0
0

Обща сума:lv 0.00

Вижте количкатаРазгледайте
LoginRegister
0

Обща сума:lv 0.00

Вижте количкатаРазгледайте
LoginRegister

Bev Rite Beer Line Assembly - 3/16-инчов идентификационен винил - 5 фута с шестостенна гайка Монтаж Прозрачен хромиран месинг

Brand:Bev Rite

3.8/5

lv
57.39

Предварително сглобена линия, готова за прикрепване към вашата система за наливна бира. Общо 5 фута линия с необходимите конектори. Произведено с маркуч за бира, включен в списъка на NSF за храни.

Няма налични единици

EAN: 0741459037024

Категории Дом и кухня, Кухня и трапезария, Приготвяне на бира и вино в домашни условия, Винопроизводство, ,

Произведено в САЩ с маркуч за хранителни цели, включен в списъка на NSF. Дължината на маркуча е 5 фута. Включва шестостенна гайка, шайба, опашка и маркуч. Включва всички компоненти, необходими за свързване на нир или въздушна линия. Предлага се стандартно с прозрачна тръба за бира 5' от 3/16.
Brand Bev Rite
Color Chrome
Country of Origin USA
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 5 x 0.5 x 0.5 inches
Item model number CPCCM101
Manufacturer Chill Passion Inc.
Material Chrome Plated Brass
Product Dimensions 5 x 0.5 x 0.5 inches; 6.74 Ounces

3.8

13 Review
5 Star
82
4 Star
13
3 Star
4
2 Star
1
1 Star
1

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: merryl e hartman
Beer man
I bought this because the other hose was old and yellow and made the beer taste kinda stale. So beer comes out better and taste better.
Scritto da: Tomas Elefsiades
Doesn't come with a hose clamp
Great price but it does say in the description "Includes all components required to make a Beer or air line connection" though it doesn't come with a hose clamp for the other end.
Scritto da: Texas Golfer
Don't make the same mistake I did...
There is nothing wrong with this beer line. Good quality Bevlex 200 3/16 ID and 7/16 OD, My mistake was not realizing the size of the connection installed on the end. I'm using this in a home brew setup with corny kegs and ball lock connections. I now realize what I needed were 1/4 MFL connectors, not these which are much larger. This must be the size needed for a commercial sankey keg connection. No biggie - I was replacing old existing lines from the used kegerator that I just bought, so I just cut these connectors off and replaced with the ones that came with the old lines. I should have just bought a spool of beer line and not tried to save some effort with already made up beer lines. My bad.
Scritto da: aaron winebrenner
Good
Good product. Does not come with a hose clamp for the other end. Solved my foaming issues.
Scritto da: TARTOOT
As expected
Fit perfectly and with an excellent seal. Not much more you can say. I would definitely recommend this line given its low cost and high quality. Update 8/18/2014: I just replaced my lines again and they fit as perfect as they did the first time around (I get away with just pushing the hose onto the nipple with no leaks and no need for clamps of any kind). Because of the price I will be doing this twice a year in addition to regular cleaning; it really makes a difference in taste and reducing the build-up of mold and bacteria (which can ruin an otherwise good beer). BTW, I have a suspicion that the two 1 star reviews, to date, were written by the same dude. Think so?
Scritto da: GDK
Great price and quality beer line.
Ordered this as a direct replacement for my 5' beer line from my keg to the tap. This is a 3/16 inch inner diameter and is the thicker high pressure line. I am currently using this in my mobile tailgate trailer and works fine! It arrived packaged cleanly in sealed packaging with washer included. Did not negatively affect beer flavor. Very pleased with this product.
Scritto da: Mike Eckman
I am happy to report that this was an exact match for ...
I have a kegerator built with parts that I ordered from Micromatic about 5 years ago. Recently, I took it all apart to clean it and I noticed that the beer line was getting yellow and no amount of cleaning or bleach was making it clear again, so I decided to order a replacement. I am happy to report that this was an exact match for the beer line sold to me by Micromatic. The hex nut and rubber washer fit my tapper perfectly and the beer line seemed to be made of the same high quality nylon/plastic as the original. I am happy to be dispensing ice cold tasty beer from my kegerator once again! :)
Scritto da: DonkeyChewingAWaffle
Good Replacement for Kegerator Parts
Fit my tap perfectly. I made sure I needed the 3/16th of an inch beer line... I was a little concerned prior to order that the Hexnut assembly might not fit my tap, but I'm thinking they must be a standard size. I considered rigging something up instead of replacing this particular line in my system, but if you're line is dirty and cleaning just isn't cutting it (like mine) and the non hex nut end where you put it in the tap is getting loose so beer was dripping (like mine)... just buy this and be done with it. It's a good price. Slapped it on in no time and was back to drinking beers.
Scritto da: Tony
Just what I needed.
Good quality!
Scritto da: jim bince
Five Stars
Good
Scritto da: Saulopez
Calidad y funcionalidad, a buen precio !!
Necesitaba comprar este artículo en EEUU, y sorpresivamente salió mas barato que allá! Funciona al 100%. La calidad excede mis expectativas.
Scritto da: Bernardo Riveros
Bien bien
La manguera tiene un espesor de pared increíblemente grande para la aplicación, parece cédula 160, pero funciona como cualquiera esperaría.
Scritto da: Steve from Ottawa
Works as expected
Replaced existing line with this one and it has worked great.

Свързани продукти

hot
Homebrewers Outpost - D1802 Газов колектор - 2 пътен алуминий (Keg King) 1/4 Barb
3/5

lv 83.29

Homebrewers Outpost - D1802 Газов колектор - 2 пътен алуминий (Keg King) 1/4 Barb
3/5

lv 83.29

hot
Bev Rite от неръждаема стомана Разпределител за сплитер Y фитинг 3/8 I.D. отвор
3.1/5

lv 90.70

Bev Rite от неръждаема стомана Разпределител за сплитер Y фитинг 3/8 I.D. отвор
3.1/5

lv 90.70

hot
Bev Rite 120' Coil Jockey Box (1 линия), червена или синя
0/5

lv 1384.78

Bev Rite 120' Coil Jockey Box (1 линия), червена или синя
0/5

lv 1384.78

hot
Азотен регулатор Kegco 3PLHU5NDB, два продукта, хром
0.1/5

lv 448.24

Азотен регулатор Kegco 3PLHU5NDB, два продукта, хром
0.1/5

lv 448.24

hot
Taprite D12-3PA D12-3PA Хромирана резервна капачка за кула за кула с 3 диаметъра
3.5/5

lv 103.28

Taprite D12-3PA D12-3PA Хромирана резервна капачка за кула за кула с 3 диаметъра
3.5/5

lv 103.28

hot
Krome 11346 Homebrew неръждаема бастуна с накрайник (1, A)
3.3/5

lv 123.15

Krome 11346 Homebrew неръждаема бастуна с накрайник (1, A)
3.3/5

lv 123.15

hot
Bev Rite CJB9150H Mini Jockey Box, 9 кварта
3/5

lv 553.93

Bev Rite CJB9150H Mini Jockey Box, 9 кварта
3/5

lv 553.93

hot
Strange Brew CECOMINOD089184 European Keg Beer Coupler Tap Kegerator S System - Дръжка с лост
3.6/5

lv 143.55

Strange Brew CECOMINOD089184 European Keg Beer Coupler Tap Kegerator S System - Дръжка с лост
3.6/5

lv 143.55

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array

Обща сума:lv 0.00

Вижте количкатаРазгледайте

Категории

Всички категории
Меню Категории Близо до Количка

Menu