3M Bare - Уплътнител за метални шевове, 08310, бежов цвят, двукомпонентен, неувисващ, самосмесващ се епоксид, 200 ml/6,75 fl oz Картридж Епоксидно бежово

Brand:3M

3.8/5

lv
172.20

3M™ Bare Metal Seam Sealer 08310 е здрав, гъвкав уплътняващ материал, създаден за уплътняване на фуги от голи метали, като стомана или алуминий, както и грундиран или боядисан метал при ремонт на сблъсък. Двукомпонентният, самосмесващ се епоксиден уплътнител може лесно да се уплътнява, обработва с инструменти или да се нанася с четка върху шевовете и да се втвърдява само за 15 минути. Отличава се с неутрален бежов цвят. Използвайте с ръчен апликатор 3M™ Performance 08117, 3M™ ръчен апликатор с касета 08571 или 3M™ пневматичен апликатор Performance 09930 (продава се отделно). Време за втвърдяване: 1 час Време за обработка: 1-10 минути Време за работа: 10 минути Време за боядисване: 15 минути

Само за промишлена/професионална употреба. Не е за потребителска продажба или употреба. НЕУТРАЛНО БЕЖОВО: Цветът може да намали материала и времето за боядисване. БЪРЗО ВТВЪРЖАВАНЕ: Втвърдява се само за 15 минути за ефективно време в магазина. ФОРМУЛА ЗА ТЕЖКО ТЯЛО: Не увисва за чисти, ефективни инструменти във вертикални и хоризонтални шевове. СПЕЦИАЛНО ФОРМУЛИРАН: Без свиване, напукване или отделяне на газове. ДВУЧЕН ЕПОКСИД: Уплътнителят образува здраво, гъвкаво уплътнение за голи метални съединения.
Brand 3M
Color Beige
Country of Origin USA
Department unisex-adult
Is Discontinued By Manufacturer No
Item model number 08310
Item Weight 6.75 Ounces
Manufacturer 3M
Material Epoxy
Product Dimensions 12 x 9.63 x 5.38 inches; 6.75 Ounces
Style Epoxy

3.8

8 Review
5 Star
86
4 Star
7
3 Star
3
2 Star
1
1 Star
3

Напишете вашето мнение

Вашият имейл няма да бъде публикуван. Всички задължителни полета са маркирани с*

Scritto da: john g.
as described
good price fast delivery
Scritto da: XDAEDAEX
Does the job
Worked its purpose
Scritto da: snatch
Great product if used correctly
I used this for sealing drip rails on a Ranger... very pleased with the results. It does self level quickly and evenly and looks great. I used about 1/2 of the 200ml tube for both sides and probably put in quite a bit more than the factory did...but one tube would easily do both drip rails on a full size truck I think. Since it is self levelling you must dam up the ends with masking tape and make sure the surface itself is level... and plan to grind out some of it on the ends, easily done with a small file. Overnight cure is better, the data sheet says paintable within a short period but it was still a bit tacky after an hour... rock hard the next day and very easy to finish the ends.
Scritto da: Jan
Very "epoxy" like. It's an epoxy after-all
Not sure about self-leveling, was expecting something more "fluidy", the viscosity and stickiness is just like honey and as a matter of fact - as epoxy :). It's likely great glue for gluing separate pieces, but not great for filling voids, due to low viscosity and high stickiness. The nozzle with the cartridge is bulky and exponentially grows with the gun, so not great for tight spaces. The proprietary gun is another story for itself... Should have gone with a smaller package with a thumb applicator instead...
Scritto da: chad caro
Great product
Worked as it should
Scritto da: Max Power
Bought to replace seam sealer on the drip rails of ...
Bought to replace seam sealer on the drip rails of a 71 Chevy pickup. Make sure you level the vehicle - mask off areas you don't want this stuff on and PEEL off the tape ASAP before it sets up or it is there forever (and trying to peel it from under sealer will result in sealer getting pulled up as well). You cannot use this on vertical sections as it flows for at least five minutes before it begins to set up. Ended up buying the heavy bodied seam sealer (3M 8303) to do the vertical sections first (along with a few spots on the firewall & cowl) then used the 08307 for the level areas (came out glass smooth). Wear gloves - it is messy if you are not careful.
Scritto da: Max Power
Bought to replace seam sealer on the drip rails of ...
Bought to replace seam sealer on the drip rails of a 71 Chevy pickup. Make sure you level the vehicle - mask off areas you don't want this stuff on and PEEL off the tape ASAP before it sets up or it is there forever (and trying to peel it from under sealer will result in sealer getting pulled up as well). You cannot use this on vertical sections as it flows for at least five minutes before it begins to set up. Ended up buying the heavy bodied seam sealer (3M 8303) to do the vertical sections first (along with a few spots on the firewall & cowl) then used the 08307 for the level areas (came out glass smooth). Wear gloves - it is messy if you are not careful.
Scritto da: Inland Classic Auto LLC
Spot on
Sticks well to bare metal. Quick drying

Свързани продукти

Открийте нашата международна мрежа

Изпращаме до 28 държави, над 200 000 продукта. Бъдете в течение, абонирайте се за бюлетина.

Array