Bosch 1/2 инча X 6 инча Свредло за зидария с перфоратор с шестостенна опашка LBHX010

Brand:BOSCH

3.6/5

lv
59.43

Ударните свредла за зидария на Bosch с шестостенна опашка осигуряват 4 пъти по-дълъг живот в сравнение със стандартните свредла за зидария и са преработени с шестостенна опашка за използване в ударни бормашини и ударни винтоверти. Тези свредла разполагат с асиметрични диамантено шлайфани карбидни накрайници, които осигуряват бързо пробиване и по-дълъг живот на свредлата при ударни бормашини и ударни винтоверти. Накрайниците са предназначени за прецизни стартове и по-малко ходене. Главите на битовете са произведени от изключителен твърд сплав, произведен от Bosch. Имат фрезовани U-образни канали с дълбоко изрязани спирали за бързо пробиване в блокове, зидария и бетон. Шестоъгълната дръжка осигурява агресивна сила на захващане.

Няма налични единици
Фрезовани U-образни канали с дълбоко изрязана спирала – осигурява бързо отстраняване на материала. Изключителен твърдосплав, произведен от Bosch – осигурява изключителна издръжливост при големи натоварвания. Подобрена шестостенна опашка – позволява използване в ударни винтоверти и ударни бормашини/винтоверти за допълнителна гъвкавост. Асиметричен диамантено шлифован карбиден връх – позволява бързо пробиване и по-дълъг живот на свредлото. Свредло за зидария с твърдосплавен връх с подобрен дизайн на шестостенна опашка – проектирано да осигури дълъг живот на свредлото и бързо отстраняване на материала.
Batteries Required? ‎No
Brand BOSCH
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 198 ratings 4.6 out of 5 stars
Included Components
Item model number ‎LBHX010
Item Package Quantity ‎1
Item Weight ‎0.01 ounces
Manufacturer ‎Bosch
Material Diamond
Material ‎Diamond
Package Dimensions ‎7.87 x 1.77 x 0.43 inches
Part Number ‎LBHX010
Shank Type Hex
Surface Recommendation Alloy Steel
Tool Flute Type Spiral

3.6

11 Review
5 Star
73
4 Star
15
3 Star
9
2 Star
2
1 Star
1

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Bob K
Worked great, no problems
I needed to drill a 1/2 in by 5 in hole in some concrete, for an anchor. I have a couple of regular drills, an impact driver, and a hammer drill. Because this has the 1/4 shank that looks like it fits an impact driver, I thought I'd give it a shot first.... It's not the fault of the drill bit that the impact driver didn't perform well, but the purpose of the 1/4 shank is lost if an impact driver isn't appropriate for the task. I knew that the "regular" drills would be a waste of time... which is why I bought the hammer drill. I was concerned about using the hammer drill with this bit. Other 1/2 bits that resemble this one, shred when they're put between the hammer drill and concrete. The other bits are only useable for a couple of inches before the stress causes them to fail. This bit performed very well.... and produced a very nice hole. Upon examination, it appears the "teeth" have suffered very little (if any) damage and will live in my tool box until the next time I need such a hole.
Scritto da: Thomas Marrone
Rapid cutting through cinder block.
Had several holes (10) to drill through residential cinderblock walls. This bit cut through all ten. It's a little scuffed but head looks ready for many more.
Scritto da: aolshove
Man, this thing went dull quick.
I recommend using this with water or something. When I used it with aggregate concrete, the rocks just stopped it cold. I barely got two holes out of this bit before I quit and decided that two holes is enough.
Scritto da: randolph v.
On time
Nice bit fit perfect
Scritto da: DaleDapkins-2timewinner of LorianHemingwayShortStoryCompFirstPrizein TennWilliamsShortStorycomp.
it works
it works
Scritto da: Amazon Customer
Made it through 2-1/2 holes
Drilling four holes to mount something in garage floor. Each one about 2” deep to put in drop in anchors. Stopped working half way into the third hole. Had to finish using older smaller bit to drill to depth and use this one to make them correct diameter. Used hammer drill that is 2500 rpm max and held trigger about half way to stay under rpm guidance.
Scritto da: G
Fantastic
High quality auger. Went through 12 inches of pressure treated lumber like a knife through butter. Would definitely purchase again.
Scritto da: Norberto Sanes
Barreña para concreto
Muy practica y útil.
Scritto da: pazoo
Decent bit with obvious limitations.
Bought to try drilling holes in concrete with my dewalt impact driver, I have a proper SDS but wanted to see how the impact would fare. When drilling cured concrete full of aggregate, it does work, just not all that fast. Going slow and using water helps a little, but has a hard time with rock. Would be much more suited to brick, tile, or other masonry. Limited by the 1/4" hex shank as anything with more torque would snap the shank, but a good option for softer materials or if you only need a couple holes in a tight space. A good backup option or something to keep in the toolbag.
Scritto da: Daniel
Cut through tile so easily
Drilling into floor tile, made the job a breeze!
Scritto da: Chris Wilkinson
Great masonry bit
Great bit did the job quickly and cleanly. Bosch makes great quality products.

Свързани продукти

hot
Свредло Huot 30650 Buddy
2.2/5

lv 107.99

Свредло Huot 30650 Buddy
2.2/5

lv 107.99

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array