Безопасност 1ˢᵗ Готова за инсталиране Горна врата на стълбите, бяла

Brand:Safety 1st

3.4/5

lv
399.00

Създайте подходящи за деца пространства във вашия дом с готовата за инсталиране Baby Gate Safety 1st. Тази здрава порта за бебета може да се отваря с една ръка и да се регулира, за да пасне на врати и отвори с ширина от 29 до 42 инча. Тази бебешка врата се предлага напълно сглобена за бърз и безпроблемен монтаж за равна монтажна повърхност с ширина най-малко 3,5 инча. Иновативният дизайн не изисква анкери за гипсокартон и може да се монтира с една отвертка само за 15 минути. Дизайнът на бебешката порта без праг премахва риска от спъване за допълнителна безопасност, когато се монтира в горната част на стълбище. Създайте лесно безопасно пространство за децата във вашия дом, като използвате тази 30-инчова регулируема порта за бебета във врати, коридори, стълбища и др. Включва една бебешка врата. Портата за бебета, сертифицирана от JPMA, отговаря на стандартите на ASTM за безопасност и включва едногодишна ограничена гаранция. Safety 1st вярва, че родителството трябва да има по-малко притеснения и повече радостни моменти. Като първият и единствен лидер в безопасността на децата, Safety 1st е тук, за да ви осигури спокойствие, за да можете да прекарвате по-малко време в безпокойство и повече време, наслаждавайки се на всяко първо преживяване с вашето дете. Портата се затваря лесно

EAN: 0884392611613

Категории Безопасност, Gates,

ЗАБЕЛЕЖКА: Този продукт може да се монтира като монтиран хардуер (изисква пробиване на отвори). ЗАБЕЛЕЖКА - Изисква плоска повърхност за монтиране с ширина най-малко 3,5. ИЗМЕРВАНИЯ - Тази предпазна врата е висока 30 инча и може да се регулира, за да пасне на пространства с ширина от 29 до 42 инча. ОТВАРЯНЕ С ЕДНА РЪКА - Работата с една ръка и отварящата се врата улесняват преминаването, а портата се затваря само с едно натискане, което ви позволява да тръгнете бързо. БЕЗ СПЪТВАНЕ - Дизайнът без праг означава, че няма опасност от спъване в горната част на стълбите. БЕЗ ПРОБИВАНЕ - Не е необходимо свредло за монтаж на гипсокартон. Портата включва специални винтове за гипсокартон, така че не са необходими анкери. ИНСТАЛИРАНЕ НА ШАБЛОН - Без измерване, маркиране или необходимост от нивелиране. Портата идва от кутията в едно цяло, за да гарантира, че вашата инсталация ще бъде по-лесна от други хардуерно монтирани порти. МОНТИРАН НА ХАРДУЕР - Предлага се напълно сглобен за безпроблемна инсталация, за да осигури максимална сигурност в горната част на стълбите. Също така може да се използва във врати и други зони, където искате допълнителна сигурност като хардуерно монтирана порта.
Additional product features ‎Walk_through
Batteries required ‎No
Brand Safety 1st
Color White
Country/Region of origin ‎China
Customer Reviews 4.3 4.3 out of 5 stars 1,561 ratings 4.3 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 42 x 2.25 x 30 inches
Item model number ‎‎GA110WHO1
Item Weight 12.16 Pounds
Item Weight ‎12.16 pounds
Material Alloy Steel
Material Type ‎Alloy Steel
Maximum height recommendation ‎30 Inches
Number Of Items ‎1
Product Dimensions ‎42 x 2.25 x 30 inches

3.4

8 Review
5 Star
67
4 Star
15
3 Star
7
2 Star
3
1 Star
7

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: Major West
Great Product If Installed Correctly....Plus a Few Caveats
Most parents/grandparents are more familiar with the pressure-mounted version of the baby gate. No need for a drill. No holes in your wall. Just turn a wheel to expand the gate until it's snug within the opening. They are easy to set up and can easily be taken down and moved to a different location. The downsides are they can be forced loose, or loosen over time which can ultimately pose a hazard. Then there is the threshold bar across the bottom (or trip bar), a trip hazard. For these reasons alone they are not recommended for stairway use. As grandparents, we own several versions of pressure-fitted gates. And we've encountered all of the hazards mentioned, especially tripping on the trip bar. So my search for a baby gate minus the trip bar began in earnest. There are not many gates that are designed without some kind of bar across the bottom. Of course, because of the difference in design, all the ones I found without the bar require attaching each end to the wall with screws, necessitating the need to drill holes in your wall. Ideally, you want the screw to find a stud in the wall for the most secure setup. But not every situation is ideal. So you will also need to rely on anchor bolts. Toggle and butterfly anchors are the best for this situation. Ultimately, I settled on this gate and purchased three of them. They are metal and have a very solid feel to them. The gate is marketed as pre-assembled and ready to install. So when you first pull the gate out of the box the first thing you will notice is the large signage warning you not to remove the zip ties and attached filler boxes until after the gate has been completely installed. Realistically, however, I found there is definitely more work and planning involved to get these gates installed correctly. One caveat, based on other reviewers of this gate, is the anchor screws included in the packaging haven't proven to be very reliable. So I opted not to use them and sprang for toggle bolts instead. Sadly, I was only able to rely on studs for one gate and one side of the second gate and finished up installation with the toggle bolts. My situation required putting the gate in the desired place, marking where the holes for the bolts would go, removing the gate, drilling the holes and inserting the bolts, then putting the gate back in place and securing it. Not exactly 'ready to install.' Another issue is there is some 'movement' in the gate while installing. After installing the first gate, I found that the latch didn't line up precisely because of the give-and-take while trying to secure the gate to the walls. I had to drill new holes and raise one side slightly so the latch would line up correctly. I made sure to pay attention to the latches when installing the remaining gates. I encountered no further problems and all three gates are installed and feel very sturdy. A few other issues - one of the screws was missing from the latch mechanism (pictured) from the first gate. I found the screw at the bottom of the box but when I tried to screw it back into place, I discovered it was stripped. Probably why it fell out during shipment. In fact the other two screws on the same latch were also stripped and I ended up having to superglue the entire latch mechanism so it wouldn't fall apart. The screws on the other two gates were solid, so is there a quality control issue here? Other issues were loose screws elsewhere that were not completely screwed in. So I found myself checking every screw on each gate to make sure each was secure. Also, one of the four brackets on one gate was found broken off. Not a big deal since it doesn't really interfere with the installation process. Overall, I am satisfied with the gates and would recommend them to others as long as it's understood there will probably be a lot more effort involved than their marketing would suggest.
Scritto da: GP
Great without ruining baseboards!
Was hesitant to buy this because of the plastic-y looking and bulky footprint of the wall pieces but we really didn’t want to drill into our baseboards so needed something that would clear the height and go into the wall instead. Perfect compromise here, I’d rather look at that eye sore than drill the base boards or buy expensive adapters. It is sturdy, and safe. I saw other reviews of the gate swinging open with a gentle push and that is not the case. They did not install that gate correctly because this is a secure gate that we’re using at the top of the stairway. I purposely abused it and it did not open at all. We installed it in such a way so that there is 5in of space between the floor and bottom of the gate so that our cat could barely squeeze under, but also so that our baby would not fit through. If that becomes an issue when she gets a little more clever then we can always reinstall it lower but I really don’t think it will be a problem how we have it now. There is also two latches which you can flick up or down to control the direction that the door would swing in. Added bonus, put both of those latches down and I think the door would be extra secure, in addition to the locking mechanism, and would not swing in either direction. Tried uploading a video of everything but it’s taking way too long to upload so
Scritto da: LifeIsShort
Great child gate, not as tall as I thought…
We have a very wide door jam, so this gate works exceptionally well. Measure the width of the door jam if you have narrow woodwork where the gate will go. We have another door where this gate would not have worked. On to the features: It swings both ways and stays open. Great feature! There are two locks. The one on the bottom we never use. We use the top lock/latch to open and close. This is brilliant to have two locks that work independently. It was VERY easy to install. It is very sturdy. Cons: It is not very tall. We are not using this for child safety, but recalling our “climber” son, he would have been over the gate at age 12 months. The screws are going to damage your woodwork, no question about it. You will either need to replace the wood or use a lot of wood filler, sanding and refinishing when you no longer need this gate. We are using it to keep our Ragdoll cat out of our bedroom at night, since my husband recently started experiencing asthma. Our cat is NOT a jumper and is easily trainable, so this gate works well for him, but I cannot imagine this working for any other domestic cat. My cats from the past would have leaped over this with ease, some having the ability to actually jump to the top of door jams. We are very fortunate that our Ragdoll cat follows commands and does not make any attempt to jump over, though he easily could. Not many cats are this agreeable or willing to obey. We are happy with the purchase. It is very well made, passed my husband’s critical eye for quality and does what we expected. When the gate is no longer needed, the fun begins in restoring the door frame.
Scritto da: Oscar P.
Buen producto
Es tal cual la foto, la instalación puede ser algo molesta, ya que los tornillos que trae no son buenos para concreto, pero queda muy bien. El único problema es la manija para abrir la puerta, esta algo dura, y puede complicarse abrirla con una mano que creo es algo esencial en este tipo de puertas.
Scritto da: p_c_a
sturdy gate, seems very safe
Nice gate easy to install and the possibility to remove if when not needed is great...We needed longer screws though...Happy grand parents!!!!
Scritto da: guillermo guerrero
Imversion y seguridad al 100%
Sin lugar a duda es la mejor opción ya que la medida es ajustable y super fácil de instalar recomendadisima
Scritto da: Adriana Fierro Casar
Muy bueno
Buen producto, fácil de instalar y es difícil de abrir por un niño
Scritto da: Alma
Buen producto
Buen producto.

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array