Eastman 1-1/2 инчов лост за оттичане на вана и преливник, месинг с хромирана облицовка, 35201

Brand:Eastman Outdoors

3.2/5

lv
193.59

ОПИСАНИЕ НА ПРОДУКТА Опростете водопроводните си проекти с подмяната на сифона за вана Eastman. Съставен от здрав и здрав калибър 20, този издръжлив капак за дренажна тръба за вана пасва на повечето канали със стандартни размери, за да позволи лесен монтаж, и разполага с хромирано покритие, което се съчетава чудесно с модерни декори за баня. ОТ ПРОИЗВОДИТЕЛЯ Комплектът за отпадъчни води Eastman с два отвора за баня е проектиран да пасва на вани със стандартен размер. Разполага с 1-1/2 месингови тръби с размер 20 за здрава връзка. Този комплект се предлага с дренаж 1-1/2 и хромирана облицовка за елегантен и модерен външен вид.

СЪВРЕМЕНЕН ДИЗАЙН: Протекторът за оттичане на баня се отличава с елегантна, модерна хромирана облицовка, която се съчетава чудесно с широка гама от декори за баня. КАКВО Е ВКЛЮЧЕНО: Комплектът за монтаж на дренаж за вана включва (1) дренаж 1-1/2 инча, (1) преливна плоча с два отвора, (1) запушалка с лост и (1) месингова цедка. ИЗДРЪЖЛИВ: Капакът за оттичане на ваната е съставен от месинг 20 калибър за дълготрайна надеждност. УНИВЕРСАЛЕН: Уловител за косми на сифона на ваната се побира с лекота на повечето сифони на вана. ОТТОЧИТЕЛ ЗА ПРЕЛИВНИК ЗА ВАНА: Сифонът за преливник за вана е перфектен за улавяне на отпадъците от банята и е отлично допълнение към вашите принадлежности за вана или душ.
Batteries Required? ‎No
Brand Eastman Outdoors
Color Trip-lever
Color ‎Trip-lever
Customer Reviews 4.1 4.1 out of 5 stars 166 ratings 4.1 out of 5 stars
Included Components ‎trip lever
Item Dimensions LxWxH 12.7 x 5.3 x 3.6 inches
Item model number ‎1-1/2 Inch
Item Package Quantity ‎1
Item Weight 1 Pounds
Item Weight ‎1 pounds
Manufacturer ‎Eastman
Material Brass
Material ‎Brass
Part Number ‎35201
Product Dimensions ‎12.7 x 5.3 x 3.6 inches
Size ‎Trip Lever Bath Waste and Overflow Drain
Style ‎Brass Bath Waste Kit

3.2

8 Review
5 Star
59
4 Star
17
3 Star
9
2 Star
6
1 Star
9

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: rj
good value
good value for money, long as you know you're prepared to lengthen it with a rubber coupler, or another copper tail pipe. then there's leaks, you need to use extra teflon tape on all joints. you can also use silicone gel. It look me at least 10 tries until I finally got every single joint leak proof all the way to the U trap. a pro plumber will likely just trash this, consider time is money, and they'll just charge you $500 or more for the job. for DIY, it's definitely well worth the money, long as you don't mind putting in more time to figure out the kinks as mentioned above.
Scritto da: Brian white
Good quality product
Solid brass good quality product. A must when doing a renovation of an old bathroom
Scritto da: Mike G
The lower horizontal pipe will probably leak at the tub side but it can be corrected.
As others have already stated, the lower horizontal brass pipe will probably leak at the joint where it connects to the shoe (tub drain mount) but it can be corrected. FYI, get the tube wet and hold your hand over one end of the tube while blowing air with your mouth into the other end ("it's still clean at this point"). You will probably notice air/bubbles from the joint. Anyway, I had already cleaned the brass and was going to just solder the sections together but while trying to remove the "press fit", I discovered that contrary to what other have indicated in reviews, this is not a press joint but is actually a tightly screwed in threaded joint. I was able to grip the two sections in my hands and unscrew them by giving it all I could while flexing them back and forth. There doesn't appear to be any joint compound or tape so it's no wonder it leaks. I wrapped Teflon tape on the threads, reassembled it tightly and the leak is now gone. It's a shame that you have to do anything to a brand new part but this does make it work in a permanent manner without resorting to JB weld, solder or returning it for something else. The brass material and other parts seem to be of good quality although the overflow tube is about 1/2" shorter that my old tube and the strainer bolt is just long enough to catch but they still have enough length to work fine. I think it's still a better solution than a cheap plastic version and it's more affordable than the other brass offerings so for those reasons I would buy it again and just know that some additional tape will be needed.
Scritto da: Lazlo Homer
Warning, shallow tub only.
Looks like a quality product in spite of it's Chinese origin. No nasty solder joints and whatnot. Problem is if your overflow is more than 12" high (as most are these days) the vertical pipe is way short. Too bad.
Scritto da: Teresa
Need to contact seller. The pipe is too short
Need an extension for the overflow/stopper pipe. Would like phone number to inquire about an extension
Scritto da: Jerry Vandervort
Item was just as advertised
Well made. Worked as it should
Scritto da: Erica
Box was broken apart when received and the shoe leaked
Sad that it leaks from a non user install area. Meaning it’s not anything an installer could control. It’s supposed to be solid and cast where it is leaking. I just need Amazon to ship a replacement shoe because I don’t want to uninstall the whole thing.
Scritto da: MAGstar
Easy!
It was much easier to install than I thought it would be. It was virtually identical to the original.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array