Blackstone 5019 Комплект за преобразуване на пропан в природен газ 10 фута x 3/8 маркуч, 7 мм гаечен ключ, 2 отвора, адаптер за бързо свързване, идеален за барбекю, скара, пещ за пица, нагревател за вътрешен двор (подходящ за избрани модели), сив

Brand:BLACKSTONE

3.8/5

lv
186.11

Можете ли да намерите всички необходими неща за преобразуване на газ на едно място? Звучи малко вероятно, но този комплект за преобразуване на природен газ от Blackstone има всичко. Съдържа два отвора за природен газ за печка. Съдържа и дълъг маркуч за природен газ за скара. В комплекта има дюзов ключ 7 мм. Гаечният ключ е изключително съвместим с отворите. Гаечният ключ улеснява работата с отворите. Този отвор и маркуч могат да се използват на печки. Клиентите могат също да използват този отвор за природен газ на скари. Този комплект от Blackstone съдържа фитинг за бързо свързване. Освен това в този комплект е предоставен и адаптер за бързо свързване. Лесно е да върнете и замените тези продукти. Blackstone предоставя едногодишна гаранция. Процедурата по връщане също е много лесна. Клиентите се радват на лесно връщане за изключителен период. Поемете отговорността за вашите барбекюта. Вземете този комплект за преобразуване на настолен плот Blackstone днес!

Отличен гаранционен период: Blackstone предлага едногодишна гаранция за всички свои продукти. Гаранцията покрива дори маркуча за природен газ. Клиентите са свободни да се възползват от гаранционните предимства за 1 година. Компанията също така осигурява безпроблемно връщане. Улеснението за връщане е валидно за изключителен период. Съдържа гаечен ключ и адаптер: Този комплект отвор за природен газ съдържа два гаечни ключа. Също така съдържа два фитинга за бързо свързване и адаптери. Целият комплект е изключително удобен и ефективен. Елегантният дизайн и леките материали са бонус. Многофункционален: Комплектът може да се използва за печки и скара. Можете също да използвате този отвор за природен газ за нагревател за вътрешен двор. Въпреки това, този газов маркуч и отвор са несъвместими с Blackstone модел 1891. Този газов маркуч е подходящ за природен газ при 7-инчово налягане на водния стълб. Предлага се с два отвора: Комплектът отвор за природен газ на Blackstone съдържа два отвора. Тези отвори могат да помогнат за лесно преобразуване. Отворите са съвместими с повечето котлони или котлони. Двата отвора са малки и елегантен дизайн. Изключително дълъг, за да отговаря на вашата цел: Този комплект за преобразуване на отвора за природен газ има допълнителен маркуч. Маркучът е дълъг 10 фута. Този дълъг маркуч може лесно да се използва на открито. Съвместим е с природен газ. Този маркуч Blackstone е изработен от изключително здрави материали.
Country of Origin China
Customer Reviews 4.8 4.8 out of 5 stars 23 ratings 4.8 out of 5 stars
Item model number 5019
Item Weight 2.88 pounds
Manufacturer Blackstone
Product Dimensions 10.24 x 2.36 x 10.24 inches

3.8

4 Review
5 Star
76
4 Star
24
3 Star
0
2 Star
0
1 Star
0

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Harry S. Rex
Does the job
Does what it's made for.
Scritto da: JL
Works With 22" Adventure Ready With some tweaks.
So if you are looking to convert your 22" Blackstone Adventure Ready portable griddle with Hood and Stand, this will work with some modifications. After trying to remove the H tube out of the griddle forever, there was no way of getting it past the top lip they added to the back of the griddle where the hood would meet, no matter how you angle it, it will not come out. I did not want to cut any parts of the griddle as to not damage the protective paint. SO to gain access to the orfice that is placed inside the front of the H tube.... You will have to drill out a couple rivets on one side of the front face cover where the gas components and control knobs are. I opted for the right side where the propane tube connection is. Use a drill bit about the size of the rivet head hole, make sure the bit isn't as big as the hole the rivet goes through so you dont damage the cover paint. It should be quick, drill enough so you can use a plier or flat head to seperate the rivet head from the stem on either side. You will now be able to move the cover forward at an angle enough so you can drop the fuel nozzle down, in order to undo the smaller propane orifice and replace it with the two larger Natural Gas orifice provided. There are three screws behind each knob that holds the ignitor and fuel control orfice in place on the front face cover. BECAREFUL when tightening the NG orfice, triple check with hand before lightly hand tightening with tool. First one sat nicely and screwed in pretty hand tight. However my 2nd one did not seat right and somehow stripped the screw hole before it even got all the way in. I was not able to hand tighten in before it spun around and start catching a little again. There was some gas leak because of it. I was able to add extra layers of PFTE tape made for NG to help it seal completely and be able to tighten a little more. There were also issues with people stripping the orifice threads so it can go both ways. I feel like the largee cheaper set made for larger griddles with extra orfices would work also with this griddle; but I'm not positive if there are differences in sizes of the orfice screw or even tube connection size. DO NOT FORGET to use sealant or PFTE tape to seal the new orfices and tube connections. For me, I needed a 3/8 FL (Flare) male to 1/2 MIP (Male Iron Pipe) reducing adapter you can get at Home Depot or Lowes to connect the provided quick disconnect adapter to the 1/2" Gas line outside the house. You can get some screws and nuts also at the hardware store to tighten the front face cover back on where the rivets used to be. Look at the screws they use on the H tube if you want something that matches. I just temporarily used an insulated copper wire and looped it through the two holes to hold it in place. The NG needs to be first filled in the H tubes for several seconds when first turning on. Then turn it off and turn the knob to ignite and light the griddle. This is the only way I could light the griddle and has something to do with the design of the H tube and natural gas. Happy grilling, hopes this helps at least one person!
Scritto da: chris adams
Works good
Nice kit and works as should, only problem was a connector leaked and had to be resealed, third time was the charm and no leaks
Scritto da: Annie L Poole
Easy install
After changing the orifice, the flame looks good. The only concern I have , it may work too good. The flame is too high when the control knob is on high. The cooking serface overheats fairly easy.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array