CURT 55513 Персонализиран 4-пинов кабелен сноп за ремарке от страната на автомобила, Изберете Toyota Tacoma, T100, Hilux, черен

Brand:CURT

3.8/5

lv
175.69

Ако вашето превозно средство не е оборудвано с окабеляване за теглене на ремарке, персонализираното окабеляване CURT е идеалното решение. Персонализиран кабелен сноп - наричан още T-конектор - е просто електрическо устройство с възможност за включване и пускане, което се включва във вашата автомобилна електрическа система и осигурява стандартна универсална кабелна връзка за ремарке. Това се прави с помощта на два или повече специфични за автомобила OEM-съвместими конектора за включване в модула на задните светлини, елиминирайки необходимостта от рязане, снаждане и запояване по време на монтажа. Персонализираните кабелни снопове са изработени специално за превозното средство и въпреки че не са налични за всички превозни средства, те предлагат един от най-бързите, най-лесните и най-сигурните начини за окабеляване на превозно средство за теглене. Този конкретен кабелен сноп осигурява 4-посочен плосък конектор и е проектиран да бъде персонализиран кабелен сноп, който да пасва на определени години на Toyota Tacoma, T100 и Hilux (за да проверите съвместимостта на вашия автомобил, вижте информацията за приложението). Предлага се с всички необходими компоненти за окабеляване за установяване на надеждна връзка за окабеляване на ремарке, както и капак за прах, за да поддържа конектора чист, когато не се използва. Имате представа за следващата си дестинация - може би това е лодката, която акостира на любимото ви място за риболов, може би това е къмпинг, който гледа към един от шедьоврите на природата, или може би това е следващото голямо работно място. Превръщането на тази картина в реалност обаче изисква повече от просто мечтание. Необходима е стабилна връзка и точното количество мощност. Персонализираното окабеляване CURT е направено с някои от най-сложните технологии в индустрията и е проектирано да се инсталира с лекота, като ви осигурява дълготрайна електрическа връзка за вашата настройка на теглич.

Няма налични единици
ПРАХОПРАШИТЕЛ. За насърчаване на дълготрайна употреба и устойчивост на атмосферни влияния, този 4-полюсен кабелен сноп за осветление на ремарке се предлага с гумено покритие против прах. Лесно се побира върху 4-пътния плосък конектор, когато не се използва, като го предпазва от външни елементи. НАДЕЖДНА МОЩНОСТ. Този 4-посочен кабелен сноп за ремарке е изграден с технология за повърхностен монтаж. Този тип схеми генерират по-малко топлина, оптимален интензитет на светлината и издръжлива работа. СПЕЦИФИЧНО ЗА АВТОМОБИЛА. Този следпродажбен кабелен сноп за превозно средство-ремарке е проектиран за избрани години на Toyota Tacoma, T100 и Hilux. СТАНДАРТЕН КОНЕКТОР. Това 4-плоско окабеляване за ремарке може да се използва за свързване на задни светлини на ремарке, светлини за спирачен сигнал и мигачи. 4-пътното окабеляване на светлините на ремаркето е популярно при различни ремаркета, като добавя разнообразни опции за теглене за вашия автомобил. ЛЕСЕН ЗА МОНТАЖ. Без рязане! Без снаждане! Този комплект окабеляване на ремарке се включва към съществуващото фабрично окабеляване на вашето превозно средство и го оборудва със стандартен 4-пинов заден съединител за окабеляване на ремарке за включване и теглене на ремарке.
Brand CURT
Brand ‎CURT
Customer Reviews 4.7 4.7 out of 5 stars 1,008 ratings 4.7 out of 5 stars
Exterior ‎Machined
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎55513
Item Weight 0.91 Pounds
Item Weight ‎14.6 ounces
Manufacturer ‎CURT
Manufacturer Part Number ‎55513
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎55513
Product Dimensions ‎9 x 4 x 3 inches

3.8

13 Review
5 Star
84
4 Star
10
3 Star
4
2 Star
2
1 Star
2

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: MH
Easy install, good value
I’m not a mechanic, and this was still easy to install. Took no more than 30-45 minutes going slowly and methodically. Fits the Toyota Tacoma 2005-2015 perfectly and has worked well for me. Would recommend if you don’t want to splice wires.
Scritto da: Capt Jay
Easy Install
I would go for 5 stars, BUT the double sided patch they provided was all dried out and worthless. Ugh.. I had to jump through hoops to secure the module inside the twilight box.
Scritto da: Mustafa Al azzawi
Quality
It is really easy to install and very good for the value but the quality of the wiring not that good but overall I haven’t had an issue with it works well
Scritto da: Ian from the north
Easy install
Perfect fit 2014 Tacoma. Super easy to install and works great.
Scritto da: Jeffy T
Doesn’t get much easier than this!
Clean off some paint, drive a self tapper in for ground, zip tie the slack, plug and play from there! I HATE cutting factory wiring, this was the answer!
Scritto da: Atmosfera
OEM quality
I loved how easy to install this harness was. It is now installed into a Mexican Toyota Hilux 2017. Every connector fits without a problem. The instructions on how to replace it are great. My recommendation is for you to get a tester to keep in the truck for future usage. It only adds a couple of dollars to the setup. Great product!!
Scritto da: DownTown
Install was a breeze
Watched YouTube video on the install and it was very easy. 20 min and I was done.
Scritto da: Tranche
Perfect!
Installed on a 2014 Tacoma after waiting approx. 1 month for Curt to confirm (in their application chart) that the T-Connector for the 2013 Tacoma also fits the 2014. It does! And the quality of this harness is first rate, including the connectors which appear to be identical to the Toyota OEM. Just a few suggestions to improve the installation experience: First, there's really no need to drill a hole to attach the ring terminal ground. Inside the left tail-light housing, there are 3-4 machine screws (ends) attaching the metal housing to the truck body. You need only use one to attach the ring terminal; I used the upper right with a nut and lock washer I supplied. I tested this ground location with a meter and found that it's solid. No drilling. A second suggestion would be to add wire conduit to all three branches of the T. While not required, I believe this upgrade improves the integrity (and certainly the protection) of the wiring and conforms with the OEM wiring in the vicinity of the T-Connector. If you do install conduit, do this BEFORE you plug in and route your wiring. Much easier this way. You'll need approx. 10 ft. of 3/8" or 1/2" split seam conduit; I used Dorman #86651 @ $6 (approx.). Seal conduit ends with electrical tape. Finally, as this T-Connector supplies a flat-4 connector to the trailer, I suggest that you include the Curt 58001 bracket to attach this connector to your receiver tube. It's inexpensive and fits perfectly. 7/28/14 Edit. While I certainly maintain my 5-star rating of this T-Connector, I've found that, over time (6 mos.), one minor flaw presents. The double-sided adhesive strip that's intended to hold the converter box in place loses its adhesive holding power. No worries; the fix is easy: Just replace with similar sized "industrial strength" Velcro. (I recommend 3M Dual-Lok. Very strong and inexpensive.) Cover the entire back of the box with the Velcro and attach to a (preferably) smooth and clean vertical sheet metal surface. (I had no trouble finding this.) If I were on the Product Development Team at Curt, I'd recommend a redesign of the box to include two (2) mounting ears through which sheet metal screws could be used to attach the box -- again, to a non-structural non-frame vertical surface.
Scritto da: canuk54
Fit perfectly on a 2010 Tacoma
This replaced one installed incorrectly by a nearby Truck and Van shop. It was very easy to install, less than twenty minutes from start to finish and works great. It has been installed for 5 months through rain etc with no issues. The last one was installed with the box below the truck bed, making it open to the elements and it didn't last through a Canadian winter before shorting out the brake lights and causing me to not be able to put my truck into gear. After being towed to a garage and having the cause pinpointed to the incorrectly installed trailer wiring, which was removed, all was good. This unit was recommended to me by the repair garage.
Scritto da: R. B. Clarke
Liike original equipment
Name brand and really good instructions Took about 20 minutes and looks like an OEM product which I think it is Solid construction, and only had to drill one small hole for the ground wire , screw incldued Worked like a charm
Scritto da: Amazon Customer
Works perfect.
Super easy to install. Works perfect for my trailer
Scritto da: Chris B
Easy to install
Easy to install, put on a Tacoma that’s always pulling boats out of the water. Holds up no problem
Scritto da: Jarett Miles
easy to install
Quality product, easy to install.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array