добре и са организирани в торбичка за компактно съхранение, дори в кутията ви с инструменти. ШЕСТОГРАФЕН КЛЮЧ EKLIND T-HANDLE - Получавате допълнителен обхват и допълнителен лост с по-дългите оси на ключовете. ОПТИМАЛНА ЗДРАВИНА- Тези инструменти EKLIND са изработени от легирана стомана EKLIND, която е топлинно обработена, охладена и темперирана за оптимална здравина, въртящ момент и пластичност за безопасност и е покрита с устойчиво на ръжда покритие. Шестограмните ключове EKLIND (шестограмни ключове) се използват за задвижване на крепежни елементи с вътрешен шестоъгълник (шестограмна глава). Дължина на вала=9 инча, ширина на дръжката=4 инча. ПРОИЗВЕДЕНО В АМЕРИКА - Висококачествени професионални инструменти от промишлен клас, произведени в САЩ.
Brand Eklind Tool
Color Multi
Country of Origin USA
Department Unisex-Adult
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 1 x 1 x 1 inches
Item model number 54950
Item Weight 1.6 Ounces
Manufacturer Eklind
Material Blend
Product Dimensions 1 x 1 x 1 inches; 1.6 Ounces

3.8

11 Review
5 Star
80
4 Star
13
3 Star
5
2 Star
1
1 Star
1

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Grillmantom
Perfect if you need it
Got this for my bikes disk breaks worjs just fine
Scritto da: Brent
It’s an allen head
It fit my 5mm allen head!!
Scritto da: Joe-bob product tester
Durable works great on Rhino Rack Vortex bar holders.
Works great on Rhino Rack cross bars. I cranked very hard on these "farmer tightening" some bolts and I didn't see any wear or twisting on this tool. Very durable. Much cheaper than buying the replacement Rhino Rack tool, and this one is much longer as well.
Scritto da: Nathaniel Allen
Dead simple, l-o-n-g hex wrench, cheap handle...
Gosh, my title says it all. I searched out and bought this particular hex wrench to ease the installation and removal of a Yakima Railgrab-based roof rack on my car. Standard length 'L' 5mm interfere with the cross bars when I turn them; the 9-inch shank on this one clears the ends of the crossbars so I can spin the handle freely. For what it is -- something that will live in my trunk and see use only infrequently -- it's petty to note the cheesy handle. But because the "cush grip" is mentioned in the product title, I'll just add that I have hex wrenches in my shop with much more comfortable grips -- some overmolded plastic, others simply plastic-dipped bar stock. This, by comparison, is only marginally nicer than your standard 'L' key. But you've already probably figured out as much by looking at the product photo. And in all actuality, for my occasional purposes, it doesn't much affect the use of this tool one way other the other. If I had it at my bike work station where it would be in use constantly, that would be a different story.
Scritto da: Dallas B.
Works like a champ for Yakima roof towers…
So I lost the original wrench for my roof towers. This is such a nice replacement. May be the best five bucks I ever spent. Must have for Yakima rack owners. Very happy.
Scritto da: fishing fanatic
What I needed for a car job
This is what I needed to finish work on my transmission job for Nissan Versa Note. Just a bit flimsy but it had enough torque to get the nut loose and back in place.
Scritto da: Dion
Eklind T-handles are top-of-the-line.
These are made of good steel, so they don't round off too easily. If you do manage to round off the smaller ones (say, less than 4mm), they can be repaired by merely cutting off the lowest eighth inch with an abrasive wheel.
Scritto da: Mr.Dan
It’s a hex key, duh!
What do I like about this product? It’s a 5mm hex key, and that’s what I wanted, so I like it. I needed to change the wheels on my daughters scooter, and out of all the hex keys I already own I had zero. So I bought these. Do I really have to continue the story? Can’t you figure out the ending? Fine then. So, I got the hex keys, changed the wheels, and now I’m a hero. Amazon packaging was a mess (bubble envelope about 6 times too large), but I’m not including that in the start count; just passing on the info.
Scritto da: A.C.K
Great Tool
Gets in tight spots easily with the help of flash light easy to open n close hex bolts.
Scritto da: MAXIM LUBINSKI
Great product. Good price.
Great product. Good price.
Scritto da: MR GRAHAM HARLAND
Five Stars
long reach makes the job quicker, increases the torque and gets to less accessible heads

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array